Experiences with Timber Grow Lights

Morth

Morth

Well-Known Member
That's sweet grats man! Came home to a little project myself http://www.rapidled.com/10-solderless-led-low-profile-rooting-kit/ supposedly you can connect 4 with a bar and equal a 5' x 3' T5 fixture but only use 180w instead of 400w and no replacing bulbs for 5 years. Initial cost is about the same but should save money in the long run and have a better spectrum less heat and that's what it's all about right? Not about timber but just wanted to share lol know what I will be doing tomorrow after my res change! and it's almost time for the growtube round table YAY great friday
 

Attachments

Bountykiller420

Bountykiller420

Well-Known Member
I too have been looking at the Timber lights for awhile now, ive emailed them through the website corner tab, no response, just wanted some more answers on some of the framework and par readings, cob spacing, frame size, no response and its been a week, Ive sent a few emails to them, not knocking the company i did get a rep once through the corner chat tab on the timber site and asked a few questions but i didnt ask all i needed to ask...too stoned lol...anyways, i did end up submitting a order today with Timber but for a 5 cob kit without the framework, seeing no one would get back to me on the questions i had asked regarding the frame size mostly, regardless, i knew what i wanted, Timber had it the cheapest by far compared to anywhere, unless your buying from china and even then its compareable, All in all not a big deal, i saved a little money not getting the frame, plus i get to put it together itll be fun, they couldnt make it any eaier for you, pre wired potentiometer, quick connects, fused power cord, and cheaper than the rest....how could you not want to buy from these guys
 
Bountykiller420

Bountykiller420

Well-Known Member
250 Watt Cree CXB3590 (5) COB Grow Light Kit
://timbergrowlights.com/250-watt-cree-cxb3590-5-cob-grow-light-kit/

$500 + $40 shipping, thats the kit I ordered but I will need to build the frame for it which is gonna be another $25 for the angled aluminum and $20 for a rivet gun

So around $600 total and will need to assemble, ill post pics when its all put together

Plus dropped over $100 on seeds and another $500+ on grow tent, nutes, ph and ppm meters, soil, fans ducting, lot of misc stuff needed, Ill post pics of the build when i get the lights in
 
MasterMiller

MasterMiller

Well-Known Member
sierranevadaca said:
I've been running timbers 200 w citizen kit for a few weeks now. Happy with the light so far. Frame and installation was cake, the dimmer is super badass. My favorite feature. Gonna order a second one in the future
Click to expand...
There isn't alot of info about these cobs so I am eager to see what others do too. Swweeeeeet.
 
Tim Fox

Tim Fox

Well-Known Member
txponto said:
Never, in any other hobby that i have had, have I seen people so mindlessly promote a product so fiercely and mindlessly as this "COB" movement. 9/10 posts on the topic lean to if you don't cob you shouldn't grow. It's pathetic.
Click to expand...
are cold hard facts and statistics "Mindless"
how about all the completed grows under cobs for the past 2 years,, l with astonishing success,,, were those grows "mindless"?
 
RainDan

RainDan

Well-Known Member
Bountykiller420 said:
I too have been looking at the Timber lights for awhile now, ive emailed them through the website corner tab, no response, just wanted some more answers on some of the framework and par readings, cob spacing, frame size, no response and its been a week, Ive sent a few emails to them, not knocking the company i did get a rep once through the corner chat tab on the timber site and asked a few questions but i didnt ask all i needed to ask...too stoned lol...anyways, i did end up submitting a order today with Timber but for a 5 cob kit without the framework, seeing no one would get back to me on the questions i had asked regarding the frame size mostly, regardless, i knew what i wanted, Timber had it the cheapest by far compared to anywhere, unless your buying from china and even then its compareable, All in all not a big deal, i saved a little money not getting the frame, plus i get to put it together itll be fun, they couldnt make it any eaier for you, pre wired potentiometer, quick connects, fused power cord, and cheaper than the rest....how could you not want to buy from these guys
Click to expand...
Hello @Bountykiller420

I did receive your email on Wednesday and apologize I am just answering it this morning I am a little bit behind. I am in the office this weekend if you need anything else. Wanted to make sure that all of your questions are answered and that you end up purchasing whatever product works best for your situation.

Feel free to reach me here, by PM or email. You can also reach me by phone and/or chat between 8 am and 4pm PST M-F as well if you would rather speak in person. If those times don't work, we can also set up time after hours to speak.

Have a good rest of the weekend.

Regards,
Dan
 
Last edited:
nfhiggs

nfhiggs

Well-Known Member
Bountykiller420 said:
250 Watt Cree CXB3590 (5) COB Grow Light Kit
://timbergrowlights.com/250-watt-cree-cxb3590-5-cob-grow-light-kit/

$500 + $40 shipping, thats the kit I ordered but I will need to build the frame for it which is gonna be another $25 for the angled aluminum and $20 for a rivet gun

So around $600 total and will need to assemble, ill post pics when its all put together

Plus dropped over $100 on seeds and another $500+ on grow tent, nutes, ph and ppm meters, soil, fans ducting, lot of misc stuff needed, Ill post pics of the build when i get the lights in
Click to expand...
Rivet gun? just use screws/nuts/bolts. That way you can change the configuration and/or add more modules later on.
 
MasterMiller

MasterMiller

Well-Known Member
Bountykiller420 said:
I too have been looking at the Timber lights for awhile now, ive emailed them through the website corner tab, no response, just wanted some more answers on some of the framework and par readings, cob spacing, frame size, no response and its been a week, Ive sent a few emails to them, not knocking the company i did get a rep once through the corner chat tab on the timber site and asked a few questions but i didnt ask all i needed to ask...too stoned lol...anyways, i did end up submitting a order today with Timber but for a 5 cob kit without the framework, seeing no one would get back to me on the questions i had asked regarding the frame size mostly, regardless, i knew what i wanted, Timber had it the cheapest by far compared to anywhere, unless your buying from china and even then its compareable, All in all not a big deal, i saved a little money not getting the frame, plus i get to put it together itll be fun, they couldnt make it any eaier for you, pre wired potentiometer, quick connects, fused power cord, and cheaper than the rest....how could you not want to buy from these guys
Click to expand...
Not sure but I also took them awhile to get back to me on the chat part but email RainDan direct and he was replying to my emails within the hour of sending
 
BabyAndaconda420

BabyAndaconda420

Well-Known Member
txponto said:
Never, in any other hobby that i have had, have I seen people so mindlessly promote a product so fiercely and mindlessly as this "COB" movement. 9/10 posts on the topic lean to if you don't cob you shouldn't grow. It's pathetic.
Click to expand...
MasterMiller said:
I'm using and will still continue to use my two blurple p300s. I'm fortunate enough to have saved my cash to be able to mess around with two different types of leds. Didn't stop me.
Click to expand...
Shit those p300 are fucking very good lights some of the best in my opinion
 
BabyAndaconda420

BabyAndaconda420

Well-Known Member
Morth said:
That's sweet grats man! Came home to a little project myself http://www.rapidled.com/10-solderless-led-low-profile-rooting-kit/ supposedly you can connect 4 with a bar and equal a 5' x 3' T5 fixture but only use 180w instead of 400w and no replacing bulbs for 5 years. Initial cost is about the same but should save money in the long run and have a better spectrum less heat and that's what it's all about right? Not about timber but just wanted to share lol know what I will be doing tomorrow after my res change! and it's almost time for the growtube round table YAY great friday
Click to expand...
65594095.jpg
 
Bountykiller420

Bountykiller420

Well-Known Member
RainDan said:
Hello @Bountykiller420

I did receive your email on Wednesday and apologize I am just answering it this morning I am a little bit behind. I am in the office this weekend if you need anything else. Wanted to make sure that all of your questions are answered and that you end up purchasing whatever product works best for your situation.

Feel free to reach me here, by PM or email. You can also reach me by phone and/or chat between 8 am and 4pm PST M-F as well if you would rather speak in person. If those times don't work, we can also set up time after hours to speak.

Have a good rest of the weekend.

Regards,
Dan
Click to expand...
Awesome, I'll PM you, I hear ya your a busy man, I am just eager to get the ball rollin here, i did place a order already ill pm you the details but figured i could start with the cxb3590 250watt 5 cob kit and always addon later
 
You must log in or register to reply here.
Top