Dr.funkenstien
Active Member
I got an 18 gallon and a couple 5 gallons think I finally got my diy water chiller ok for the 18 gal, just doing the ice bottle shuffle with the buckets. So it doesn't need to be real high to make the splash?
nope. even an inch or two above the water line will work. obviously, more would be better for even more splash.I got an 18 gallon and a couple 5 gallons think I finally got my diy water chiller ok for the 18 gal, just doing the ice bottle shuffle with the buckets. So it doesn't need to be real high to make the splash?
OK so I have been thinking. What about this I have water pumping from the cooling unit into like some air line, coil it up poke holes in it every so often so it shoots into the res and rig it to the top of the bucket. When it fills up to a certain point it goes in the return back to the cooling unit. And some airstones in the bottom for back up. Does that sound workable or am I getting the wrong idea?nope. even an inch or two above the water line will work. obviously, more would be better for even more splash.
I think the pump I have is the 100gph one of those. Thanks a lot for the info, most appreciatedsomething like this is all you need: 66 gph model for 8 bucks, some 1/2" tubing (black) and 2 90deg elbows. buy 2 so you have a spare. ditch the air pump and air stones and put this in the tote with the plants. also try to find an aquarium filter bag so the roots don't get sucked into the pump
http://growershouse.com/ecoplus-submersible-water-pumps-under-water
that should work fine. you just dont' want to get a huge pump because it will give off a lot of heat.I think the pump I have is the 100gph one of those. Thanks a lot for the info, most appreciated
Running just a tube is called fluming, idk about the million holes...and more aistones aren't always more O2. How many LPM's is your pump?...How many different buckets/containers are you using the air pump to aerate?....If a stone is not working at all, there is either another way with less resistance for the air to travel, or something is blocking the output of air, which if brand new I doubt. The difference in airstone size is all about how much air and air pressure that will be traveling through them. I use two 4inch active aqua micropore ceramic airstones for 60lpm in a single bucket. If I were to hook up 15 of those airstones, they wouldn't bubble too much. If I only did one, it'd probably blow water out of my bucket lol....more surface tension being broke creates the extra O2 molecules, however, fine bubbles break surface tension more so than less, but larger air bubbles. You will see larger air bubbles when using an airpump pumping too many LPM's through an airstone, if I am correct (emphasis on if). I'd need more information to give an answer tailored to your situation, like what LPM is your pump, how many bucket sites are you running, what is the name brand and type of airstone, so on and so forth....I personally love the good-ol' ceramic micropore stones, they weigh themselves down nicely and can be boiled and resused, although I just buy new ones once a grow.I was thinking, as long as the hose lengths are equal, we'll, do you know anything about a difuser I believe they call it. Blocking the end of the tube and poking a trillion holes with a needle, would that be kosher?
Yeah the pump is above the rest. Since I posted I have been doing my system over and over till I could get it right for me. I had 6 five gallon buckets, one air pump but a 6 way splitter. I ended up moving 4 plants to an 18 gallon tote. I plugged up 2 parts on the splitter and put 4 airstones of various sizes in it. It's bubbling like crazy. For the other 2 buckets I have a separate dual pump them. I was having temp issues and it made more sense for me to do it like this. This is the pump I have.Running just a tube is called fluming, idk about the million holes...and more aistones aren't always more O2. How many LPM's is your pump?...How many different buckets/containers are you using the air pump to aerate?....If a stone is not working at all, there is either another way with less resistance for the air to travel, or something is blocking the output of air, which if brand new I doubt. The difference in airstone size is all about how much air and air pressure that will be traveling through them. I use two 4inch active aqua micropore ceramic airstones for 60lpm in a single bucket. If I were to hook up 15 of those airstones, they wouldn't bubble too much. If I only did one, it'd probably blow water out of my bucket lol....more surface tension being broke creates the extra O2 molecules, however, fine bubbles break surface tension more so than less, but larger air bubbles. You will see larger air bubbles when using an airpump pumping too many LPM's through an airstone, if I am correct (emphasis on if). I'd need more information to give an answer tailored to your situation, like what LPM is your pump, how many bucket sites are you running, what is the name brand and type of airstone, so on and so forth....I personally love the good-ol' ceramic micropore stones, they weigh themselves down nicely and can be boiled and resused, although I just buy new ones once a grow.
P.S. Make sure your pump is not too far below your buckets (doubt it is, but worth saying)...idk exactly how it works, but I know its better to keep your pump level with your airstones and maybe even the top of your buckets, idk on that one. Mine pump is level with the top of my buckets.
Nope, it just seemed like they all worked differently depending on where they were. I thought maybe cause some were big and some were small but I couldn't find out any rhyme or reason for it. But since I threw them all in one bucket it's bubbling like crazyThat is a growing trend for people, especially with heat issues, doing RDWC or standalones even I guess. But personally, I like the good ol' air pump, lol...and as long as it's bubbling and broiling about you're good, you can still experiment with more/less airstones. Did you find the cause of the faulty airstone(s) not working?