No, you need constant ventilation & humidity control . You don't want stale air, I think that could lead to mold issues.When your lights go out from the timer in your tent, should the outtake fan shut off as well? the oscillating fans stay on but not sure about the filter/fan combo?
Weed ain't no C4 plant ...turn them off safe the cashWhen your lights go out from the timer in your tent, should the outtake fan shut off as well? the oscillating fans stay on but not sure about the filter/fan combo?
Weed ain't no C4 plant ...turn them off safe the cash
weed is C3 she don't save no C02
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3550578/
good
are you saying leave the outtake fan off with the lights and keep the air moving through the oscillating fans?
Thanks, man !
You don't get your RH climbing in the dark like happens to me? Just evaporation off the surface of the pots is enough to get it way up around 80% according to my High/Low temp and RH meter.You do one last exhaust at lights out and you don't need to run any venting till lights on!
Even gassing........Circulation fans only.
Yea but at night it's not affecting the plant like during the day - No photosynthesis to be effected! It should be taken care of by the first exhaust at lights on! The worry about RH can also be PM. Constant attention to RH is overseen by a proper sized dehumidifier. In a tent situation. You simply set a timer to run all lights on and then exhaust every 2 hrs for a cpl of min during lights out if your actually getting that problem.........I run some tents in my breeding area. They all shut off at an hr after lights out, and turn on an hr after lights on. I've got no problems in that place - tent or open room.You don't get your RH climbing in the dark like happens to me? Just evaporation off the surface of the pots is enough to get it way up around 80% according to my High/Low temp and RH meter.
First you said just one exhaust at lights out & now you're saying every 2 hours ( if needed) thing is no 2 environments will be the same. Running a box fan in a hot tent during lights out won't cut it for everyone, not my tent I have to run the inline ( on low speed) the entire lights out or the humidity will rise to 80 ( with 2 regular fans running) Old Meds is right about this one. I tried what you said... the humidity almost knocked me out when I opened that tent.Yea but at night it's not affecting the plant like during the day - No photosynthesis to be effected! It should be taken care of by the first exhaust at lights on! The worry about RH can also be PM. Constant attention to RH is overseen by a proper sized dehumidifier. In a tent situation. You simply set a timer to run all lights on and then exhaust every 2 hrs for a cpl of min during lights out if your actually getting that problem.........I run some tents in my breeding area. They all shut off at an hr after lights out, and turn on an hr after lights on. I've got no problems in that place - tent or open room.
Secondly: If your gassing, the environmental controller is still doing it's job...Just not triggering gas to hit set levels in the dark.
Reset it to shut down an hr after the lights out and try it like that.... I give a 2 hr method for those who fear RH for PM reasons. The plant and the RH, have very little to do with each other at night! RH is a photosynthesis regulator that is linked to the temp, and only has impact effect during lights on or when the plant is photosynthesizing.
First you said just one exhaust at lights out & now you're saying every 2 hours ( if needed) thing is no 2 environments will be the same. Running a box fan in a hot tent during lights out won't cut it for everyone, not my tent I have to run the inline ( on low speed) the entire lights out or the humidity will rise to 80 ( with 2 regular fans running) Old Meds is right about this one. I tried what you said... the humidity almost knocked me out when I opened that tent.
Ok , I'll try this .Reset it to shut down an hr after the lights out and try it like that.... I give a 2 hr method for those who fear RH for PM reasons. The plant and the RH, have very little to do with each other at night! RH is a photosynthesis regulator that is linked to the temp, and only has impact effect during lights on or when the plant is photosynthesizing.
I also control my RH by dehuey.....I understand tents can be great, I use them for specific use, in a specific place. Mine run as stated. hr after lights out and restart for the day, an hr after lights on. I'm doing it like nature does at night. Initial drop and a rise to a dew point in the mourning. I don't get a "dew" but you get the idea, right?
For production. Exhaust only cycles to pull Co2 into the room.....RH is controlled by dehuey - 24-7....Different place altogether.
I'm here to learn new things. It's forever changing and I would like to stay updated, so I'm open to doing things different.Cool that you would try it!
If you don't care for it? Please do as you need to for your own comfort!
Gasing ? I need all the info I can get. I love to be informed. Greatly appreciatedYea but at night it's not affecting the plant like during the day - No photosynthesis to be effected! It should be taken care of by the first exhaust at lights on! The worry about RH can also be PM. Constant attention to RH is overseen by a proper sized dehumidifier. In a tent situation. You simply set a timer to run all lights on and then exhaust every 2 hrs for a cpl of min during lights out if your actually getting that problem.........I run some tents in my breeding area. They all shut off at an hr after lights out, and turn on an hr after lights on. I've got no problems in that place - tent or open room.
Secondly: If your gassing, the environmental controller is still doing it's job...Just not triggering gas to hit set levels in the dark.
Using Co2.Gasing ? I need all the info I can get. I love to be informed. Greatly appreciated