ShootToMaim
Well-Known Member
Ive been playing around with concentrates for awhile and recently did an ethanol winterization this is how:
6 grams of purged Bho. Already very tasty Lets see if we cant clean it up. This is that same 6 grams desolved in about 250 ml of 190 proof ethanol.
After 48 hours in the freezer cloudy white precipitate has crashed out of the ethanol.
This is a 500 ml buchner funnel and my vacuum chamber empty. i pumped the air from my chamber and hooked it up to the vacuum port of my funnel. i used this instead of a vacuum pump so that i could control the vacuum by feathering the valves on my chamber.
After filtering the solution i placed it in a pyrex dish and placed a furnace filter over top to keep out debris. i then set a fan blowing over the ethanol.
After most of the alcohol had evaporated i was left with a chalky white residue which was extremely bad looking. This was just left over water from the ethanol and disappeared once fully dry. What was left in the pyrex was extremely hard and tacky, next time i will scrape it up before it has a chance to fully dry.
After 48 hours in the vacuum chamber I ended up with 5.5 grams of clear rock hard shatter.
6 grams of purged Bho. Already very tasty Lets see if we cant clean it up. This is that same 6 grams desolved in about 250 ml of 190 proof ethanol.
After 48 hours in the freezer cloudy white precipitate has crashed out of the ethanol.
This is a 500 ml buchner funnel and my vacuum chamber empty. i pumped the air from my chamber and hooked it up to the vacuum port of my funnel. i used this instead of a vacuum pump so that i could control the vacuum by feathering the valves on my chamber.
After filtering the solution i placed it in a pyrex dish and placed a furnace filter over top to keep out debris. i then set a fan blowing over the ethanol.
After most of the alcohol had evaporated i was left with a chalky white residue which was extremely bad looking. This was just left over water from the ethanol and disappeared once fully dry. What was left in the pyrex was extremely hard and tacky, next time i will scrape it up before it has a chance to fully dry.
After 48 hours in the vacuum chamber I ended up with 5.5 grams of clear rock hard shatter.
Attachments
-
1.6 MB Views: 7