getawaymountain 16/17 seeders

[getawaymountain]

Nice roots.

I'm a little unclear though...
Did you use seaweed juice as an additive to cloner water or was the entire reservoir in the cloner nothing but seaweed juice?

used with the water in the machine one cup of juice to 5 gallons water rob roy no clonex or rapid start

 

[getawaymountain]

U buy truck load of pre made bagged potting soil?

ya i buy promix and happy frog by the pallet

 

[papajohn]

Say no more

 

[Rob Roy]

used with the water in the machine one cup of juice to 5 gallons water rob roy no clonex or rapid start

Thanks for clarifying.

The roots seem to like it.

 

[DankBudzzz]

used with the water in the machine one cup of juice to 5 gallons water rob roy no clonex or rapid start

I've always struggled cloning but with a little juice in some tap water I got 100 percent rate within 10 days, soil I was at maybe 50 percent or less and it would take 3 weeks. My juice is homemade and not perfected yet so I can only imagine getaways is the rolls Royce

 

[thumper60]

used with the water in the machine one cup of juice to 5 gallons water rob roy no clonex or rapid start

iam buying a cloner this fall,done dealing with peat pots an promix in domes half rot before ready

 

[DankBudzzz]

iam buying a cloner this fall,done dealing with peat pots an promix in domes half rot before ready

I made my own 20 site clones for less then 20 bucks

 

[natureboygrower]

I made my own 20 site clones for less then 20 bucks

care to share your plans?

 

[natureboygrower]

care to share your plans?

found some plans.same idea as aeroponics,smaller scale.think i'll try building one myself.

 

[DankBudzzz]

care to share your plans?

Pretty simple and I'm not handy at all. Grabbed a Tupperware at Wally World, drilled twenty holes 1.5 inch I think ? I had the drill and attachment. Bought a air pump and air stone with line for like 16 bucks. Bought the plugs at hydro store for super cheap like 2 bucks for twenty neoprene but those were on flash sale. Super cheap and dimple just bubbles air into the water.

 

[natureboygrower]

Pretty simple and I'm not handy at all. Grabbed a Tupperware at Wally World, drilled twenty holes 1.5 inch I think ? I had the drill and attachment. Bought a air pump and air stone with line for like 16 bucks. Bought the plugs at hydro store for super cheap like 2 bucks for twenty neoprene but those were on flash sale. Super cheap and dimple just bubbles air into the water.

cool ,so you went with an air pump and stones rather than spinners and a submersible pump?i built an aeroponics tub years ago but never had an indoor grow

 

[DankBudzzz]

cool ,so you went with an air pump and stones rather than spinners and a submersible pump?i built an aeroponics tub years ago but never had an indoor grow

A lot quicker, cheaper and just as effective also I'm not super handy so aeroponics would be a little more difficult to source part and build

 

[natureboygrower]

A lot quicker, cheaper and just as effective also I'm not super handy so aeroponics would be a little more difficult to source part and build

awesome,thanks for the reply,Cap

 

[Rob Roy]

iam buying a cloner this fall,done dealing with peat pots an promix in domes half rot before ready

After many years of doing clones the old school way, we went the aeroponic route about 3 years ago and have been pretty happy. If you clean them good between every run, success rate is near 100%. Amazon has a decent selection too.

Almost time for me to get another one though...the pumps do age. Better to replace them before they die at an inopportune time.

 

[Rob Roy]

Pretty simple and I'm not handy at all. Grabbed a Tupperware at Wally World, drilled twenty holes 1.5 inch I think ? I had the drill and attachment. Bought a air pump and air stone with line for like 16 bucks. Bought the plugs at hydro store for super cheap like 2 bucks for twenty neoprene but those were on flash sale. Super cheap and dimple just bubbles air into the water.

Before we bought a "store bought" cloner , we did pretty much the same thing except we used a pump and pvc sprayer set up rather than air stones. Never got the right plug sizes though so we beefed up the neoprene plugs with duct tape. It worked, but was ugly as hell. Lol.

 

[getawaymountain]

we got 2 cloning machines and would never go the old way again i got freinds that still go and use cloning powder and promix takes forever and they only get a few weak growing clones out of a whole bunch they start ( try to start ) every time

 

[thumper60]

we got 2 cloning machines and would never go the old way again i got freinds that still go and use cloning powder and promix takes forever and they only get a few weak growing clones out of a whole bunch they start ( try to start ) every time

I get good strong cuts,but takes 2 weeks an20-30 percent loss depending on strain gotta bleach the peat pots before using or they mold 7-10 days

 

[thumper60]

I've always struggled cloning but with a little juice in some tap water I got 100 percent rate within 10 days, soil I was at maybe 50 percent or less and it would take 3 weeks. My juice is homemade and not perfected yet so I can only imagine getaways is the rolls Royce

what u do go to the beach an grab the kelp,i used to do that but never brewed it just tossed it in the compost pile

 

[getawaymountain]

the plants in yard are all started to bud except the jamacian dream and just keeps growing we had heavy rain ,wind and thunder storms last night and never broke a branch thanks to the netting we got them wrapped with

 

[socaljoe]

Would you look at those beauties...well done, sir.