I'm building some lights with slate 3 triple heatsinks right now, two boards in parallel and one HLG-320H-54A driver per heatsink.. I'm wiring them in parallel like in ledgardener's video here @ 20:25
. In the video, he shows the DC leads of the driver connecting to the same side of both boards, the right side where the horticulturelightinggroup.com label is printed. Does this matter? There are + and - connectors on both sides of each board. Can I connect the DC leads to the connectors on the right side of one board and the ones on the left side of the other board, as long as it's still +(red) to + and -(black) to - ? In other words, the boards are mounted on each end of the heatsink and right now they're in the same orientation, with the hlg label on the bottom right of each board. I want the red and black wires coming out of each board to point toward the middle of the heatsinks, so they can go through holes in the heatsink to the back side and connect to the driver, which is mounted in the middle. Do I need to flip one board 180 degrees so the wires connect to the right hand side of each board, or can I connect to either side of the board?
@robincnn @Stephenj37826