Club 600

ҖҗlegilizeitҗҖ

Well-Known Member
Finally done, 1000w 4x4 scrog
Two Dinafem critical +, and two Pakistan valley
7g fabric pots,

Soil
1/2 cup lime
22 gallons ff of
2 gallons perlite
2 cup mykos
1/4 cup azos
3 gallons lite warrior

Nutes
Full ff trio, ff soulubales, calmag, and Cyto plus (kelp extract and amino acids)

To water the plants with such a low screen I had to install a water pump in a 5 g bucket that ran hoses to each plant.
20170613_215820.jpg 20170617_233437.jpg 20170617_235302.jpg 20170621_221340.jpg 20170625_220403.jpg 20170708_120232.jpg GEDC6962.JPG 20170726_225318.jpg 20170726_225404.jpg 20170731_220522.jpg
 

Tx-Peanutt

Well-Known Member
Finally done, 1000w 4x4 scrog
Two Dinafem critical +, and two Pakistan valley
7g fabric pots,

Soil
1/2 cup lime
22 gallons ff of
2 gallons perlite
2 cup mykos
1/4 cup azos
3 gallons lite warrior

Nutes
Full ff trio, ff soulubales, calmag, and Cyto plus (kelp extract and amino acids)

To water the plants with such a low screen I had to install a water pump in a 5 g bucket that ran hoses to each plant.
View attachment 3991345 View attachment 3991346 View attachment 3991347 View attachment 3991349 View attachment 3991350 View attachment 3991354 View attachment 3991355 View attachment 3991356 View attachment 3991357 View attachment 3991358
You sure did do a good job bud!!! :hump::clap:Job well done they are very nice looking buds at the end of grow and from what I can see no deficiencies....also does that purple light help any at all
 
Last edited:

Tx-Peanutt

Well-Known Member
Have no idea if that purple light does anything haha
I just figured if anything it would add a larger spectrum of light to the grow.[/QUOT
I was just wondering cuz I seen a light like that on eBay and I was going to try that same setup that u got...Lol I have a 600 watt Vivosun setup similar to yours...Does yours give u different settings like 250/400/600 watts?
 

ҖҗlegilizeitҗҖ

Well-Known Member
Mine gives 600, 750, and 1000
Works great! I did a lot of research on everything I bought and it all turned out perfect. Had a 8" 720 cfm exhaust, 175 cfm intake, 1000 w mh for veg and 1000 w hps for flower. Had some nutrient deffeciency with the large plant that was growing quick, I also should of been watering with slightly high ph. Otherwise the grow turned out great, 8 weeks of flower and I was seeing amber trichomes
 

curious old fart

Well-Known Member
This is one of the reasons that people have a negative opinion of mj. A constant barrage of lies touted as fact. similar to today's media.

'What you do with your life is up to you': Bizarre US film to scare 1960s teens off smoking marijuana shows spaced-out 'potheads' driving over cliffs and being tuned into monsters


A bizarre 1960s film shown to teens in the US has emerged featuring a Beatles-esque figure who claims to be presenting an unbiased view of the drug, before painting a horrifying vision of it.

:peace:
cof
 

Tx-Peanutt

Well-Known Member
Mine gives 600, 750, and 1000
Works great! I did a lot of research on everything I bought and it all turned out perfect. Had a 8" 720 cfm exhaust, 175 cfm intake, 1000 w mh for veg and 1000 w hps for flower. Had some nutrient deffeciency with the large plant that was growing quick, I also should of been watering with slightly high ph. Otherwise the grow turned out great, 8 weeks of flower and I was seeing amber trichomes
Good deal ,mine only goes up to 600 u must have gotten the step above the one I got. Yeah I did the same thing I just didn't wanna spend all that money I guess I should have atleast I could have up graded
 

ҖҗlegilizeitҗҖ

Well-Known Member
Good deal ,mine only goes up to 600 u must have gotten the step above the one I got. Yeah I did the same thing I just didn't wanna spend all that money I guess I should have atleast I could have up graded
1000 just produces more, but 600 is more efficient in terms of lumens/watt.
I went for the 1000 because I figured I could just dim it, and it only cost 60 more if I remember right
 

mntnmdr7

Active Member
Hey guys...my girls are lookin a little pale and I was hoping y'all could give me a little help. I have 3 White widows which are 5 weeks into flowering. I'm using coco coir with gen. organics nutes at half strength with added terminator. Last feeding I tried at full strength and I noticed the tips discolored a bit so I put it back to half strength. Light was at 16" from tops so I moved it up a couple inches at a time to see if it could be light burn. The light is currently at 22". If any more info is needed please lmk. Any advice is appreciated.
 

Attachments

green217

Well-Known Member
I ran General organics, I ran full strength every watering once the plant was mature. I did have to use calm with it. I also had iron issues, gh calmg solved my issues for both
 

Mohican

Well-Known Member
Epsom is good in flower. Mag and sulfur. A little goes a long way.

Or just give them PK and ignore the pale. Resin is what you want to see.
 

Mohican

Well-Known Member
You are welcome! What kind of light are you using? I ask because using LEDs for some reason makes the plant want more Cal/Mag. I didn't try Epsom so I am not sure if it would have worked fine without the Calcium.
 

mntnmdr7

Active Member
You are welcome! What kind of light are you using? I ask because using LEDs for some reason makes the plant want more Cal/Mag. I didn't try Epsom so I am not sure if it would have worked fine without the Calcium.
I'm using a 6" air cooled xtrasun hood w/ xtrasun hps bulb
 

oldman60

Well-Known Member
I'm using a 6" air cooled xtrasun hood w/ xtrasun hps bulb
What wattage? I also use coir and I always use calmag+ every feeding
been growing in coir for 3 years now and the main thing with it is that coir binds
calcium and iron so you need a constant addition of both.

:peace:
 
Top