Thanks for the reply, i have it all figured out now and working like a charmcap the bulkhead and run your hose from the top...or install a solenoid valve inline. on our big systems we use solenoid valves controlled with a 9 zone sprinkler timer.
Thanks for the reply, i have it all figured out now and working like a charmcap the bulkhead and run your hose from the top...or install a solenoid valve inline. on our big systems we use solenoid valves controlled with a 9 zone sprinkler timer.
If you're open to it and have the time throw up some pics!Im using a 1/4 horse pump going to 3/4 pvc out the top and into the room to 1/2 in hose with 46 netafim sprayers and works perfect
Well- that explains why your shave isn't even...
As my GF says, the sign on master bath reads "Closed Until Further Notice".
I tell her lets build another house and put me in a DTW room, 10x10 and I will be all smiles and so would she, no closed bathroom.
Those are Tee's at the ends of the lines and that is .25" rubber hose.
Thanks for response. I meant the taps in the big poly loop on top of the fan.Those are Tee's at the ends of the lines and that is .25" rubber hose.
Yes, in the manifold there is a strainer.
Pics please, sounds cool.Thanks for response. I meant the taps in the big poly loop on top of the fan.
But I ended up buying and octorig of sorts. Has a FPT 1/2" inlet that runs to 8 1/4" barbed fittings for air tubing to connect to.
This is it. They were pricey tho at $15 per. Though my hydro store ended up charging me $1.70 for 100ft of 1/4" tubing so it worked out in the end.Pics please, sounds cool.
The taps were just regular drip hose taps, 1/4"
GR
A simple 1/4 inch barbed elbow coming out of the main line still in the res..but above the water. Pointed down to shoot a "jet" of water back in. Simple but effective.So what anti siphon devices are yall using?
Yeah I was just going to puncture the 1/2" poly line above the water. Was just wondering if others actually used a vacuum breakerA simple 1/4 inch barbed elbow coming out of the main line still in the res..but above the water. Pointed down to shoot a "jet" of water back in. Simple but effective.
Use an elbow ponted down back in the tank. A simple hole might shoot water everywhere when the pump kicks on.Yeah I was just going to puncture the 1/2" poly line above the water. Was just wondering if others actually used a vacuum breaker
I do like that idea better. My res has a lid thoUse an elbow ponted down back in the tank. A simple hole might shoot water everywhere when the pump kicks on.
i just ran my tubing thru the top of my res below the lid so it's higher than the pump and the plants.So what anti siphon devices are yall using?