help wiring thermostat

bodyya

Member
hi guys,

complete noob here. have been lurking here for a while now and have to say this place is truly a wealth of information.

was wondering if anyone could help. i have a tube heater installed and have bought a thermostat to control it but i have literally no idea how to wire it in with the heater.

the heater is just a simple plug in to mains job. the thermostat has 4 lines inside , N N 1 2.....not sure what wires need to from mains to thermostat and thermostat to heater.

any help would be much appreciated
 

bodyya

Member
hi, apologies if wasn't clear .this is pic of inside of thermostat. at the moment the heater cable just plugs straight into mains and is on timer . but i would like to make so thermostat controls it to only come on when necessary.

20171113_183101.jpg
 

Uncle Reefer

Well-Known Member
At first look, I would say 1 is your hot in and 2 is your hot out and the n's are both neutral. However, I am not 100%, can you flip it over so I know what it is we are working with?
 

Lite

Well-Known Member
thats a super strange thermostat. I would say look up the manual before you light it on fire somehow.
is 1 in and 2 out? with N and N being commons? I dont see any other 24v input anywhere.
 

bodyya

Member
At first look, I would say 1 is your hot in and 2 is your hot out and the n's are both neutral. However, I am not 100%, can you flip it over so I know what it is we are working with?

not sure if this is what you mean bro but this is the front of thermostat

so would i go something like live from mains to 1. live from heater to 2....and neutrals to the N N ports? I really didn't realise i was so clueless with electrics!

20171113_202232.jpg
 

bodyya

Member
thats a super strange thermostat. I would say look up the manual before you light it on fire somehow.
is 1 in and 2 out? with N and N being commons? I dont see any other 24v input anywhere.
that is exactly what i'm worried about doing!! :fire: :|

can't find any manual online and leaflet that came with it has no instructions
 

Lite

Well-Known Member
ok i've looked at it. You have 24v on/off wires from your fan? otherwise you are going to need a contactor to make this work.

this is just a 24v thermostatic switch, this doesnt have anything to do with cutting off your high voltage.
 

bodyya

Member
ok i've looked at it. You have 24v on/off wires from your fan? otherwise you are going to need a contactor to make this work.

this is just a 24v thermostatic switch, this doesnt have anything to do with cutting off your high voltage.

i'm not sure of voltage but the heater i want the thermostat to control is 240watts . reason i bought this thermostat was becuase from what i read in reviews was that it was very basic....and i only want to control 1 tube heater thought it sounded perfect.

obviously not basic enough for me!
 

bodyya

Member
get a volt meter and check for continuity. 20 to 50 bucks at any homedespot
tbh i don't think there is going to be an issue with voltage because the thermostat is apparently really designed to control room temp, so would be turning on and off a central heating system which i'm certain would be higher voltage than the small tube heater i want it to control. i just don't know where to stick the wires so to speak!

anyways thanks for your input guys.i have been running the heater all the time on lights out which has been working ok . just thought i may be able to conserve some electricity with a thermostat. no biggy
 

Uncle Reefer

Well-Known Member
tbh i don't think there is going to be an issue with voltage because the thermostat is apparently really designed to control room temp, so would be turning on and off a central heating system which i'm certain would be higher voltage than the small tube heater i want it to control. i just don't know where to stick the wires so to speak!

anyways thanks for your input guys.i have been running the heater all the time on lights out which has been working ok . just thought i may be able to conserve some electricity with a thermostat. no biggy
THe volt meter is to figure out what goes to what
 

bodyya

Member
THe volt meter is to figure out what goes to what
gotya! tbh the thermostat was only a very cheap one to start with. gonna try and join an electrician forum(lol) see what i can find out there. if no joy will just leave the heater running constantly. it's only pushing temp to about 80f when lights off . so probably not too big a problem
 

bodyya

Member
it is the first think I posted, there ya go problem solved
ok so if i have live/neutral/earth wires coming from plug cable(mains) and live/neutral/earth coming from heater cable ....do you know which wires from each go where in the thermostat terminal?
 

Uncle Reefer

Well-Known Member
From the wall ,live goes to 1 , neutral goes to N , earth doesnt go to the thrmostate.
to the heater 2 goes to the hot wire and you can tie your Neutral wire in with the other N or other Neutral or put it on the other N post. Doesnt matter.
YOur Earth from the wall goes to your earth of the heater
 

bodyya

Member
From the wall ,live goes to 1 , neutral goes to N , earth doesnt go to the thrmostate.
to the heater 2 goes to the hot wire and you can tie your Neutral wire in with the other N or other Neutral or put it on the other N post. Doesnt matter.
YOur Earth from the wall goes to your earth of the heater
thank you very much! apologies for needing it explained as if to a 5 year old....but really don't want to make any mistakes with electrics.not something i'm great with.
 
Top