if it's out of warranty these will work as replacement diodes https://www.ebay.com/itm/1W-3W-5W-Watt-High-Power-LED-SMD-Chip-UV-White-Blue-Deep-Red-RGB-Beads-With-PCB/322537983189?hash=item4b18c30cd5:m:mKlh57YfO2mtRHRwl7SpaCQ the viperspectra 450 uses 5 watt diodes. hope this helpsI have a viparspectra reflector series with 2 bad diodes can anyone tell me the specs and where I can get these
yup I have one pretty sweet light for the money, it will bloom about a 2x3 area fairly well. i run a 600 and a 450 in a 2x4.
That's what I'm aiming for 600 watt with the viper in my 3x3 what yields u looking atyup I have one pretty sweet light for the money, it will bloom about a 2x3 area fairly well. i run a 600 and a 450 in a 2x4.
What's ir ledI sure hope your not looking at the I.R. leds.they look burnt out but aren't. the 450 is a very good veg light as it's high in the blue spectrum I have several vipar's and haven't had an issue with any of them.
Infrared.What's ir led
What about one I posted the vt600If you are gonna buy one and it has to be Viparspectra. Atleast get the par series. Alot better light. It will flower the hell out if some bud.
I'm hoping for close to a 16 0z. which really isn't that good for the cabinet size but I am having serious problems keeping the gurls warm at night .my cabinet gets down to 50 at night even with a space heater in the cabinet. I pulled the 450 out and moved it to the cabinet which is connected to the main flower chamber to get my next round bushing up. I replaced the 450 with a 400 hps and to be honest haven't seen a difference in the last 2 weeks.The positives of the vipar's is the reduced energy use and of course heat. but another thing i like is i can slam the lights down on the canopy as I have very limited distance to bud around 24 inches. and another thing is the frost level way better than if I grew this same strain under the hps I usually run.I will post a few pics if the poster doesn't mind.That's what I'm aiming for 600 watt with the viper in my 3x3 what yields u looking at