Cold$moke's Frost heave

Cold$moke

Cold$moke

Well-Known Member
Just a quick reminder to everyone

This room is still getting figured out.lol not dailed yet.

First run with new light and STRETCHING it at that.

First run with new nutrient lines

Plus these are wanky monster crop plants .

My next runs should blow these guys doors off

And i figure by 2 cycles or so i should have the new nutrients learned pretty well dialed

And after this run ill know how much more light i need if any

Thanks everyone :)
 
M

max420thc

Well-Known Member
This is what it can do if you do it right.
You train and form colas along the terminal stem and allow light and air through the colas.
Plants that do not form colas along the terminal stem will not produce well.
Plants that do( will kill it with production)
The plants need to flow well with no stress through out the cycles( this includes veg cycle)they need to be young and not vegetated for long, you want the cell structure soft on the baby when you put her in with hollow stems, super healthy, mother's need to be fresh and healthy , not old with hard branchs ,
Toped early to get the terminal Branch's going and then into bloom early , unless you have a really large container.
 
0321Marine

0321Marine

Well-Known Member
Amnesia Haze is a 12 weeker. ;)

R.Q.S. - "The only down side with Amnesia Haze is the long flower time required of 12 weeks. Although this is high enough to make most commercial growers run for the hills, true cannabis connoisseurs will find the wait more than worth it."
 
Cold$moke

Cold$moke

Well-Known Member
max420thc said:
This is what it can do if you do it right.
You train and form colas along the terminal stem and allow light and air through the colas.
Plants that do not form colas along the terminal stem will not produce well.
Plants that do( will kill it with production)
The plants need to flow well with no stress through out the cycles( this includes veg cycle)they need to be young and not vegetated for long, you want the cell structure soft on the baby when you put her in with hollow stems, super healthy, mother's need to be fresh and healthy , not old with hard branchs ,
Toped early to get the terminal Branch's going and then into bloom early , unless you have a really large container.
Click to expand...
I have 4 completely untrained clones
That are turning into monsters i was going to throw them in the room somewhere using your method

But i dont know if the strain will be able to be snipped an inch off the mainstem .

Can i just snip after the first node in this case?
 
Cold$moke

Cold$moke

Well-Known Member
0321Marine said:
Amnesia Haze is a 12 weeker. ;)

R.Q.S. - "The only down side with Amnesia Haze is the long flower time required of 12 weeks. Although this is high enough to make most commercial growers run for the hills, true cannabis connoisseurs will find the wait more than worth it."
Click to expand...
Could be true but I learned to take breeder descriptions with a grain

And to be honest i never even read one for it :)
It was just a freebie

Its ok if it takes 12 as long as it doesnt go for 16-18 weeks like some other hazes i have run
I planned on at least 10 weeks 2 more wont kill nothin
 
Cold$moke

Cold$moke

Well-Known Member
max420thc said:
This is what it can do if you do it right.
You train and form colas along the terminal stem and allow light and air through the colas.
Plants that do not form colas along the terminal stem will not produce well.
Plants that do( will kill it with production)
The plants need to flow well with no stress through out the cycles( this includes veg cycle)they need to be young and not vegetated for long, you want the cell structure soft on the baby when you put her in with hollow stems, super healthy, mother's need to be fresh and healthy , not old with hard branchs ,
Toped early to get the terminal Branch's going and then into bloom early , unless you have a really large container.
Click to expand...
Remember max im not trying to max production if i where i would lace my room out with lights and AC. And blow it up.


What im Trying to do is see how much weed i can grow with minimal light :)

Im sure if i laced my room out i could get close to what you show in your pics :)


Now that being said im willing to learn new tricksto become a better grower.

And am willing to TRY your method but im not changing my room this run for it.

I will go try and take some pics of the little clones.
And i would like you if possible to overlay how to train them.
Im visual you can explain shit to me all day
But i learn instanly after seeing :)

Ill get you a pic of them soon they are completely untrianed with all branches
 
M

max420thc

Well-Known Member
Cold$moke said:
I have 4 completely untrained clones
That are turning into monsters i was going to throw them in the room somewhere using your method

But i dont know if the strain will be able to be snipped an inch off the mainstem .

Can i just snip after the first node in this case?
Click to expand...
You want to wait until there are three , then start snipping .this is to train for multiple tops, your side branch you could still leave the node on nearest to the terminal stem.
It is always good to let air and light through.the closer you can get it to the terminal the better it will be.
You want to train ( as many plants under a 4x4 area ) that will fit, depending size of the colas around 30 give or take.
If you are using 6 6 gallon containers you would train to 5 colas each plant when you put them into bloom,
Any more then that , or 12 two gallon containers would have two and three colas trained,
By the way if a plant only had one node and you cut it off I am pretty sure it would die.
When the plants are first set into bloom all the same strain under a lamp you cut all the tops off the plants level.
The plants being the same strain will have the same stretch , this is what keeps the canopy level as it grows.
 
Last edited:
Cold$moke

Cold$moke

Well-Known Member
max420thc said:
You want to wait until there are three , then start snipping .
You want to train ( as many plants under a 4x4 area ) that will fit, depending size of the colas around 30 give or take.
If you are using 6 6 gallon containers you would train to 5 colas each plant when you put them into bloom,
Any more then that , or 12 two gallon containers would have two and three colas trained,
By the way if a plant only had one node and you cut it off I am pretty sure it would die.
When the plants are first set into bloom all the same strain under a lamp you cut all the tops off the plants level.
The plants being the same strain will have the same stretch , this is what keeps the canopy level as it grows.
Click to expand...
Ill go get a picture

Can you do a drawing over my picture showing exactly how you would cut it ?

Basically these 4 clones where in a different experiment that i have my results for .

But now they are crowding my veg room

Its 4 clones in a 10 gal i beleive tote

Ill hack them however you want
But their stems are already woody ? Will this mess stuff up .

Or should i wait to try your method after i get fresh clones?
 
9

907guy

Well-Known Member
Cold$moke said:
Just a quick reminder to everyone

This room is still getting figured out.lol not dailed yet.

First run with new light and STRETCHING it at that.

First run with new nutrient lines

Plus these are wanky monster crop plants .

My next runs should blow these guys doors off

And i figure by 2 cycles or so i should have the new nutrients learned pretty well dialed

And after this run ill know how much more light i need if any

Thanks everyone :)
Click to expand...
Looking pretty damn good to me man!
 
Cold$moke

Cold$moke

Well-Known Member
Thanks bud much appreciated: )

i just dont want peeps to think that i think its on point cause it aint lol

I mean, the clones that i took off these girls have almost caught up so i know they are slow growing

I KNOW the next crop should rock at least i hope :)
 
You must log in or register to reply here.
Top