Fluffyhead22
Well-Known Member
So I just built a 5 gal clone bucket. I have it set to 30min on 30 off. It's been 7 days and no sign of roots. Any tips been keeping water 70-78. Maybe it just takes longer
Just built cloner 7 days no roots
- Thread starter Fluffyhead22
- Start date
Beachwalker
Well-Known Member
What does 30 minutes on and off mean?
Fluffyhead22
Well-Known Member
The pump is on for 30 of for 30
Fluffyhead22
Well-Known Member
It sprays for 30mins then it's off for 30
Beachwalker
Well-Known Member
Oh I see (I was thinking bubbler), some clones take twice that long to root, what strain is it?
BleedsGreen
Well-Known Member
Give it time, some strains take forever others will show root in a week. good luck! my timer is set for 4 minutes off one minute on and
I pretty much get 100% eventually
I pretty much get 100% eventually
BobBitchen
Well-Known Member
Pump 24/7
no off time
Patience
no off time
Patience
Fluffyhead22
Well-Known Member
It's supernovas purple punch. She a beatuty. She's a super bush. If I can't get her to close I'll reveg her. Just a little worried
Fluffyhead22
Well-Known Member
This is a spraye
That's what I've seen recommend everywhere. What's your recommendation
Fluffyhead22
Well-Known Member
Attachments
BleedsGreen
Well-Known Member
I think @Cold$moke might be referring to the 30 minutes off seems long to me.
If the stems are soaked in a minute, running another 29 minutes of spray wont make a difference. 30 minutes off is too long, 5 would be better and 10 at the most.
Cold$moke
Well-Known Member
Ive been an aero cloner for over 10 years
Bubble works too but i dont prefer it
Your spray time is whats fucking with you
But its hard to run a pump continuously without over heating the water
But continuous would be better then 30 on 30 off
At the very least try to buy a 15min on off timer
Or even better get a short cycle.timer
And run it 1 min on 5 to 10 off
Basically you wana keep them as dry as possible without wilting if that makes sense
Set your spray height to where they just touch the spray
Use regular tap water no ph, no nutes..
Aero cloning is superior once you get the hang of it (bubblers work too) even better if you ha e higher temps cause generally the airpump wont heat the water like a submersible pump will
Hope it helps
Bubble works too but i dont prefer it
Your spray time is whats fucking with you
But its hard to run a pump continuously without over heating the water
But continuous would be better then 30 on 30 off
At the very least try to buy a 15min on off timer
Or even better get a short cycle.timer
And run it 1 min on 5 to 10 off
Basically you wana keep them as dry as possible without wilting if that makes sense
Set your spray height to where they just touch the spray
Use regular tap water no ph, no nutes..
Aero cloning is superior once you get the hang of it
(bubblers work too) even better if you ha e higher temps cause generally the airpump wont heat the water like a submersible pump will Hope it helps
Fluffyhead22
Well-Known Member
Wow thanks for the feedback back I have a 15 min intervul timer. So should I go 15mim on 45 off. Or do 45 on 15 off. Or just keep it on the entire time. My water temp hasn't been hot at allIve been an aero cloner for over 10 years
Bubble works too but i dont prefer it
Your spray time is whats fucking with you
But its hard to run a pump continuously without over heating the water
But continuous would be better then 30 on 30 off
At the very least try to buy a 15min on off timer
Or even better get a short cycle.timer
And run it 1 min on 5 to 10 off
Basically you wana keep them as dry as possible without wilting if that makes sense
Set your spray height to where they just touch the spray
Use regular tap water no ph, no nutes..
Aero cloning is superior once you get the hang of it
Hope it helps
