SB85
Well-Known Member
it his possibly what you were referring to?
Growmau5 just dropped a little update
https://www.instagram.com/p/BfwTs9klZKA/?taken-by=growmau5
it his possibly what you were referring to?
Don't really see what makes this a better choice than the competition?
Hello!!Hi guys ive been looking at these quantum boards and i was thinking to have 8 QB 132's (4 @ 2700k, 4 @ 4000k) in my 8x4 tent
so i would need
2 x HLG-240H-C1750A
https://www.digikey.com/product-detail/en/mean-well-usa-inc/HLG-240H-C1750A/1866-2457-ND/7704013?utm_campaign=buynow&utm_medium=aggregator&WT.z_cid=ref_findchips_standard&utm_source=findchips
2 power cords like this one
https://www.amazon.com/dp/B079ZRXKYB/?coliid=I13HW2JWBCG9XA&colid=FN9KHXHGUS1V&psc=0&ref_=lv_ov_lig_dp_it
and 2 waterproof connectors
https://www.amazon.com/dp/B06XPTV45F/?coliid=IT3ZNL8Q7DYHI&colid=FN9KHXHGUS1V&psc=1&ref_=lv_ov_lig_dp_it
Is there anything else i'm missing, aside from hangers ? also what is the difference between the driver that ends in 1750A and 1750B (only difference i can see in the specs is that B's are IP67 rating)
one more thing - what size wire do i wire the boards in series with? 22 gauge if i am not mistaken? (pls correct me if im wrong)
PS: if anyone has this current set up, if you could share your experience/pictures/par readings with these QBs - thx guys
whats the boards K temp ex 3000k, 3500k, 5000k the lower #K are more yellow the higher # more whiteAny idea why the qb288 is more yellow than the qb120’s (I am pushing 75w to each via their own driver)
What drivers are you using?
Nice dude. Hell of a light.
Different color temp.Any idea why the qb288 is more yellow than the qb120’s (I am pushing 75w to each via their own driver)
Beautiful work, man. Love seeing these clean setups.
Different color temp.
I would have gotten all 3000k/3500k personally. Looks like you got 2x in 4000k or even 5000k.
I am running lrs-350-36 to run sets of 4 in parrelllel. Each one has a potentiometer and multimeter display. The single is powered by a lrs 75 36. That controls the center board so I can dim it as needed (bright spot likely otherwise in the center).What drivers are you using?
Thanks a lot I appreciate itBeautiful work, man. Love seeing these clean setups.
Like your lighting man but I'm loving your Avatar, finally Skeletor got the better of He-Man.I made these this morning for the veg setup. I like to leave the custom touch that’s not easily reproduced.
View attachment 4134277
I have a question about those LCD meters. Do you run what's coming in from the AC or the DC side. Say I had 2 drivers I want to be read from 1 LCD. Would I just take the + and - from each driver output and wire them into the appropriate LCD wires? I have been looking into ordering one of those.My flower set up shown above is all 2700k. My veg is all 4000k. I have a variety in packaging so I can swap them out and interchange them as I see a need.
I am running lrs-350-36 to run sets of 4 in parrelllel. Each one has a potentiometer and multimeter display. The single is powered by a lrs 75 36. That controls the center board so I can dim it as needed (bright spot likely otherwise in the center).
Thanks a lot I appreciate it