Chunky Stool
Well-Known Member
Someone got jelly pie for $34 -- nice!
It was tempting but I've already got one...
It was tempting but I've already got one...
One is never enoughSomeone got jelly pie for $34 -- nice!
It was tempting but I've already got one...
Great info my friend! Now I'm beginning to see the picture. Pretty simple, I'm thinking I can do this. I know I can. Thank you #LrnLvGrw. First time I'm feeling this is definitely doable. Thank you for taking the time to share.Use your hoods. Take the bulb out. Get 1/8 inch sheet of aluminum cut to the dimensions of the glass(this will go in place of the glass) Put 3 qb288 on each plate. Driver goes on top of the plate (in the hood). Use a meanwell b type driver so you can run a potentiometer to the outside of the hood so you can dim. Air cool as your doing. Higher up front cost using 3 qb's but you can run them softer and have a more equal light distribution.
That's a great idea. I bet it runs pretty cool too by cooling the driver inside the light plus cools the back side of the aluminum at the same time.Use your hoods. Take the bulb out. Get 1/8 inch sheet of aluminum cut to the dimensions of the glass(this will go in place of the glass) Put 3 qb288 on each plate. Driver goes on top of the plate (in the hood). Use a meanwell b type driver so you can run a potentiometer to the outside of the hood so you can dim. Air cool as your doing. Higher up front cost using 3 qb's but you can run them softer and have a more equal light distribution.
I would get some thermal tape to put on the back if the qb. That way if you want to upgrade or drive them harder it will help cool them. It may not be needed. But it's cheap, you can get from Amazon for less than 20 bucks. It will at the very least make your leds last longer by helping with cooling.Great info my friend! Now I'm beginning to see the picture. Pretty simple, I'm thinking I can do this. I know I can. Thank you #LrnLvGrw. First time I'm feeling this is definitely doable. Thank you for taking the time to share.
I'm beginning to lean that way. I'm no electrician, but I can wire a house. Have done it, I just followed the Home Depot beginner manual. #Vertnugs, does the 600H kit come with assembly directions. Would you know? Or is it best to assemble piece by piece. I'm willing to try, but it has to be obtainable. I can follow directions pretty good, if the directions are there. Is there a website dedicated to DIY? I appreciate your input and interest. Thanks again.
How far along are they?Well out of 5 pebble pushers and 5 sundae stallion only have 1 pebble pusher and 2 sundae stallions left. These are probably the most manliest, sickly lookn seedlings I have ever run. And no it's not my soil, temp, environment, or any if the above. Bc all the soil was mixed together. And the other 9 seedlings are fine. Growing great. I mean atleast the bunk S1's grew with some.tyoe of vigor.
Yep and with the rollitup discount. Already have 2 packs but couldnt pass it upSomeone got jelly pie for $34 -- nice!
It was tempting but I've already got one...
my qb600h run FAR cooler than my air-cooled 600w hps did.
Hmm well that might answer me. Popped whole pack of sundae stallion and they def dont have the same vigor associated with other gp seeds ive done. Only 2 weeks after germination so hopefully tgey pick up. Have 25 other seedlings going including cackelberry anf they are all blowing the doors off ss.Well out of 5 pebble pushers and 5 sundae stallion only have 1 pebble pusher and 2 sundae stallions left. These are probably the most manliest, sickly lookn seedlings I have ever run. And no it's not my soil, temp, environment, or any if the above. Bc all the soil was mixed together. And the other 9 seedlings are fine. Growing great. I mean atleast the bunk S1's grew with some.tyoe of vigor.
I've never even used the riu discount, how much is the discount anyway?Yep and with the rollitup discount. Already have 2 packs but couldnt pass it up
3 packs minimum or bust.One is never enough
What kind of ventilation you got going on in your room? Get rid of all the 90 degree angles in your ducting for better air flow. Maybe get a bigger duct fan. Do you have ventilation separate from your lights ventilation? Depending on the time of year and where you live you can suck cool fresh filtered air into without the use of Ac. There are lots we could come up with for you. Maybe someone has some others?Hey guys! I hope I'm not out of line with this. But this is my most favorite thread. And I certainly trust and value each one of you guys opinion. (Some a little more than others. Lol) So please help an old, "old school" guy out if you will. So here goes. I use two Blockbuster 600 watt (Hortilux bulbs) hoods over an Aeroflow 60 site, with two light movers going from side to side. My total footprint is about 41/2 X 61/2. I'm satisfied with my grow, as it is. But I would like to get away from the heat being produced, and hopefully up the quality of my grow somewhat. (Who doesn't, right!) And cut back on the AC usage. Which of these would you suggest? And how many would I need to replace my HPS bulbs. I only flower, no real veg time in my setup. The
(1) Specification:
LEDs: CREE XLAMP CXB3590
Cooling: Passive Heatsink (No fan)
3500K Warm White
CRI: 80
umol/ watt 2.1
Forward Foltage: 36V
Max Current Drive: 3600ma
Actual Power Draw: 54 watts
COB Max Power: 132 Watts
Net weight: 1.5KG.
(2) Or the HLG- 600H with new V2 Quantum Boards.
(3) Or the Fluence SpydrX or SpyderX plus.
This may not be the place to ask. But I feel as if I somewhat know all you guys here. This is a big step for me. I've only used HID's forever, nothing else. But I don't want to stay behind, if getting up to date is the thing. Thanks for any help.
What do yours look like? Mine are two weeks old as well.Hmm well that might answer me. Popped whole pack of sundae stallion and they def dont have the same vigor associated with other gp seeds ive done. Only 2 weeks after germination so hopefully tgey pick up. Have 25 other seedlings going including cackelberry anf they are all blowing the doors off ss.
They were 4 days old. And they died during night cycle. Everything was popped at the same time. All the soil is from the same bag, and everything. In the same tent, all done the same. They all popped good and quick and had good tails. Came up through the soil quick. But once they broke ground they shit out. Everything else is still truckn along nicely. But I won't be popping anymore of them. On to something else. I don't have time to grow em for a few days and replace them. Guess that's what I get for counting on testers.How far along are they?
Yeah possibly just some unlucky seeds, hard telling this early.They were 4 days old. And they died during night cycle. Everything was popped at the same time. All the soil is from the same bag, and everything. In the same tent, all done the same. They all popped good and quick and had good tails. Came up through the soil quick. But once they broke ground they shit out. Everything else is still truckn along nicely. But I won't be popping anymore of them. On to something else. I don't have time to grow em for a few days and replace them. Guess that's what I get for counting on testers.
They don't have bags on them. And I've done the same thing for the last 10 years. Everything else is growing fine. Including other GPS strains. What's the difference, between a bag and a plastic clear container as in a dome.Maybe you should try taking the bag off