My First Grow. Bag Seed

SaHt420

Well-Known Member
I mean It will work but the reviews are sketchy. Expect to buy a replacement bulb in 6 months. Looks like a 5-6k Kelvin light too. Optimal for flower would be 3500 and under.
Yea truth be told I will prob and up just getting a 300w viparspectra at least they get good reviews
Do you know of any grow light for around 75 on Amazon or some other online store not in mj safe area so no hydro stores or anything like that and nothing on cl
 

jdVICK

Member
Yea truth be told I will prob and up just getting a 300w viparspectra at least they get good reviews
Do you know of any grow light for around 75 on Amazon or some other online store not in mj safe area so no hydro stores or anything like that and nothing on cl
I currently have a 450W Viparspectra lol been working great for me man and the same here no hydro store ordered mine off Amazon for $140 with 1 day shipping option20180608_135548.jpg 20180608_135554.jpg
 

Cx2H

Well-Known Member
Yea truth be told I will prob and up just getting a 300w viparspectra at least they get good reviews
Do you know of any grow light for around 75 on Amazon or some other online store not in mj safe area so no hydro stores or anything like that and nothing on cl
For 49$ and easy on the budget, I'd try this one. SYGAVLED 300W LED Grow Light - High Yield - Full Spectrum Indoor Hydroponic Plants Veg Bloom https://www.amazon.com/dp/B01JIIQRPQ/ref=cm_sw_r_cp_apa_i_BBEiBbJJQYVG3

Proven winner, I'd go vispar 300 for 79$, really broke Id go 5$ ea 120v driverless LED chips but you need heat sinks, aluminum angle bar wire etc.
 

SaHt420

Well-Known Member
For 49$ and easy on the budget, I'd try this one. SYGAVLED 300W LED Grow Light - High Yield - Full Spectrum Indoor Hydroponic Plants Veg Bloom https://www.amazon.com/dp/B01JIIQRPQ/ref=cm_sw_r_cp_apa_i_BBEiBbJJQYVG3

Proven winner, I'd go vispar 300 for 79$, really broke Id go 5$ ea 120v driverless LED chips but you need heat sinks, aluminum angle bar wire etc.
Yea good reviews and quite a bit cheaper then my other choice I think I'll try it out when I get the extra cash
 

Cx2H

Well-Known Member
Yea good reviews and quite a bit cheaper then my other choice I think I'll try it out when I get the extra cash
Just remember Amazon prices change daily sometimes hourly, first part of the week it's cheaper, close to weekends cost more.

Was 54$ with a 10% off coupon which made it 49$, now no coupon and 54$ flat.
 

SaHt420

Well-Known Member
Just remember Amazon prices change daily sometimes hourly, first part of the week it's cheaper, close to weekends cost more.

Was 54$ with a 10% off coupon which made it 49$, now no coupon and 54$ flat.
Yea I'll watch it and when price seem good I'll go for it but for now the babies are under cfls and growing so no need for new light right now
I'm just a bit scared cause one of them is a month old in 2 days and its the size of a 2 week old seedling.
Is that from all the shock?
 

Cx2H

Well-Known Member
Yea I'll watch it and when price seem good I'll go for it but for now the babies are under cfls and growing so no need for new light right now
I'm just a bit scared cause one of them is a month old in 2 days and its the size of a 2 week old seedling.
Is that from all the shock?
I would think so. Could be genetics. Could be anything or nothing. :-)
 

SaHt420

Well-Known Member
Alright well its on its 3rd set of leaves so its growing prolly just working on its root for transplant into bigger pot old but its still kicking so I'll let it grow
I would think so. Could be genetics. Could be anything or nothing. :-)
 

SaHt420

Well-Known Member
I am going to germ another bean in case this one doesn't make it looking sad I don't water often and i don't know what is wrong with her growing but very slowly but my other baby is doin alright for a month old
 

Attachments

Cx2H

Well-Known Member
I am going to germ another bean in case this one doesn't make it looking sad I don't water often and i don't know what is wrong with her growing but very slowly but my other baby is doin alright for a month old
You are doing the exact same thing to both and one is going south?

If so then could be genetics.

Mix up some soil and Fert in another couple of cups and keep it moist and let it cook while you wait for the new beans to pop. Takes 2-4 weeks for the soil to prep anyway.
 

SaHt420

Well-Known Member
You are doing the exact same thing to both and one is going south?

If so then could be genetics.

Mix up some soil and Fert in another couple of cups and keep it moist and let it cook while you wait for the new beans to pop. Takes 2-4 weeks for the soil to prep anyway.
Yea
I got some worm casting and organic soil mixed them up in a small pot don't have any solos right now
 

Cx2H

Well-Known Member
Yea
I got some worm casting and organic soil mixed them up in a small pot don't have any solos right now
Ok that's even better. Thought you were working with solo only. ;-) (god my veggies garden is being over run by white butterflies)
 

SaHt420

Well-Known Member
Ok that's even better. Thought you were working with solo only. ;-) (god my veggies garden is being over run by white butterflies)
Lol
How long does it take for worm casting to break down or is it ready to use by the plant and btw the soil said it has like .05 nitrogen and that it has fungi in it I am assuming that is the micro herd
 

Cx2H

Well-Known Member
Lol
How long does it take for worm casting to break down or is it ready to use by the plant and btw the soil said it has like .05 nitrogen and that it has fungi in it I am assuming that is the micro herd
Worm castings are ready to go to work in a couple of days if they are fresh. The casting are rich with microbiology. Yes the soil has some microbiology in it which is good.
 

SaHt420

Well-Known Member
Worm castings are ready to go to work in a couple of days if they are fresh. The casting are rich with microbiology. Yes the soil has some microbiology in it which is good.
Alright well I'm not gonna transplant this one until it really needs it and I am gonna be real cautious about watering lesson learned haha
 

SaHt420

Well-Known Member
So I switched my setup again wtf right

So it's 15"x17"x3' down sized but itll work no light leak except were fans are but their are no lights on that side of the room when dark cycle is on
It has 4" intake 6in exhaust I'm it's a lot for this small of an area but it stays cool so it's all good in 70s
Light is 2' above biggest plant top

Lightis 2 12w 910lmn 4000k led's
1529623870707962931374.jpg 1529623901511523287893.jpg
The intake bottom exhaust is top now I have the exhaust at an angle because if it is sitting in their straight it falls out now the way it is their are gaps around the fan itself and suggestions on how I could get it to sit straight I tried tape it held for a day then when I checked temps opening the doors it fell1529623958355302776890.jpg
Yea the bar across is a pain but it's either that or have only 1' in height so I'll make it work lol1529624051150851260379.jpg
If you can't tell I went the way of Epsoma this is the soil I'll be using on my new plant when the beans sprout
15296241897111761721150.jpg These are the 2 lights see how the fan is tilted

I plan on starting the new babies under cfls or is it ok to start them under these
I need another fan to push air around in their but other than that I think it'll be much easier to control this box then my other one
Btw my 2x2 ended up having bad light leaks cause doors warped after I screwed it on
Sorry for long post
 

Cx2H

Well-Known Member
So I switched my setup again wtf right

So it's 15"x17"x3' down sized but itll work no light leak except were fans are but their are no lights on that side of the room when dark cycle is on
It has 4" intake 6in exhaust I'm it's a lot for this small of an area but it stays cool so it's all good in 70s
Light is 2' above biggest plant top

Lightis 2 12w 910lmn 4000k led's
View attachment 4154213 View attachment 4154214
The intake bottom exhaust is top now I have the exhaust at an angle because if it is sitting in their straight it falls out now the way it is their are gaps around the fan itself and suggestions on how I could get it to sit straight I tried tape it held for a day then when I checked temps opening the doors it fellView attachment 4154215
Yea the bar across is a pain but it's either that or have only 1' in height so I'll make it work lolView attachment 4154218
If you can't tell I went the way of Epsoma this is the soil I'll be using on my new plant when the beans sprout
View attachment 4154219 These are the 2 lights see how the fan is tilted

I plan on starting the new babies under cfls or is it ok to start them under these
I need another fan to push air around in their but other than that I think it'll be much easier to control this box then my other one
Btw my 2x2 ended up having bad light leaks cause doors warped after I screwed it on
Sorry for long post
Real crafty. :-)
 
Top