From DEs to LEDs

420Barista

Well-Known Member
eh i was hoping to halve my wattage yet remain the same yield and quality. if im only going to see a 10-20% electricity savings versus my current DE's i think i'll hold out for another year or two to upgrade.
I was a holdout when cobs hit and when I was finally ready Quantum Boards were here and I jumped on them. picked up 2 260watt kits which equal a hlg 600 and 2 135watt kits for veg this was b4 the smaller boards were out.
 

wietefras

Well-Known Member
You'd be better of getting strips instead of boards. Strips give much better uniformity, which means you can hang the light a lot closer to the plants (say 8" instead of 18") and thus you lose a lot less light on the wall. Depending on the walls that can give 20% more light on the plants with strips from the same wattage (and less cost for the strips too).
 

skoomd

Well-Known Member
You'd be better of getting strips instead of boards. Strips give much better uniformity, which means you can hang the light a lot closer to the plants (say 8" instead of 18") and thus you lose a lot less light on the wall. Depending on the walls that can give 20% more light on the plants with strips from the same wattage (and less cost for the strips too).
And better canopy penetration if there's enough of them and they're spread out nicely. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4559655/

inb4 slingingturds says otherwise
 

booms111

Well-Known Member
What is the diff between the qb120 and the qb228? Can i see some dry bud shots with a lighter for scale?
The amount of diodes which effect how many watts each board can run which effects having to run a heatsink or not. Qb120 has 120 diodes and doesnt need a heatsink but runs at 65-70w and a qb288 has 288 diodes and can run up to 150w+ but needs heatsink
 
Top