IRONMAN4200
Active Member
wut are the sickest homemade bongs youve ever made. i once stole one of those glass 3 foot graduated cylinder from my chemistry call. it was a hastle to make but it ripped like a champ.
Ill Homemade Bongs
- Thread starter IRONMAN4200
- Start date
SEF
Well-Known Member
Dude I bet, how'd you make the carb? Glass drillbit?
NoviceGrower
Well-Known Member
he said it was a bong not a bowl, no carb in a bong man
mistaphuck
Well-Known Member
yeah its called a slide
KaliKitsune
Well-Known Member
I used a teardrop open end beaker, fitted a valve to it at the bottom for waterflow instead of the gasflow it was designed for, found a glass downstem and a bowl to fit, and made a sick ass gravity bong. I don't even have to lift jack, just fill with water, insert bowl, turn valve and light. Water drains into a pyrex measuring cup, smoke gets filtered thru the water like a good bong should do.
BlazedAndConfused
Well-Known Member
Lol i made a lung, and more recently a vaporizer out of a lightbulb, a bottle cap, some tubing and a heat gun. I also rigged it so its hooked up to my bong and i can just turn on the gun and toke =D
Multan
Well-Known Member
i've made a really ghetto bong...
in desperate times...i've taken a 500mL water bottle, cut a small hole into it....stick a straw through the hole (thicker plastic straws work better---and if somehow you can get a metal straw, even better!). Then i take a pappermate mechanical pencil. The fancy ones...i think they are called PhD's. Unscrew the metal tip, and attach it to the end of the straw. Might require some tape and craftiness. Because the pencil tip is made of thick metal you can get a few good bowl rips before the straw/tape starts to melt. lol.
then
Fill up the bottle with water...and hit the bottle from where you'd normally drink it from.
Alternative construction....you could do the same thing using aluminum foil.
wrap the foil around a pen to form a thick cylinder, place the pen tip snugly into the foil and rip your lungs away...
even more desperate...you could craft the bowl piece and straw out of foil.
the end.
in desperate times...i've taken a 500mL water bottle, cut a small hole into it....stick a straw through the hole (thicker plastic straws work better---and if somehow you can get a metal straw, even better!). Then i take a pappermate mechanical pencil. The fancy ones...i think they are called PhD's. Unscrew the metal tip, and attach it to the end of the straw. Might require some tape and craftiness. Because the pencil tip is made of thick metal you can get a few good bowl rips before the straw/tape starts to melt. lol.
then
Fill up the bottle with water...and hit the bottle from where you'd normally drink it from.
Alternative construction....you could do the same thing using aluminum foil.
wrap the foil around a pen to form a thick cylinder, place the pen tip snugly into the foil and rip your lungs away...
even more desperate...you could craft the bowl piece and straw out of foil.
the end.
IRONMAN4200
Active Member
ya i used a glass drillbit. it took a long time to drill because i had to make sure not to shatter the peice, it took like a good 10-15 min cause the glass was so thick
notserious
Well-Known Member
i once made a double perc out of a 32 oz short gatorade bottle, a tall smart water bottle, some computer power cord wire, and gorilla glue lol
it was amazing, hit so fat and strong, yet so smooothe.
it was amazing, hit so fat and strong, yet so smooothe.
somerandomguy
Active Member
lets see over the summer a friend and I bought 2 vases from a flower shop for $4 each. I did most of the work, i slowly drilled the hole for the slide and clear hole which took forever. I used a pen for the slide and this random metal piece for the bowl. it had a diffuser and everything, i was very proud of myself. it took about 3 hours to make (drilling was soo time consuming) and it was such thin glass it broke after the 2 use ha.
smokeordie
Active Member
made and 2 person hookah with a 2 liter bottle and mcdonald straws and sum electrical tape.
1)i put a hole in the top of the soda cap and fitted and metal bowl peice i had.
2)then i taped a straw frmo the bottom of the cap and made it go down about 3/4 of the way down.
3)i made a diffuser outta straws... it was actually easy. i taped a smaller straw to the bottom of the first straw, then cut of the end of a different straw and closed one end of it up with a lighter by melting it together. then put a bunch of holes in it with a needle and slid it over the smaller straw that i put on earlier....
4)i burned 2 holes kinda at the top of the bottle with my friends cig. the electrical taped around the end of a new straw to make it fit air tight into the hole. and did the same with another straw for the other side.
5)light up and u and another friend can get ripped from a homeade peice at the same time...
6)and u can clear out the smoke by unscrewing the cap..
tell me wut u think.
XD
1)i put a hole in the top of the soda cap and fitted and metal bowl peice i had.
2)then i taped a straw frmo the bottom of the cap and made it go down about 3/4 of the way down.
3)i made a diffuser outta straws... it was actually easy. i taped a smaller straw to the bottom of the first straw, then cut of the end of a different straw and closed one end of it up with a lighter by melting it together. then put a bunch of holes in it with a needle and slid it over the smaller straw that i put on earlier....
4)i burned 2 holes kinda at the top of the bottle with my friends cig. the electrical taped around the end of a new straw to make it fit air tight into the hole. and did the same with another straw for the other side.
5)light up and u and another friend can get ripped from a homeade peice at the same time...
6)and u can clear out the smoke by unscrewing the cap..
tell me wut u think.
XD
IRONMAN4200
Active Member
thats sounds sick but it must have burnt the bud mad quick
smokeordie
Active Member
ummm.....yea lil bit, but it killed, and got 2 people ripped....
u should try it out sumtime....
u should try it out sumtime....
FLOWER PIMP
Well-Known Member
a friend and i took 2 3-liter plastic purple soda bottles and connected them with hoses (like dual bong action) and made bowl type fixture for the one and hooked a hose to the other bottle.
it was wild, we were young. it took some playing around with the liquid levels in both bottles but in the end, it wasn't too hard to pull..
we called it the purple modulator.
it was wild, we were young. it took some playing around with the liquid levels in both bottles but in the end, it wasn't too hard to pull..
we called it the purple modulator.