Airwalker16
Well-Known Member
Well I'm pretty sure I remember Growmau5 saying he used Nichia diodes for his logic pucks. Must be Osram then?Nichia doesn't sell 660nm LEDs, only 630's
Well I'm pretty sure I remember Growmau5 saying he used Nichia diodes for his logic pucks. Must be Osram then?Nichia doesn't sell 660nm LEDs, only 630's
you again, spreading false infos. as usual. just stop it.Well I'm pretty sure I remember Growmau5 saying he used Nichia diodes for his logic pucks. Must be Osram then?
Stop being such a fuckin Nancy dude. I said it must not be. You're like out to get me or some shit. "Just stop it."you again, spreading false infos. as usual. just stop it.
Oh, you mean those new 92mm x 70mm boardsHe's talking about the Elite96 boards from HLG, not ChilLed Logic Pucks.
Around 60 total watts or 30 per board.So if i were to run two of these in series on hlg 320h c2800, how many watts of power are going to the 660 and the 630?
Haha Jesus that's alot of ppfd is that the mq500 sensor?Quick 1st pic:
View attachment 4221022
Quick first PPFD 18” below lights:
View attachment 4221023
Lol
That's pretty impressive. Can't wait for full mapYep & yep.
Here’s rough & dirty @ 18”:
Two 96s:
View attachment 4221034
One 96:
View attachment 4221036
All on individual hlg-240h-54A, no adjustments.
Full mapping coming on single, double, triple —> octo, w & w/o far red & spectrums...will take some time, tho...
mapping all in a 4x4?Full mapping coming on single, double, triple —> octo, w & w/o far red & spectrums...will take some time, tho...
Im doing the same as soon as mine turn up lol.Yep & yep.
Here’s rough & dirty @ 18”:
Two 96s:
View attachment 4221034
One 96:
View attachment 4221036
All on individual hlg-240h-54A, no adjustments.
Full mapping coming on single, double, triple —> octo, w & w/o far red & spectrums...will take some time, tho...
I am doing this between job and family needs, so you may get done before me. Look forward to seeing your results. How many 96s are you doing?Im doing the same as soon as mine turn up lol.
Tip for you. Black out the floor and make sure the meter is level or the numbers are tainted.