Driver Help

[Krytend]

The cheap little plactic knob and 2 pins broke off of my lrs-150-24 meanwell driver. If i move around one of the broke pins i can get the light to turn on but not stay i on it just blinks. Any idea how to fix it? I don't care about dimming i just want it to stay on at 100% .

 

[Krytend]

Pic

 

[Airwalker16]

If whatever you broke off is broken at a joint that is metal, just solder it back on.

 

[Airwalker16]

And if you can't solder underneath it or some problem arises, there's no harm is running a short wire between the connection points.

 

[Krytend]

And if you can't solder underneath it or some problem arises, there's no harm is running a short wire between the connection points.

So if i bridge the connection point it will bypass the dimmer? I total broke of the plastic nob doubt i can reattach it.

 

[Krytend]

I'm sure i could solider a 18g wire betwen the 2 point's underneath.

Looks like there's 3 soilder points to the dimmer?

 

[Airwalker16]

I'm saying attach the knob back how it was, man.

 

[Krytend]

I'm saying attach the knob back how it was, man.

I can't

 

[JavaCo]

Get you a new one for less then a 20 spot,unless someone knows the OHMs of the broken pot on it that's going to be your best option. https://www.amazon.com/LRS-150-24-Switching-Supply-Single-Output/dp/B018RE4CWW/ref=pd_lpo_sbs_23_t_0?_encoding=UTF8&psc=1&refRID=KWQZRYHYZQRMVDXEZ607

 

[Krytend]

Get you a new one for less then a 20 spot,unless someone knows the OHMs of the broken pot on it that's going to be your best option. https://www.amazon.com/LRS-150-24-Switching-Supply-Single-Output/dp/B018RE4CWW/ref=pd_lpo_sbs_23_t_0?_encoding=UTF8&psc=1&refRID=KWQZRYHYZQRMVDXEZ607

Yeah i figured that was the case. I just didn't want my clones to flower while i wait for the driver to come. I don't have another veg light