Psilocybe Cubensis most common bulk Tek?

[nurrgle]

I would be interested in seeing the pics too.

This is tek I learned years ago from a forum post. I don’t remember the author but he has blesssd me with many many successful runs and I thank him for the love he has helped me send out to the world.

I have used this 100’s of times. If my field capacity is correct and all my inputs were good I have never had an issue with my sub in Mono’s.

As usual I was a little out of it and misspoke. I can do 70-80 per pasturizer I have two so 140-160 lbs. I use turkey bags and weigh each to around 10 lbs of FIELD CAPACITY sub.

I ran one pasteurizer with 60 lbs in it today. I am in the Mountain West so I had to wrap the tub in a few towels to help hold temp in my garage. Normally I don’t have to do that.

I am going to assume you know what all the prep is and what you are looking at.
Tubs I use




Wagner wall paper steamer I use.



How I fit the hose to the HEAT RESISTANT PVC T I built for the inside. I also added some small holes to evenenly dispurse the steam.



Pic of the inside with the pvc T. I used some bricks and a cheap wire shelf from Lowe’s to make a shelf and make some space for the pvc.

Bags are weighed, tied, and loaded into the tup. I have a meat thermometer in the lid of the tup for the inside temp and I stick a meat thermometer with a probe into the center of one of the bags so I can monitor inside temps.



Bags loaded and spacers used to make room.



Meat thermometer with prob in bag



Towels cause is it’s cold as fuck in my Rocky Mountain garage. (Wife has banned me from cooking doodoo in the house)



Once the temp reads 150, I set a timer for 90 minutes. Let them cool and fill my tubs.

A big thing to remember is you have to fill the steamer up every 40 minutes or so. In the winter, it can take a hour or two to reach temp but that’s why I use towels. In the summer I am usually at temp in 45 minutes.

Hope this helps some folks out. Each of these can be built for less then $100 and you can stack them up quick to give the ability to process 200+ lbs of sub.

I would suggest getting everything dialed and running smoothly before you do a 200 lb run

 

[nurrgle]

I don’t usually take many pics but here are a few randoms of some B+

 

[projectinfo]

View attachment 4234501

View attachment 4234503
View attachment 4234505

I don’t usually take many pics but here are a few randoms of some B+

The other part i alwase messed up on was dunks .

How do you dunk n drain your tubs for 2/3/4 flushes?

We used to just pick em up, or hold another tote over it. The we found cookie drying racks ontop then flip the tub over. But still you beat the shit out of the top myc layer

 

[nurrgle]

The other part i alwase messed up on was dunks .

How do you dunk n drain your tubs for 2/3/4 flushes?

We used to just pick em up, or hold another tote over it. The we found cookie drying racks ontop then flip the tub over. But still you beat the shit out of the top myc layer

My sub tek is set and forget and I usually trash the sub after the third flush so I can make room for more tups.

If I was dunking, I just use about a gallon of water, let the sub soak then use a small drain hole at the bottom of the tub I drilled to drain the tup.

In my experience, dumping after the second or third flush and replacing with a fresh tub is much easier, produces good fruits that don’t look like shit, and my yield over the year is on a average 25% larger.

 

[projectinfo]

My sub tek is set and forget and I usually trash the sub after the third flush so I can make room for more tups.

If I was dunking, I just use about a gallon of water, let the sub soak then use a small drain hole at the bottom of the tub I drilled to drain the tup.

In my experience, dumping after the second or third flush and replacing with a fresh tub is much easier, produces good fruits that don’t look like shit, and my yield over the year is on a average 25% larger.

So you just cut everything off flush and put a plastic bag or some shit over the sub and wait for a new pinset for second flush instead of dunking ?

How do you get an even pinset?

Are you using personal monocultures? Or just spores, or a slant from some guy on the internet?

 

[nurrgle]

Personal agar to grain jars to spawn bags.

I use parchment to set my first flush and then after that the next one or two are pretty even. After that I usually trash the sub.

 

[theburnoutkid]

You say you're a member of shroomery. Search for Bods easy AF tek list. Lots of great info everything you need to know really all in one list

 

[projectinfo]

You say you're a member of shroomery. Search for Bods easy AF tek list. Lots of great info everything you need to know really all in one list

Your right. Wow . Thanks