What wack QBSo this basically replacing the whack qb?! It’s gonna shine
I’m so impressed with what leds are doing now. I’m so glad to be making the switch. I can’t wait to see what the logics will do!
I can’t wait to see what this little project of yours will do!!
I do this for a hobby. And to help my son understand electric. He wants to be an electrician. I've been an electrician for 20 years. And I still dont know everything. Theres lots to be learned daily. But on here people build one or two lights. And they know everything. I build power plants. And do stress cones that carry high voltage. 14.4kva and 4160v AC. 480, 277, all of it. I helped build the largest nuclear power plant on the east coast. And one inArizona. Abitiby Bowater.. turned a coal fired power plant to woodchips stem turbine powered. My best of all time was a 33,000 Hp motor. That had 36 feeds of big red. Its 3 conductor 500mcm. Inside a shielded armored cable. Took forever to wire up. But when that lady took off. You could feel the static coming off of her from 40 feet away. It was amazing.Looking good so far man. I can definitely tell that you know what you're doing with your light setup. I saw over in another thread where people were giving out bad info that was potentially dangerous, and then they attacked you for pointing it out. It's just noise. Another thread ruined by dumb asses.
There are some of us who appreciate seeing threads like this one.
I just ordered some 0ne inch thick heat sinks from heatsink USA. Wish I would of read this thread before hand. So those l shape aluminum rails disperse enough heat for the boards to run safe. Well when i buy more boards i will buy the l shape aluminum. ThanksGetting there. So I've decided to not use the four 3000k lm301b strips in this build. So I ordered 4 four more bridgelux 1 footers in 3k. To put in place of those. That way the entire build is made of bridgelux strips.
View attachment 4279014 View attachment 4279015
Yeah all my strips are on either alum angle or alum c channel.I just ordered some 0ne inch thick heat sinks from heatsink USA. Wish I would of read this thread before hand. So those l shape aluminum rails disperse enough heat for the boards to run safe. Well when i buy more boards i will buy the l shape aluminum. Thanks
I bought some Samsung leads from arrow.com. was going to use 8 in 3x3 how far apart can they be mount .I was thinking 4 inches. There 26.3v at1.4a.Whoop whoop. Early delivery.
New light build. (16) 560mm Bridgelux EB series gen 2s.
View attachment 4285499
SL-B8R3N80L1WWWhat strips are they? That's a weird voltage
That's max the 26.3vdc a normal 24v type A driver. That's the strips I have except mine are 4kI bought some Samsung leads from arrow.com. was going to use 8 in 3x3 how far apart can they be mount .I was thinking 4 inches. There 26.3v at1.4a.
That's 31x31 which is 7.1 sqft. I'd run atleast an hlg-320h-24a on 10 strips. The hlg320 A type will push 10 strips at 1334mA bc its max is 13.34A that's 32.01w per strip. X's 10 strips. 320.16w that's 45w per sqfthey bro so how many strips and what driver would you recommend for the 80x80cm ?
I'd run 10 of those strips on a HLG-320H-24A in parallel. @big cfeezzieThat's max the 26.3vdc a normal 24v type A driver. That's the strips I have except mine are 4k
yeah bro the EB series in my 80x80cmThat's 31x31 which is 7.1 sqft. I'd run atleast an hlg-320h-24a on 10 strips. The hlg320 A type will push 10 strips at 1334mA bc its max is 13.34A that's 32.01w per strip. X's 10 strips. 320.16w that's 45w per sqft
Edit: sry replied to the wrong person. But for your tent @ThatSpudGuy you want the eb series strips right?