Ohhhh, now i get ya, you build your tables just high enough than you can then use the 2x12 with pond liner reservoir under it? that right?Thats why I used the 2x12 reservoir with pond liner. Massive capacity and low profile.
Do you use any PK boosters? Im growing in soil and i have to raise my GMB quite abit higher with my additives to get to 1000ppm. Also, do you have any experince with running a pk booster like monster bloom starting from week 3 in a 12 week strain?I did the math in Excel and a full run with GH costs me $998 and a run with Jacks would be about $300 ish from my guesstimate. Of course I have to run it and prove that, plus I am sure some numbers will change a little if I make adjustments, use MPK or whatnot.
Also these calcs are based on one constant that isn't really constant and thats a watering frequency of every other day. I figure that it kinda averages out that way over the run and it's good enough for cost estimation purposes.
View attachment 4296549
Ah Thanks. Just wondering if im wasting my money running monster bloom. Usually start it half dose week 3 then full strength week 4 for a 8 week strain. But i feel like running it so early for a 12 week strain is a bad idea.I boost the PK by adding more GH Bloom and less GH Grow. With Jacks I will just Monopotassium Phosphate to do that.
Well I added side lighting and thats how I get large yields. I still hover around a gram per watt when I veg them long enough (didn't do that last round) but I have more watts. lol Other than that genetics has a lot to do with it. Some strains yield really well.Do you have any tips on achieving 3pounds a light with 10 gallon soil, under 1000w gavitas and co2?
I am usually up at nite lolCheers for the reply in the AM btw.
I built these 2x4 tables with 2x4’s and 4x4 fence posts & casters recently.Ohhhh, now i get ya, you build your tables just high enough than you can then use the 2x12 with pond liner reservoir under it? that right?
I have good access to a couple different floor drains to connect runoff . So placing it underneath would be perfect.
you got any pics of your old setup?
Nice build.I built these 2x4 tables with 2x4’s and 4x4 fence posts & casters recently.
I like the separate 2x4 tables so you can remove bottoms etc if needed. I run SOG as well and I love have the 4x4 area able to be split in the middle to work in and also run two separate flavors if need be.
I hope it helps!
I’d add some simple 2x2’s for trellising ( staple gun is useful )
Happy growing
is that the de that was giving you a hard time a few pages ago?The plant with the 600 watt CMH over it seems to be keeping up with the others. Pretty excited about this.
They are looking good broSo today I flushed the plants before their feeding. Don't want any salt buildups. Plants are doing well, you can hardly tell I defoliated them yesterday.
The room with Jacks appears to be doing well, no signs of problems so far.
The plant with the 600 watt CMH over it seems to be keeping up with the others. Pretty excited about this.
Here are some pics after the flush. You can see I pulled another trellis down to finish out their training.
View attachment 4298975 View attachment 4298977 View attachment 4298980 View attachment 4298982 View attachment 4298984
No this is a 600 watt CMH Growers Choice bulb that I put in one of the Sunsystem 1kW ballasts running at 60%. Goal is to do with 600 watts what I have been doing with 1000 watts.is that the de that was giving you a hard time a few pages ago?
how long has it been running? ive read that chm bulbs have much shorter lifespans when used with regular ballasts. ive been considering switching half my flowering room to cmh to see what the fuss is about, would be nice if i could try it out without switching my ballasts out tooNo this is a 600 watt CMH Growers Choice bulb that I put in one of the Sunsystem 1kW ballasts running at 60%. Goal is to do with 600 watts what I have been doing with 1000 watts.
The bulb has been in since saturday. It is designed to be used with HPS ballasts. https://growershouse.com/growers-choice-630w-de-double-ended-cmh-ceramic-mh-lamp-3k-r-red-enhancedhow long has it been running? ive read that chm bulbs have much shorter lifespans when used with regular ballasts. ive been considering switching half my flowering room to cmh to see what the fuss is about, would be nice if i could try it out without switching my ballasts out too