Cutter New Web site

[grisbi]

Im so sorry, i missunderstood your previous answer. Thats awesome! So if im running the whites at say 100mA each, what current will the xpg run at?

It would be great if you had a setup which is maximized in the sense of full current for white=full or near full current on reds. Being so efficient it seems like a waste to run xpg at 200mA.

could solve this problem on putting the xpg on a second channel

 

[diggs99]

could solve this problem on putting the xpg on a second channel

Grisbi, you already running under your cutters?

if so , how do you like them so far?

 

[diyled]

Finally manged to navigate through your site.

Id appreciate as swift response to my email

 

[Rocket Soul]

Im so sorry, i missunderstood your previous answer. Thats awesome! So if im running the whites at say 100mA each, what current will the xpg run at?

It would be great if you had a setup which is maximized in the sense of full current for white=full or near full current on reds. Being so efficient it seems like a waste to run xpg at 200mA.

Hey Mark. Still hoping for some more info on these. Will be ordering another batch from you soon i think.

 

[welight]

Finally manged to navigate through your site.

Id appreciate as swift response to my email

Hi DIYled
I emailed you yesterday?
Cheers
Mark

 

[welight]

Hey Mark. Still hoping for some more info on these. Will be ordering another batch from you soon i think.

Hi Rocket
No worries, what do you need to know?
Cheers
Mark

 

[Rocket Soul]

Hey Mark

Im trying to figure out the ratio of white and red light. Or even the power levels: how much white relative to red. This is inorder to figure out if i need boards with red sup, or a some separate xpg boards.

Also hoping for some info from your testing, ppf/w, spectrum (i i thi i saw some on IG) and at what point will there be custom spectrum options (3500k 90cri looks like a perfect mate...)

 

[diyled]

Hi DIYled
I emailed you yesterday?
Cheers
Mark

No email here..

 

[sethimus]

@welight ist there a SPD of the Super Spectrum Spread, using Nichia 757 V3 2000K 80 CRI(36), Nichia Optisolis 5000k 97CRI(36) with centre channel of Cree XQ 660nm( and 730nm(4) you offer in your BG strips?

 

[welight]

No email here..

can you check spam folder I certainly emailed you, or PM here
Cheers
Mark

 

[welight]

@welight ist there a SPD of the Super Spectrum Spread, using Nichia 757 V3 2000K 80 CRI(36), Nichia Optisolis 5000k 97CRI(36) with centre channel of Cree XQ 660nm( and 730nm(4) you offer in your BG strips?

Let me check today, your talking about the boundary rider strips?
cheers
Mark

 

[welight]

Hey Mark

Im trying to figure out the ratio of white and red light. Or even the power levels: how much white relative to red. This is inorder to figure out if i need boards with red sup, or a some separate xpg boards.

Also hoping for some info from your testing, ppf/w, spectrum (i i thi i saw some on IG) and at what point will there be custom spectrum options (3500k 90cri looks like a perfect mate...)

Hi Rocket
The 272 has 256(midpower) whites to 16 reds( high power). I will be putting up today variants of the boards in all the colours, 90 CRI, Optisolis, Blues, UV etc
Cheers
Mark

 

[grisbi]

Hi Rocket
The 272 has 256(midpower) whites to 16 reds( high power). I will be putting up today variants of the boards in all the colours, 90 CRI, Optisolis, Blues, UV etc
Cheers
Mark

is that possible to make the red diode in a separate channel?

 

[welight]

is that possible to make the red diode in a separate channel?

potentially but would require a Board redesign, we have a new strip board with 2 channels for supplementing the 272, can be 12 led in series or 2 channels of 6 for XP size leds

Cheers
Mark

 

[sethimus]

Let me check today, your talking about the boundary rider strips?
cheers
Mark

yes, the 3 channel strip with the extra wide spectrum

 

[grisbi]

potentially but would require a Board redesign, we have a new strip board with 2 channels for supplementing the 272, can be 12 led in series or 2 channels of 6 for XP size leds

Cheers
Mark

hmmmm im about to make uv and emerson effect strip with your new 2 channel pcb

 

[diggs99]

hmmmm im about to make uv and emerson effect strip with your new 2 channel pcb

grisibi,

i asked before but you may not have seen it.

Can we get an update on how your liking your lights you built with cutter strips?

specs? how are they growing?

i assume well, your back in the cutter thread about to buy more lol

Thanks bud

 

[sethimus]

Let me check today, your talking about the boundary rider strips?
cheers
Mark

friendly reminder

 

[marosa]

this stupid cutter website
sometimes i think everyone in the light industry is braindead and has no further options to earn money
how can people ruin websites like this ? or dont give a damn about infos from their products
suck it sucker

 

[Airwalker16]

this stupid cutter website
sometimes i think everyone in the light industry is braindead and has no further options to earn money
how can people ruin websites like this ? or dont give a damn about infos from their products
suck it sucker

What happened?