Sedan
Well-Known Member
Production of the Grow bed and SDU (stationary drainage installation)I look forward to seeing your innovations at work.
for the tent Mars Hydro with dimensions 1m X 1m.
Table dimensions: 0.8m X 0.8m. Height 0.8m.
The volume of the basket in the grow bed: 0.6m X 0.6m X 0.3m
Materials:
timber, board.
fasteners: steel corners, tin brackets for drywall constructions, 20 mm screws.
Basket: 2mm thick galvanized wire mesh
Pallet: cellular polycarbonate.
Matte white paint.
The cost of all materials: $ 18
I intentionally made the table larger than the basket so that the basket was deeper and water did not spill over the edge of the pallet.
Also, the second belt, connected by steel corners, the inner gives structural rigidity
the lower side jumpers are made slightly inclined forward, in order to mount a pallet with a slope on them.
A pallet is a piece of polycarbonate that fits with slots for legs
and bends down a bit to create a kind of gutter.
The basket for the grow bed is secured by a canopy to the tin brackets.
water flows down the gutter at one point.
There is nothing to be wise - you can’t imagine any easier!