Only in Canada-er eh?

[The Hippy]

Right to your door free with your prime membership. To funny where we've come.
https://www.amazon.ca/Ton-Complete-...53THGSW7E5B&psc=1&refRID=ME6XQPJSA53THGSW7E5B

Turnkey basically. I love the fact somebody actually brings this to your door....free......or $3.99 for Monday.
I'd like to see that delivery guys face.

 

[The Hippy]

Pardon me...there's a whole bunch of them on amazon canada. One delivery as they actually stock it. Crazy

 

[willvape]

Not a bad review up there, might be a good investment. Being stuck in a wheelchair I love Amazon Prime!

 

[Flash63]

I made an order last night @ 11:00pm and the fucker woke me up,ringing the bell before 9:00am...I must have been 1 of 94...

 

[gb123]

6 hun for a 6 ton? seems expensive for what ya get can order and build one for less

 

[AquaTerra]

6 hun for a 6 ton? seems expensive for what ya get can order and build one for less

Well descent plates would be around $600 and then another $300-400 for a 1o ton press.

 

[Rider101]

Well descent plates would be around $600 and then another $300-400 for a 1o ton press.

Wow dude your a little off on your prices. By a factor of 10.

Pro-Lift 6 Ton Bottle Jack
Model # B-006D|Store SKU # 1000791797

• (0)
• Write a Review
• Q&A (0)

$29.67 / each

Plates are a little more

Oniche Pre Press Mold 2x4 inch Rosin pre Press molds 6061 Aluminum Mold for extracting (2x4inch Pre Press Mold)

by Oniche

8 customer reviews




Price: CDN$ 49.99 & FREE Shipping. Details

And that is Canadian eh LOL.

 

[AquaTerra]

Wow dude your a little off on your prices. By a factor of 10.

Pro-Lift 6 Ton Bottle Jack
Model # B-006D|Store SKU # 1000791797

• (0)
• Write a Review
• Q&A (0)

$29.67 / each

Plates are a little more

Oniche Pre Press Mold 2x4 inch Rosin pre Press molds 6061 Aluminum Mold for extracting (2x4inch Pre Press Mold)

by Oniche

8 customer reviews




Price: CDN$ 49.99 & FREE Shipping. Details

And that is Canadian eh LOL.

Yah where's the heat plates? I'm not talking about a bottle jack but a 10 tonne press.

 

[Rider101]

Yah where's the heat plates? 'm not talking about a bottle jack but a 10 tonne press.

Please reread the add.

" Power frame integrate 6 ton hydraulic bottle jack (upgradable to 8 ton), heavy-duty spring installed into the steel frame away from working area; easy to replace hydraulic bottle jack;"

https://www.amazon.ca/Ton-Complete-...53THGSW7E5B&psc=1&refRID=ME6XQPJSA53THGSW7E5B

 

[Rider101]

Yah where's the heat plates? 'm not talking about a bottle jack but a 10 tonne press.

Half the price for plates that you thought it was.

New 3x5 Inch DIY Heat Press Plates Kit - Dual Heated Platens - Build 10-12 Ton Hydraulic Press Machine

by Dabpress

6 customer reviews
| 5 answered questions



Price: CDN$ 299.99 & FREE Shipping. Details

https://www.amazon.ca/Uncaged-dp-rp35-Attached-Hydraulic-Upgraded/dp/B07KLQDS57

 

[AquaTerra]

Please reread the add.

" Power frame integrate 6 ton hydraulic bottle jack (upgradable to 8 ton), heavy-duty spring installed into the steel frame away from working area; easy to replace hydraulic bottle jack;"

https://www.amazon.ca/Ton-Complete-...53THGSW7E5B&psc=1&refRID=ME6XQPJSA53THGSW7E5B

You showed a bottle jack for $26 not a full press like this https://www.princessauto.com/en/detail/10-ton-benchtop-hydraulic-shop-press/A-p8604571e

 

[gb123]

My 2" plates cost me less than 40 bucks from the metal supermarket.

Dimart Heating Element Single End 9x50mm Cartridge Heater AC 110V 100W

by Dimart

3.1 out of 5 stars 2 customer reviews




Price: CDN$ 4.59 & FREE Shipping
PIDS..

Inkbird PID Temperature Controller ITC-100VH 100V 240V Thermostat with SSR Output Relay Alarm Output

by Inkbird

4.0 out of 5 stars 1 customer review




Price: CDN$ 39.99 FREE One-Day










1 new from CDN$ 39.99
Powerbuilt 647504 Heavy Duty 20-Ton Shorty Bottle Jack

by Powerbuilt

4.4 out of 5 stars 2 customer reviews




Price: CDN$ 61.49 Prime FREE Delivery









3 new from CDN$ 61.49
Size : 20-Ton

120 bucks for the electrical parts..and jack..



etc THE STUFF IS CHEAP and there are DIY vidoes to help as well...


The heaters cost me about ..oh fuck I posted this a while back
CHEAP MAKE YER OWN SHIT>... lol
my 20 ton cost me less than 300 bucks in total!
YOu can buy a harbor freight for 275 and plates already wired for 300 or less even
thats less than 600 for a 20 ton press ..!!
so for the price of a harbor freight for 270 and the rest at 140
its less than 5 hun for a 20 ton press DIY

 

[gb123]

https://www.rollitup.org/t/diy-lol.953383/

 

[cannadan]

Half the price for plates that you thought it was.

New 3x5 Inch DIY Heat Press Plates Kit - Dual Heated Platens - Build 10-12 Ton Hydraulic Press Machine

by Dabpress

6 customer reviews
| 5 answered questions



Price: CDN$ 299.99 & FREE Shipping. Details

https://www.amazon.ca/Uncaged-dp-rp35-Attached-Hydraulic-Upgraded/dp/B07KLQDS57

really not too bad all totaled in...
I would prefer the already assembled option...lol..

Hey GB...whens the production line set to begin..lol

 

[gb123]

I thought about it ...but you can buy the wired plates and a harbor freight 20 ton for 600

 

[ttystikk]

3 ton, 6 ton, 10 ton, 20 ton...

What's the point of higher pressure? Isn't there a limit of diminishing returns?

 

[Farmer.J]

3 ton, 6 ton, 10 ton, 20 ton...

What's the point of higher pressure? Isn't there a limit of diminishing returns?

I find 3x5 plates rip parchment paper at anything higher than 6tons so unless you are going to have larger plates you don't need anything more than 6t

 

[gb123]

3 ton, 6 ton, 10 ton, 20 ton...

What's the point of higher pressure? Isn't there a limit of diminishing returns?

size area of plates determines pressure per sq incn

 

[gb123]

I find 3x5 plates rip parchment paper at anything higher than 6tons so unless you are going to have larger plates you don't need anything more than 6t

I pre squish my pucks and have no issue with paper ripping apart. Im using both hands on my 20 ton at the end using 3 by 5 inch plates

oil seeps through the paper though WTF or how Im not sure
I squish a 1/2 oz at a time
I do not use bags for herb.
.kief yes though

 

[Rider101]

You can also rent these units at some hydro shops here in BC now.

For those who would like to know how these systems work here is a good video.