Therrion
Well-Known Member
What driver would you guys suggest to run 16 of these https://www.digikey.com/product-detail/en/SL-B8T3N80LAWW/1510-2450-ND/8536568/?itemSeq=304453521
5' x 5' vegMight work out cheaper on two meanwell 320h-24s , bit more power too, though don't know what area your lighting
Yet to build a strip light.Might work out cheaper on two meanwell 320h-24s , bit more power too, though don't know what area your lighting
Certainly keeps half the light on while you get a replacement.Yet to build a strip light.
Is it true a split offers fault tolerance in the event of driver failure? Wired so only half the strips go dead.
I've read where some keep a spare driver on hand.
Double check the data sheets. At test current it would work but at 1750ma it could be over the drivers available voltage.I think I'll go with 2x HLG-320H-C1750B per 5' x 5' fixture and wire them in series.
i do go with ts lite one 1000w led, the ppe is seems better than older series.What driver would you guys suggest to run 16 of these https://www.digikey.com/product-detail/en/SL-B8T3N80LAWW/1510-2450-ND/8536568/?itemSeq=304453521
You would go with a mars ts 1000w that only draws 150w to light a 5x5?i do go with ts lite one 1000w led, the ppe is seems better than older series.
The forward voltage is 22.4 at 8 strips per driver is 179.2v. Max voltage on the driver is 183Certainly keeps half the light on while you get a replacement.
Double check the data sheets. At test current it would work but at 1750ma it could be over the drivers available voltage.
I don't think they show a nice graph so you can see the fV exactly.
183 volts/8 strips = each strip gets a maximum of 22.873 volts, right? I'm estimating the HLG-320H-1750 will top out at about 1600 ma into these strips due to hitting the voltage limit. I could be wrong due to using a hand drawing of a non linear graph with only 3 data points.The forward voltage is 22.4 at 8 strips per driver is 179.2v. Max voltage on the driver is 183
Nice.Thanks for the help guys. I decided to by 4x QB 132 v2 4000k to cover the mothers and 8 for the veg with 3x 240H-C1750
I mean ts3000 one, it said shall get 5*5 room well covered.You would go with a mars ts 1000w that only draws 150w to light a 5x5?
I know its only veg but cmon man.