Amnesia haze + White widow auto’s DwC!

[EverQuest]

Hello,
I am growing Amnesia haze and white widow auto’s in 5 gallon buckets. I have 3x3x6 grow tent a 600W LED dual airpump fan and humidifier. I also have 4inch incline fan and filter. I am 4 days in including seed soaking and germination.
]Amnesia Haze as follows-
Sunday 13th- seed in water/darkness waited 24 hours.
Monday 14th- seed in moist paper towl and baggy and darkness another 24 hours.
Tues 15th- tap root exposed on bottom of the Pop rooter. Placed in 6inch net pot in 5gallon DWC.
PH-6.4 ,PPM 15-20 ,Temp 75/ bucket temp73 ,Light 18hours/24 , Water level
1inch up net pot.
Weds- Seed sprouted!!! PH-6.4,PPM-15-20,Temp 75 tent/73bucket Hum 42, light 18hours/24 inch,Water lvl 1inch pot.
Thurs 17th, PH6.4,PPM 20,Temp 75tent/73bucket. Water level 1/2 inch below net pot.
I lowered the water to make sure the Pop rooter didn't get to wet. I will lower it even more when roots begin grow past net pot. I posted some cool pics of the amnesia haze sprouting up.
For the the White Widow auto—-
Monday- wanted to try new things so this one I just put seed in water waited 24 hours then straight to net pot and tent.
Tues- nothing
Weds- I cheater and peeked and bingo the tail root sprout!!
Thurs17th-tap root is now coming out of bottom of rooter!! Temp75/bucket73,hum45%,Light18h /20 in.

 

[EverQuest]

Sorry I don’t t know why pics ended up so weird.Feel free to give any pointers thanks

 

[EverQuest]

Hello, All pointers and tips welcome. Amnesia haze auto coming in nicely no roots to coming out of bottom of 6inch net pot. No nutes yet just been keeping rapid rooter moist not wet. I had my water temp little high first 3 days now going keep it at 68-70. Also my leaves looked little curled not sure if light was to close so i moved it back to 24 inch.
PH-6.4 ,PPM-22,Temp-75 and bucket 68-69, Light-24inches. Water level 1/2 inch below net pot.
WW auto is coming up so I put little card around so light cant get to the roots.
PH-6.3,PPM-24,Temp same water level is 1 inch above net pot.

 

[EverQuest]

Hey its Saturday and stepsister are doing great. Tomorrow will be 1 week. I noticed my PH went up and there was some of those lava rocks in my DWC bucket. I decided to just do RES change to buckets. I cleaned them out good and then added my Ro water and calimagic and rapid start and hydroguard.
Amnesia has looked little dried out I noticed my clip fan blowing must have dried out. So I moved it. The leavesstill looks little curled but the leaves feel soft and good.
I decided to name Amnesia haze auto pinwheel and WW named gumby!
Good thing about Gumby is seedling ,came up and we got leaves now one of fake leaves is bigger!
Here are pics for today! This is my First time grow so any pointers tips welcome.
Pinwheel-Ph-5.8,PPM-84, Temp76/ bucket 68 Light 18 hours 24 inches, Hum-50%.
Gumby- same except ppm is 64!

 

[EverQuest]

Gumby and Pinwheel are doing good. I noticed a mistake lol. While cooling down my DWC with just water bottle it raised water level which i think has been overwatering so that was easy fix. Also Gumbys little cot-leaf had small tear on the underside could been to over watering not sure. I also noticed Gumby has little yellow in leaves could been over watering or light problem. Little to no nutes atm just using cal/mag and rapid start and hydroguard.
Amnesia haze auto is first WW auto second////PH-5.83 ,PH 5.9, PPM-66/68, Hum46%,Temp76, Light 24inch-18hours. Height of plants 5/8 inch and 1inch. Height water 2inches below net pots. This is my first grow and pointer or tips welcome.

 

[EverQuest]

Hello on Monday Oct21,
Well today Gumby has been growing fast! I noticed it had some yellowing of leaves i hope the cal/mag i mixed is ok. Pinwheel looks ok still has damaged fake leaf and droopy kind of but i hopefully fixed that with lowering the water lvl in DWC to 2 inches below and when i add water bottle it goes to 1 inch below. Any tips or hints welcome this is my first time grow. Here are a few pics below.
Amnesia haze- Ph 5.9 ,PPM 80 ,temp of bucket 64-69
White widow Ph5.9,PPM 60, temp of bucket 64-70.
Grow tent temp70-77, hum48% light 18h/ 24 inch

 

[EverQuest]

Hello, things are going good I noticed root dropping past net on the Amnesia Haze auto and it has responded well no thanks to me over watering it with water level in 5 g bucket. The White widow auto is growing faster and seems to have caught up with her step sister! I have noticed both plants are growing another set leaves here are some more pics. This is my first time growing any tips or advice welcome and thanks!
PH-5.8,6.3, water bucket temp 63-69, Tent temp-77, Humidity 49%, light 600w LED 24 inch/18hour, water level 2inch below net pot.
No nutes just calimagic rapid start and hydroguard i go to nutes this weekend after bucket change.

 

[EverQuest]

Weds 23 Oct 2019, Hello the plants are doing good the Amnesia haze auto-pinwheel is a week old and has roots going past net pot. It finally got past the rookie mistake i made of overwatering. Its starting to grow another set of leaves. The White widow auto is growing nicely and looks like it might pass Pinwheel! It is growing new leaves no sign of roots pass net pots but I imagine it be soon. Pictures at bottom of Pinwheel and Gumby.
Ph5.65, 6, PPM 130-160, Temp75 bucket63-69,Hum 45-50% 600w led 24inch/18 hours, water level 2inch below net pot. Using RO water and just calimagic and rapid start and hydroguard. This is my first grow any tips pointers welcome.

 

[EverQuest]

 

[EverQuest]

Thurs 24 Nov 2019,
Hello, the step sisters are growing good a little slow at times I noticed the Amnesia haze auto has some purple features I believe this is the actual genes and not a N or another type of deficiency. I still haven’t gave any nutes just using RO water and calimagic, rapid start, and Hydroguard. This is first time grow And I'm doing DWC and pointers or tips welcome. Pictures are below.
Ph 5.6,6.1, PPM 160-180, Temp of tent 77 and buckets are 69-63. Light 600w led at 24 inch/18h. Humidity 45-50%. Water level 2 inch below net pot.

 

[Laughing Grass]

Looking good, first grows are exciting. I started growing in dwc as well. You can start giving them really light nutrients now like 1/4 strength or less. Now I run weak nutrients as soon as the seedlings go into the buckets 250ppm or so not including calmag. I did the weekly reservoir change too and have found it's not really necessary for seedlings in the first couple weeks as they're barely consuming anything. It's great that you're running hydroguard right from the start and not waiting for there to be problems.

 

[EverQuest]

Looking good, first grows are exciting. I started growing in dwc as well. You can start giving them really light nutrients now like 1/4 strength or less. Now I run weak nutrients as soon as the seedlings go into the buckets 250ppm or so not including calmag. I did the weekly reservoir change too and have found it's not really necessary for seedlings in the first couple weeks as they're barely consuming anything. It's great that you're running hydroguard right from the start and not waiting for there to be problems.

Thanks yeah its so cool I be giving nutes this Saturday 1/4 GH series like you said.

 

[EverQuest]

Friday 25th,
Hello, things are going good both plants have roots below net pot and tomorrow ill be doing a res change and adding nutes tomorrow. They are also starting there 2nd set of true leaves. Pinwheel seems to be behind Gumby at the moment but lets see how they do with actually nutes lol. Pictures at bottom. Any pointers or tips are welcome.
PH 5.9-6.4, ppm 180-160,Light 600w led 24 inch/18 hours, bucket temps-62-69, tent temp-78, humidity 45-50%.

 

[EverQuest]

Sat 26th 2019,
Hello,
The stepsisters are doing well. Several roots past the net pot now so i did complete change of water and added nutes this time. Im using gh flora series. This has been a lot fun and cant wait to watch them grow.
PH-5.9, PPM 318-330, 600w led 24 inch/18hours, Temp of tent 75-80, buckets kept at 63-69, humidity at 45-50%. Pictures at the bottom and pointers and tips welcome.

 

[EverQuest]

Sunday 27th 2019,
Hello the Autos are doing great. Im hoping i get to right height so i can FIM these. Tues will be 2 weeks for Pinwheel and Friday will be 2 weeks for Gumby. The second set of leaves are starting to show classic 3 part weed leaf. Roots looking great. Pictures at bottom any tips or hints welcome.
PH-6.1, Ppm 316-318, 600wLED 24inch/18hours,Temp 75-79 with buckets at 62-69,Humidity 51%, water level 1-2 inch below net pot.

 

[Jypsy Dog]

You should be a little farther along... Your pH is a little high for me. Take a look at this grow and see if it helps.

Weekly Growing Schedule For Hydroponics - Get 30% More Yields

Want 30% higher Cannabis yields? Here's our weekly hydroponic grow schedule to optimize nutrients, pH, TDS, temperature, humidity and more

www.ilovegrowingmarijuana.com

 

[Jypsy Dog]

With the LED, don't be afraid to let your air temp go in the mid 80's.

 

[EverQuest]

Monday 28th,
Hello the autos are going good. I have noticed the ph rising but was still within limits. I lowered the PH today. Also my tent has reached temperature of 82 i thought it was to much so would cool it down. Ill let the temp and humidity come up a bit. The growth is going good on top as well as the roots. I cant wait until i hit week 2. Any hints or tips welcome and appreciated. Pictures at the bottom.
PH 5.9, PPM 315-320, Temp of tent 77-81 bucket at 63-69, Humidity 56%, 600w Led 24inch/18 hours, water level 1-2 inch below net pot.

 

[EverQuest]

Tues 29
Hello, the stepsisters are looking good on top and the roots. Gumby looks bigger than Pinwheel at the moment tomorrow will be 2 weeks for the Amnesia haze auto the White widow auto is 2-3 days behind that. Any tips or hints welcome. Pictures at the bottom.
Ph 5.9-6.0, PPM 330 338, Temp of tent 81 Temp of bucket 63-69, Humidity 53%, 600w LED 18h/24 in. Water lvl 1-2 inch below net pot.

 

[EverQuest]

Weds 30th
Hello,
The autos are looking great. I had to leave for Tool show last night and had my wife keep the temp for buckets in check. Lots of new growth on top! 3 set of leaves are coming in now. Any tips hints welcome pictures at bottom.
PH5.8,5.9, PPM330, temp tent 82 buckets at 63-69, 600w LED 24inc/18 hours, Humidity 56%. Water lvl 1-2 inch below net pot.