1st time Aero Cloner

[Dougs Nugs]

What up guys and girls,

I’ve been a rock wool man for over 10 years but want to change over to aero cloning. Any tips and pointers much appreciated.

Right now my plan is to on/off every 15 minutes with

200ppm
Clonex
Hormex B1
Great White
Ph 5.6

Thoughts feedback?

Happy growing

Doug

 

[nurrgle]

The only thing I would add is the change the water. I change mine every week and have seen much quicker root times and better success rates.

 

[CoB_nUt]

Plain tap water by itself will work.Unless you have shitty tap.

 

[70's natureboy]

I did Jiffy pellets and rockwool for many years. Now I'm lazy and just buy Clone King's. It's just so easy and I don't believe I could build one for much cheaper.

 

[Wastei]

Drop all that unnessecary stuff and run bleach/poolshock. I would go for household bleach because of ease of use at that size of reservoir. I get roots after 7 days using only bloom nutrient at few drops a gallon, maybe 50ppm. I give advice to novice growers that you can clone plants with great success using a glass of water as long as you change the water daily.

Here's a chlorine dilution calculator, aim for 0.5-1 ppm. Even 5ppm is safe to use and is a good dosage for treating pythium(root rot)http://www.foodsafe.ca/dilution-calculator.html

Don't try to reinvent the wheel if you don't have to. They will try to sell you all kinds of rooting compounds. None is needed.

 

[Dougs Nugs]

thanks so much everyone for all the amazing responses!

I’m just over rockwool in general - as for transplanting do you guys just drop the roots gently in coco or preferred medium?

I’m planning on going coco DTW - thoughts / experience on how to transplant?

Best

Gus W

 

[Dougs Nugs]

Drop all that unnessecary stuff and run bleach/poolshock. I would go for household bleach because of ease of use at that size of reservoir. I get roots after 7 days using only bloom nutrient at few drops a gallon, maybe 50ppm. I give advice to novice growers that you can clone plants with great success using a glass of water as long as you change the water daily.

Here's a chlorine dilution calculator, aim for 0.5-1 ppm. Even 5ppm is safe to use and is a good dosage for treating pythium(root rot)http://www.foodsafe.ca/dilution-calculator.html

Don't try to reinvent the wheel if you don't have to. They will try to sell you all kinds of rooting compounds. None is needed.View attachment 4416755

what size GPH pump do you use?

 

[Wastei]

Just a simple Marina 75 pump. 0.2 GPH. Been using the same style of cloner forever, just a simple and small DWC. 100% success rate on hundreds of cuttings!

 

[CoB_nUt]

When my DIY aerocloner is full. A cup of tap water and ambient light works wonders!
I deleted the pics but the link is to another thread similar to this one.Great info there as well.
My aerocloner costed maybe $11.00 to make. 8 of that was for the pump @ OP

Are clone machines worth it?

I DIY'd a lid out of a black plastic cutting board, hole sawed 2" holes for standard 2" collars, bought assorted color puks for different strains. That's a great idea that had not occurred to me. You could make as many or as few sites as you wanted that way. Thanks for sharing a cool idea. :-P

www.rollitup.org

 

[diggs99]

When my DIY aerocloner is full. A cup of tap water and ambient light works wonders!
I deleted the pics but the link is to another thread similar to this one.Great info there as well.
My aerocloner costed maybe $11.00 to make. 8 of that was for the pump @ OP

Are clone machines worth it?

I DIY'd a lid out of a black plastic cutting board, hole sawed 2" holes for standard 2" collars, bought assorted color puks for different strains. That's a great idea that had not occurred to me. You could make as many or as few sites as you wanted that way. Thanks for sharing a cool idea. :-P

www.rollitup.org

Yep, i concur with the COB

My diy aerocloner cost me like $40(used a nice cooler) and about 30 mins to build , its a 15 site cloner and it works like a fkn charm lol...its like cloning for dummies for real....tap water or low ppm nutes and low lighting, thats it.