rusty spots on my plants ? help

[canadian blazer]

so today i checked in on my grow and noticed some leaves turing a rusty colour from inside of the fan leaves on my zkittlez glue plants. im not sure whats wrong. im growing in a 4x4 tent with 600w light. my lights on temp is 76°f and humidity is 40% i run a 100L resivoir with tap water (101 ppm) my nutes are GH i mixed 90ml of calmag 33ml of micro 33ml of grow and 20ml of bloom i also added 2 ml of superthrive and i have a bluelab ph doser thats set to 6.1ph medium is canna coco in 2gal smart pots. any help would be much appreciated.

 

[Jypsy Dog]

If it's LED you can up the temps to the 80's. Seems to help with up take of cal/mag.
Higher humidity during veg. 50/60%

 

[westcoast420]

Do you know how many ppm your feeding them total? And how often>?

 

[canadian blazer]

Do you know how many ppm your feeding them total? And how often>?

500ppm twice a day for 3 minutes using 500gph pump

 

[canadian blazer]

If it's LED you can up the temps to the 80's. Seems to help with up take of cal/mag.
Higher humidity during veg. 50/60%

its MH light i can increase the temp its usually around 79 ill try and keep the humidity up.

 

[canadian blazer]

starting to be more visible

 

[Jypsy Dog]

starting to be more visible

I'd start doing a folier feed with calmag and add Epsom @ 1 teas/gal in your feed. Some girls are pigs for the Mg. Most of mine are.

 

[canadian blazer]

I'd start doing a folier feed with calmag and add Epsom @ 1 teas/gal in your feed. Some girls are pigs for the Mg. Most of mine are.

thanks ! i thought it was an Mg excess i was gona back it off but my stems were still purple so i knew it needed more and then the spots started showing up so i was a bit confused. thanks again. ill be sure to get some epsome salt.

 

[Jypsy Dog]

Seems like a given when I run Maxibloom.
This Pineapple Express always wants a little more..

 

[canadian blazer]

seems to have helped

 

[Jypsy Dog]

seems to have helped

Healthy Looking.

 

[Jypsy Dog]

Think I'm caught up also.

 

[OneHitDone]

so today i checked in on my grow and noticed some leaves turing a rusty colour from inside of the fan leaves on my zkittlez glue plants. im not sure whats wrong. im growing in a 4x4 tent with 600w light. my lights on temp is 76°f and humidity is 40% i run a 100L resivoir with tap water (101 ppm) my nutes are GH i mixed 90ml of calmag 33ml of micro 33ml of grow and 20ml of bloom i also added 2 ml of superthrive and i have a bluelab ph doser thats set to 6.1ph medium is canna coco in 2gal smart pots. any help would be much appreciated.

Have you resolved this issue? I suspect a multi micro-nutrient issue.
Assuming this is GH Flora Series and you are using the correct Cal-mag (GH Cali-Magic) I would be interested in your feedback if you would try this mix on 100L res
Cali-magic 66ml Grow 53ml Micro 158ml Boom 211ml

Also, how frequently are you watering? Coco seems to be a real twat if it is not receiving irrigation to runoff at least once per day

 

[rkymtnman]

so today i checked in on my grow and noticed some leaves turing a rusty colour from inside of the fan leaves on my zkittlez glue plants. im not sure whats wrong. im growing in a 4x4 tent with 600w light. my lights on temp is 76°f and humidity is 40% i run a 100L resivoir with tap water (101 ppm) my nutes are GH i mixed 90ml of calmag 33ml of micro 33ml of grow and 20ml of bloom i also added 2 ml of superthrive and i have a bluelab ph doser thats set to 6.1ph medium is canna coco in 2gal smart pots. any help would be much appreciated.

since you have the flora series, you should give H3AD"s formula a try for coco. 6mL micro/9mL bloom + 1g/gal Epsom salts. It's a variation of the Lucas formula specificallly for Coco.