Samsung led strip on 600h-36b
- Thread starter SamWE19
- Start date
Sorry I thought hlg were standard
Edit my bad I just re-read my post and I didn’t include hlg in it
HLG-600H-MEAN WELL USA Switching Power Supply
MEAN WELL Switching Power Supply. MEAN WELL is a Switching Power Supply manufacturer in Taiwan. – SMPS, SPS manufacturer, AC DC , DC DC , DC AC, industrial power supply, Medical power supply, Din Rail power supply, LED power supply, LED driver, charger, inverter, adaptor, rack power, modular...
www.meanwellusa.com
Anyone ideas what this bit means then? It says constant current region and this one is 18-36
Attachments
Airwalker16
Well-Known Member
The voltage is 36. You want an HLG-600-24
What you look at is it's Amps OUTPUT. The divide that number with however many strips you want to use.
25amps on the HLG-600-24. So if you use 25 strips, they'll each receive 1amp(1,000ma)
50 strips, 0.5amps(500ma)
And so on...
What you look at is it's Amps OUTPUT. The divide that number with however many strips you want to use.
25amps on the HLG-600-24. So if you use 25 strips, they'll each receive 1amp(1,000ma)
50 strips, 0.5amps(500ma)
And so on...
I know that mate. I just have loads of hlg-600h-36b sitting not being used that I’d like to use for these strips.
If there is a way to wire the strips so that they get the current voltage?
Mak'er Grow
Well-Known Member
Put a meter on the output leads and adjust the trimmers. Check to see if you can get the output to your needed values. Don't forget under load the values will drop slightly.
If you can get them down to around 20 volts I'd hook up a strip and see what happens...lol
But then again I'm running some LEDS with a bridge rect and a few ceramic resistors atm...lol
If you can get them down to around 20 volts I'd hook up a strip and see what happens...lol
But then again I'm running some LEDS with a bridge rect and a few ceramic resistors atm...lol
There are no trimmers, only 3-in-1 external dimming.
MeanWell LED Drivers: 3 in 1 Dimming Function.
Quite a few led driver series from MeanWell, have the " 3 in 1 Dimming Function" : - LPF -NPF -HLN -HLP -HLG -HLG-C & -HBG . Reference / examle ,the HLP series:
www.rollitup.org
Do you know what it means by the voltage range in the photo I posted?
Is there a way to wire the leds to split the voltage up to make the work etc?
Are you sure about this? I don’t want to fry new strips. How does it work? Will it mean the driver outputs less than 600w?
coreywebster
Well-Known Member
So basically you would have 23v X 16.7amps not making full use of the driver (384w) but making use of it none the less..?
That's the way I always thought It worked with these drivers but im second guessing myself now.
A way to get more out of it would be to usea 12v strip in series parallel , like the 1ft Samsung Q series.
3 x 1ft strip per series then parallel the fuck out it.
That's the way I always thought It worked with these drivers but im second guessing myself now.
A way to get more out of it would be to usea 12v strip in series parallel , like the 1ft Samsung Q series.
3 x 1ft strip per series then parallel the fuck out it.
Never considered the Q series how do they compare to the f series?
coreywebster
Well-Known Member
To quote LED gardener.
"Samsung’s Q-Series uses the current top-dog of diodes: the LM301B. These diodes are rated at over 200 lumens per watt, vs. the 187 lumens per watt that the LM561C is rated for. The Q-Series strips are still quite new, and, as such, are more expensive than the H-Series and F-Series strips. They also have the lowest diode count per strip, which does matter in medium to large sized builds.
Opposite of the H-Series, the Q-Series strips all have the same max current, but the typical voltage across each length is different
LT-Q282A (20 Diodes, 4 Series x 5 Parallel, Voltage = ~12V, Max Current = 1,000mA)
3000K: SI-B8V051280US
3500K: SI-B8U051280US
4000K: SI-B8T051280US
5000K: SI-B8R051280US"
Yeh was just looking at them at digikey total cost sky rocketed using those
coreywebster
Well-Known Member
You know what might work here.
Bridgelux vesta series strips. They do something close to 36v I think.
@Rocket Soul would know about that
Bridgelux vesta series strips. They do something close to 36v I think.
@Rocket Soul would know about that