DIY with Quantum Boards

fragileassassin

Well-Known Member
No better place to use tents than a nice unfinished basement.
I really wanted to build out some rooms, but it just wasnt in the budget. It's a long term goal, but happy enough with my tents for now.
All the heat in the basement keeps my living room and kitchen floors warm so that's a nice positive of how it is now.
 

fragileassassin

Well-Known Member
Ok, I am thinking keeping it simple and doing something like this. Not shit in this to scale but this is what im seeing.
The blue rectangles are roughly the totes.
The heatsinks have open holes in each corner but not anywhere else. Would rather not have to dig out the drill press and drill 32 holes in heatsinks.
So i have been thinking about just using 2x4s and 2x2s. 2x4 down the middle then I can just scew 2x2s on to that that reach out to the corner holes. Already have the 2x2s.
Even with painting the wood, this seems like the simplest and cheapest way to do it with the tools I have.
setup.jpg
 

Airwalker16

Well-Known Member
Ok, I am thinking keeping it simple and doing something like this. Not shit in this to scale but this is what im seeing.
The blue rectangles are roughly the totes.
The heatsinks have open holes in each corner but not anywhere else. Would rather not have to dig out the drill press and drill 32 holes in heatsinks.
So i have been thinking about just using 2x4s and 2x2s. 2x4 down the middle then I can just scew 2x2s on to that that reach out to the corner holes. Already have the 2x2s.
Even with painting the wood, this seems like the simplest and cheapest way to do it with the tools I have.
View attachment 4440001
This is what you want to intimately do in your space?
 

fragileassassin

Well-Known Member
Yeah I'll be doing it soon. Need it done to flower.
I'll cut the current 12 site system in half and extend the pipes to center 6 sites in the tent. not changing the lighting too much I guess, mounting them vertically in the rows instead and bringing all the rows I have before in together but mounted different. My tracks sucked and this just kinda hit me tonight as a simple solution.
 

Airwalker16

Well-Known Member
Ok, I am thinking keeping it simple and doing something like this. Not shit in this to scale but this is what im seeing.
The blue rectangles are roughly the totes.
The heatsinks have open holes in each corner but not anywhere else. Would rather not have to dig out the drill press and drill 32 holes in heatsinks.
So i have been thinking about just using 2x4s and 2x2s. 2x4 down the middle then I can just scew 2x2s on to that that reach out to the corner holes. Already have the 2x2s.
Even with painting the wood, this seems like the simplest and cheapest way to do it with the tools I have.
View attachment 4440001
Gonna be a whole fuck ton of rope ratchets though at 64 for all 16 lights. Good thing they're dirt cheap.
 

fragileassassin

Well-Known Member
I had a tangle of them with the stupid tracks trying to keep them supported lol.
I'll probably just use 3 on each set. Thinking eye bolts at each and and the middle. Should be supportive enough.
 

2com

Well-Known Member
I'm interested in building a fixture with these boards. I live in Canada and I'm not sure where to start. Any links to suppliers would be great. Thanks guys. I've been outta the game for awhile.
Where to start if you're talking about HLG quantum boards would be "horticulturelightinggroup.com".

I am getting pretty even coverage. I can even lean into my canopy.. I love spanning a 4 foot space with triple lights. I bet I could even push it to 5 feet wide.
When I started with QBs, building kits for people etc., I just went with the idea of two (288s) oriented length end to end (like a 260w kit) but spaced apart some, aimed at a canopy width of about 4 to 4.5 feet. That was largely based on cost; cost of an extra board+heatsink per "fixture". But three is what I'd like to do, personally. It's like a blanket of even light for the standard 4 to 5 feet.
This is where being stuck with the driver you have (CC) can suck.

Looks like a good setup, dude.
 
Last edited:

2com

Well-Known Member
Aluminum angle is ok, but does anyone know an online retailer to buy 2020 aluminum extrusion lengths from (for canadians)? I haven't found one yet, and nothing local. Amazon has minimal offerings and not much over 800mm even then.
Thanks for anything, hah.
 

Frank Nitty

Well-Known Member
Ok, I am thinking keeping it simple and doing something like this. Not shit in this to scale but this is what im seeing.
The blue rectangles are roughly the totes.
The heatsinks have open holes in each corner but not anywhere else. Would rather not have to dig out the drill press and drill 32 holes in heatsinks.
So i have been thinking about just using 2x4s and 2x2s. 2x4 down the middle then I can just scew 2x2s on to that that reach out to the corner holes. Already have the 2x2s.
Even with painting the wood, this seems like the simplest and cheapest way to do it with the tools I have.
View attachment 4440001
Looking at this just made me decide to buy a house so I can do what I want in it!!!!
 

fragileassassin

Well-Known Member
Looking at this just made me decide to buy a house so I can do what I want in it!!!!
I packed up everything and moved to a legal state to grow for myself, a large part of the decision on which house we bought was how well it would work for a grow.
We ended up with nearly everything we wanted and a nearly perfect grow space. I have access to water and 2 drains including 1 in the floor. Eventually going to put a utility sink on the one next to my clone station. The heater being down there keeps it warmer in the winter and the air intake down there help with air circulation year round.
Only issue I had was all the outlets down there are on a single 15a breaker. Was fairly easy to solve with a controller box run back to the panel.
 

Airwalker16

Well-Known Member
Where to start if you're talking about HLG quantum boards would be "horticulturelightinggroup.com".
Dri

When I started with QBs, building kits for people etc., I just went with the idea of two (288s) oriented length end to end (like a 260w kit) but spaced apart some, aimed at a canopy width of about 4 to 4.5 feet. That was largely based on cost; cost of an extra board+heatsink per "fixture". But three is what I'd like to do, personally. It's like a blanket of even light for the standard 4 to 5 feet.
This is where being stuck with the driver you have (CC) can suck.

Looks like a good setup, dude.
CCs can be split in parallel. 2 boards usually used can be turned in to 4. 2 parallel strings of 2 in series
 

2com

Well-Known Member
You can add two 288s to a 240h-c2100 that's already driving two 288s just by wiring the two additional 288s in series with each other, and then wiring those two in parallel with the first/original two?

Is that what you're saying?
(Edit: also, I was saying three boards in a row is great, agreeing with daveybc. you're talking about four, right? just saying :) ).
 

daveybc

Well-Known Member
I was really happy I bought the 185h 54a as I ended up running 2 qb96e off each one instead of 1. I used a spare 185 54a to run 2 QB288 v1`2700k. The temperature of that driver is cooler to touch than the 240 c2100a at the same wattage, which runs 2 qb288 v1 3000k (figure that one out..). All my lights at about 3/4 power and I feel I could finish at this ( perhaps a little higher ). Having more lights running lighter, has really givin me the upper hand. THis is accumulated purchases of coarse.

I purchase my AA from "Metal Supermarkets" in Richmond BC. They have other stores and you can order online. I was told it was less expensive going to a store vs online ( perhaps its the shipping ). I paid about $30 cdn for a 20' 3/4 AA 1/8 thick. They have a scrap bin too that is sold by the lbs.

Where to start if you're talking about HLG quantum boards would be "horticulturelightinggroup.com".
Dri

When I started with QBs, building kits for people etc., I just went with the idea of two (288s) oriented length end to end (like a 260w kit) but spaced apart some, aimed at a canopy width of about 4 to 4.5 feet. That was largely based on cost; cost of an extra board+heatsink per "fixture". But three is what I'd like to do, personally. It's like a blanket of even light for the standard 4 to 5 feet.
This is where being stuck with the driver you have (CC) can suck.

Looks like a good setup, dude.
 

TWest65

Well-Known Member
You can add two 288s to a 240h-c2100 that's already driving two 288s just by wiring the two additional 288s in series with each other, and then wiring those two in parallel with the first/original two?

Is that what you're saying?
(Edit: also, I was saying three boards in a row is great, agreeing with daveybc. you're talking about four, right? just saying :) ).
Yes, but the trade-off is, each 1/2 of the parallel ckt gets 1/2 the current. So only 1050ma through each of the 4 boards, instead of 2100ma through 2 boards
 

The Loafter

Well-Known Member
You can mix 4 boards 2 being new 2 old ( varying voltage) by mixing and old and new In series and repeating the same with the other two, then parallel the sets. Better than adding two new in series parallel to two old in series.
 
Top