Can it be to much light

[Mr11]

Hi!
Last week had 1250 wats. One platinum led (250w) and 1000w bloomspec. before that only the bloomspec.
Last Week with 2 lights it seems the plant started to burn. now the bloom spec got removed. Actual only platimun led(1 day ago).
i would like to confirm that my problem
Was to much light and heat. Max heat with two lights 33c. Grow space 1m. lamp hight from canopy 24” . Strain jack herer. Grow time 75 days. Bag of co2 next to plant

 

[spek9]

It's not light, it's likely heat. 33C (91.4F) is high.

Your "1000W" light only draws 182W from the wall, so I suspect that your "250W" is below 60W draw, so in reality, you've got less than 250W in total for light.

 

[Mr11]

It's not light, it's likely heat. 33C (91.4F) is high.

Your "1000W" light only draws 182W from the wall, so I suspect that your "250W" is below 60W draw, so in reality, you've got less than 250W in total for light.

thanks for replay, with only the $250 does not go above 30c

should I be good with 250w?

 

[Couch_buzz]

Co2 bag in a small tent is a waste of money, worthless.

91 Fahrenheit is a bit hot, increase exhaust fan CFM........and lift the lights up a bit.

 

[twalte]

should I be good with 250w?

I’d say you are a little underpowered. With high end LEDs, they normally target 30-35 watts (from the wall....not “claimed” watts) per square foot of space that you are lighting. So if you are lighting a 3x3 foot tent, that’s 9 square feet. You’d want a minimum of 270 watts....with more being better.

 

[bulla]

I don't think its light I thik its heat at 91 degrees i'd drop that way down . I run a lot of lights I don't ever seem to have a problem with light but with heat ...

 

[Mr11]

I’d say you are a little underpowered. With high end LEDs, they normally target 30-35 watts (from the wall....not “claimed” watts) per square foot of space that you are lighting. So if you are lighting a 3x3 foot tent, that’s 9 square feet. You’d want a minimum of 270 watts....with more being better.

thanks