OzyM8
Well-Known Member
Not a comp. It’s a play on words. Look them up. You might get a chuckle.is this a grow size comp? Aussie mate wins
Not a comp. It’s a play on words. Look them up. You might get a chuckle.is this a grow size comp? Aussie mate wins
just the one shed? ya not thinking big enoughNow this is a man cave...
View attachment 4499825View attachment 4499826
Although i wouldn be wastin me time with the blurples.
Is that a current culture setup?Now this is a man cave...
View attachment 4499825View attachment 4499826
Although i wouldn be wastin me time with the blurples.
Your guess is as good as mine unfortunately. And there’s still 4 more to pot up.Whats the plan?
I like it, i mean i really like itNow this is a man cave...
View attachment 4499825View attachment 4499826
Although i wouldn be wastin me time with the blurples.
Yea man. There a nice bit of equipment aye but got a large price tag on them. Id be buildin me own rdwc setup an puttin the saved money into invorment controls an lightingIs that a current culture setup?
The yanks have got it good, be great if we didn have to worry about the pigs rippin our grow rooms apart. If only i could sound proof me old shed so know one would know what i was upto in there.I like it, i mean i really like it
I do caps with larf same way @Rewerb does his but I decarb first. Honestly never tried not decarbing but I will next time.How long you blokes cook for when doung caps.
Thats the way enviroment is the biggest factor that most growers over look thats a clean ass setup good shitYea man. There a nice bit of equipment aye but got a large price tag on them. Id be buildin me own rdwc setup an puttin the saved money into invorment controls an lighting
Whatta ya mean im talkin like i set it up for some one?isnt that your setup jumy,
you talking like you set it up for someone,,he this n that
im doing that next week settin up someones grow and i havent even finished my set up yet
RO water =0EC + calmag .4. + nute EC = total EC’s listed.What’s your setup in terms of
size: 4x4
medium: coco
nutes: full line of hygen coco with bud candy and mammoth
lights: 600hps in a cool tube and 2 240w cob’s
enviro controls: co2 controller, rh controller, temp controller
and equipment: automatic air dampers that control the sealing of the room, oscillating fan, fans at ground level to redistribute co2, ultrasonic mister for rh control
RO water =0EC + calmag .4. + nute EC = total EC’s listed.
Total air exchange every 2 hours lights on, that should take no longer than 3 mins if intake and exhaust sized correctly. Long air exchange at lights out to vent co2, bring in o2 and deal with RH from transpiration, approx 15 mins. Air exchange every 2 hours lights out.
During veg I’ll do a -3C drop in temp lights out.
During stretch only 1C drop in temp lights out.
Up until 2 weeks to go I’ll drop -3C, then last two weeks reduce temps as not running elevated co2 either. This allows flower to finish, keeping high co2 towards end will inhibit finish.
Reduce RH at lights also, in line with lights out temps - VPD, ie if lights out temp is 24C Rh would be 45-47% in flower.
Ive not used that nute line. I use canna and below is the run for anything from an 8-12 or so week strain from flip.
I’ll include veg too if that helps.
VEG:
Newly rooted clone transplanted out (I clone at 26C).
Week 1: temp 26C, RH 68-70, 1.1EC, co2 450ppm, PPFD 400
Week 2 temp 28C RH 68-70, 1.3EC, co2 600ppm, PPFD 500
Weeks beyond in veg, temp 28, RH 66-68, 1.5EC, co2 800ppm, PPFD 600.
FLOWER: change to 12/12.
Stretch 2-4 weeks, temp 28C, RH 62-64, 1.7EC, co2 600ppm, PPFD 750
2-3 weeks of, temp 28-30C, RH 60-62, 2.0EC, co2 1200-1400, PPFD 900-950.
During the 4th week to go, I.e 3 weeks left after this week finishes, same as above with pk boost added for a 2.2EC, only run this for one week.
For 1 week, temp 28-30C, RH 60-62, 1.6EC, co2 1200-1400, PPFD 900-950.
2 weeks or so to go, for 1st week, 26C, Rh 50-52, 1.6EC, co2 600ppm, PPFD 800
2nd week, 24C, RH 45,
Damn you guys goin all out with the sealed room setups thats killerRO water =0EC + calmag .4. + nute EC = total EC’s listed.
Total air exchange every 2 hours lights on, that should take no longer than 3 mins if intake and exhaust sized correctly. Long air exchange at lights out to vent co2, bring in o2 and deal with RH from transpiration, approx 15 mins. Air exchange every 2 hours lights out.
During veg I’ll do a -3C drop in temp lights out.
During stretch only 1C drop in temp lights out.
Up until 2 weeks to go I’ll drop -3C, then last two weeks reduce temps as not running elevated co2 either. This allows flower to finish, keeping high co2 towards end will inhibit finish.
Reduce RH at lights also, in line with lights out temps - VPD, ie if lights out temp is 24C Rh would be 45-47% in flower.
Ive not used that nute line. I use canna and below is the run for anything from an 8-12 or so week strain from flip.
I’ll include veg too if that helps.
VEG:
Newly rooted clone transplanted out (I clone at 26C).
Week 1: temp 26C, RH 68-70, 1.1EC, co2 450ppm, PPFD 400
Week 2 temp 28C RH 68-70, 1.3EC, co2 600ppm, PPFD 500
Weeks beyond in veg, temp 28, RH 66-68, 1.5EC, co2 800ppm, PPFD 600.
FLOWER: change to 12/12.
Stretch 2-4 weeks, temp 28C, RH 62-64, 1.7EC, co2 600ppm, PPFD 750
2-3 weeks of, temp 28-30C, RH 60-62, 2.0EC, co2 1200-1400, PPFD 900-950.
During the 4th week to go, I.e 3 weeks left after this week finishes, same as above with pk boost added for a 2.2EC, only run this for one week.
For 1 week, temp 28-30C, RH 60-62, 1.6EC, co2 1200-1400, PPFD 900-950.
2 weeks or so to go, for 1st week, 26C, Rh 50-52, 1.6EC, co2 600ppm, PPFD 800
2nd week, 24C, RH 45, 1.6EC, co2 500ppm, PPFD 800
Last week, 24C, RH 45, 1.6EC, o2 450ppm, PPFD 600
This is a debated one, however I then run 48 hours of lights out, temp 18C, RH 30%, water only 0EC.
Above has served me well across most indica / hybrid strains. I have 100% control over all enviro conditions. Quick pic of my setup.
View attachment 4499856
12 hrs on a surface except for 6 i think on stainless steel
How many caps would the average nice oz make ? Is there a bit of a benchmark ?I don't decarb before cooking. I'll grind the gear into small bits & place the solids into a jar of warmed-up (ie. liquid) coconut oil & make sure everything is fully soaked & homogenous. Adding a bit of Lecethin granules at this point helps the gubbins get absorbed by your digestive system faster (if that's what you want to achieve - I prefer a slower onset & longer cruise, but your mileage may vary.....).
The whole thing then goes into a pressure cooker on a trivet with sufficient water to process & brought to pressure, then left at 120C for 30-40 mins.
This way, you get decarboxylation & infusion in a single step.
De-pressurise (CAREFULLY!), allow to cool a bit, then strain all the solids out through a coffee filter in a funnel into another jar.
Package in your capsule machine (you DO have one, right?), then spread them out on a lined baking tray & freeze them before transfer to storage in the fridge.
If you don't keep them separated before storage & refrigerated, they'll just clump together & end-up a nasty mess.
At least you’ve got plants in pots Venus. Where there’s a will there’s a wayYour guess is as good as mine unfortunately. And there’s still 4 more to pot up.
I’m thinking they’re gonna be outdoors maybe the whole way supplementing the 18hrs with nothing more than a spotty like I’ve done before. But I definitely won’t be able to keep all ten sooo, not really sure ...