Aussie Growers Thread

bursto

bursto

Well-Known Member
im gonna be pissed and amazed the day someone new or whatever joins and post a pic of their room, and its better than Aussiemates

i mean an Aussie grower,

his room would be just a normal room in the states, but here its like:clap:
 
Last edited:
Venus55

Venus55

Well-Known Member
Lucky Luke said:
Whats the plan?
Click to expand...
Your guess is as good as mine unfortunately. And there’s still 4 more to pot up.
I’m thinking they’re gonna be outdoors maybe the whole way supplementing the 18hrs with nothing more than a spotty like I’ve done before. But I definitely won’t be able to keep all ten sooo, not really sure ...
 
bursto

bursto

Well-Known Member
isnt that your setup jumy,


you talking like you set it up for someone,,he this n that

im doing that next week settin up someones grow and i havent even finished my set up yet :wall:
 
Last edited:
klx

klx

Well-Known Member
jzs147 said:
How long you blokes cook for when doung caps.
Click to expand...
I do caps with larf same way @Rewerb does his but I decarb first. Honestly never tried not decarbing but I will next time.

If I take the time to make oil I take the time to decarb then do 2 slow cooks in the oven then freeze, then thaw and one more cook. Then straight into caps no straining. Kaboom.
 
JimyTheCook

JimyTheCook

Well-Known Member
bursto said:
isnt that your setup jumy,


you talking like you set it up for someone,,he this n that

im doing that next week settin up someones grow and i havent even finished my set up yet :wall:
Click to expand...
Whatta ya mean im talkin like i set it up for some one?
I posted pics an replied to cpl people about it.

If someone was handing out the dollars id have a crack at settin somethin up but id rather put time into havin my own setup on the go.
 
OzyM8

OzyM8

Well-Known Member
Lukeqc said:
What’s your setup in terms of
size: 4x4
medium: coco
nutes: full line of hygen coco with bud candy and mammoth
lights: 600hps in a cool tube and 2 240w cob’s
enviro controls: co2 controller, rh controller, temp controller
and equipment: automatic air dampers that control the sealing of the room, oscillating fan, fans at ground level to redistribute co2, ultrasonic mister for rh control
Click to expand...
RO water =0EC + calmag .4. + nute EC = total EC’s listed.
Total air exchange every 2 hours lights on, that should take no longer than 3 mins if intake and exhaust sized correctly. Long air exchange at lights out to vent co2, bring in o2 and deal with RH from transpiration, approx 15 mins. Air exchange every 2 hours lights out.
During veg I’ll do a -3C drop in temp lights out.
During stretch only 1C drop in temp lights out.
Up until 2 weeks to go I’ll drop -3C, then last two weeks reduce temps as not running elevated co2 either. This allows flower to finish, keeping high co2 towards end will inhibit finish.
Reduce RH at lights out also, in line with lights out temps - VPD, ie if lights out temp is 24C Rh would be 45-47% in flower.

Ive not used that nute line. I use canna and below is the run for anything from an 8-12 or so week strain from flip.
I’ll include veg too if that helps.

VEG:
Newly rooted clone transplanted out (I clone at 26C).
Week 1: temp 26C, RH 68-70, 1.1EC, co2 450ppm, PPFD 400
Week 2 temp 28C RH 68-70, 1.3EC, co2 600ppm, PPFD 500
Weeks beyond in veg, temp 28, RH 66-68, 1.5EC, co2 800ppm, PPFD 600.

FLOWER: change to 12/12.
Stretch 2-4 weeks, temp 28C, RH 62-64, 1.7EC, co2 600ppm, PPFD 800
2-3 weeks of, temp 28-30C, RH 60-62, 2.0EC, co2 1200-1400, PPFD 900-950.
During the 4th week to go, I.e 3 weeks left after this week finishes, same as above with pk boost added for a 2.2EC, only run this for one week.
For 1 week, temp 28-30C, RH 60-62, 1.6EC, co2 1200-1400, PPFD 900-950.
2 weeks or so to go, for 1st week, 26C, Rh 50-52, 1.6EC, co2 600ppm, PPFD 800
2nd week, 24C, RH 45, 1.6EC, co2 500ppm, PPFD 800
Last week, 24C, RH 45, 1.6EC, co2 450ppm, PPFD 600

This is a debated one, however I then run 48 hours of lights out, temp 18C, RH 30%, water only 0EC.

Above has served me well across most indica / hybrid strains. I have 100% control over all enviro conditions via an IntelliClimate system .
 
Last edited:
Bullygrowz

Bullygrowz

Well-Known Member
OzyM8 said:
RO water =0EC + calmag .4. + nute EC = total EC’s listed.
Total air exchange every 2 hours lights on, that should take no longer than 3 mins if intake and exhaust sized correctly. Long air exchange at lights out to vent co2, bring in o2 and deal with RH from transpiration, approx 15 mins. Air exchange every 2 hours lights out.
During veg I’ll do a -3C drop in temp lights out.
During stretch only 1C drop in temp lights out.
Up until 2 weeks to go I’ll drop -3C, then last two weeks reduce temps as not running elevated co2 either. This allows flower to finish, keeping high co2 towards end will inhibit finish.
Reduce RH at lights also, in line with lights out temps - VPD, ie if lights out temp is 24C Rh would be 45-47% in flower.

Ive not used that nute line. I use canna and below is the run for anything from an 8-12 or so week strain from flip.
I’ll include veg too if that helps.

VEG:
Newly rooted clone transplanted out (I clone at 26C).
Week 1: temp 26C, RH 68-70, 1.1EC, co2 450ppm, PPFD 400
Week 2 temp 28C RH 68-70, 1.3EC, co2 600ppm, PPFD 500
Weeks beyond in veg, temp 28, RH 66-68, 1.5EC, co2 800ppm, PPFD 600.

FLOWER: change to 12/12.
Stretch 2-4 weeks, temp 28C, RH 62-64, 1.7EC, co2 600ppm, PPFD 750
2-3 weeks of, temp 28-30C, RH 60-62, 2.0EC, co2 1200-1400, PPFD 900-950.
During the 4th week to go, I.e 3 weeks left after this week finishes, same as above with pk boost added for a 2.2EC, only run this for one week.
For 1 week, temp 28-30C, RH 60-62, 1.6EC, co2 1200-1400, PPFD 900-950.
2 weeks or so to go, for 1st week, 26C, Rh 50-52, 1.6EC, co2 600ppm, PPFD 800
2nd week, 24C, RH 45,
Click to expand...
OzyM8 said:
RO water =0EC + calmag .4. + nute EC = total EC’s listed.
Total air exchange every 2 hours lights on, that should take no longer than 3 mins if intake and exhaust sized correctly. Long air exchange at lights out to vent co2, bring in o2 and deal with RH from transpiration, approx 15 mins. Air exchange every 2 hours lights out.
During veg I’ll do a -3C drop in temp lights out.
During stretch only 1C drop in temp lights out.
Up until 2 weeks to go I’ll drop -3C, then last two weeks reduce temps as not running elevated co2 either. This allows flower to finish, keeping high co2 towards end will inhibit finish.
Reduce RH at lights also, in line with lights out temps - VPD, ie if lights out temp is 24C Rh would be 45-47% in flower.

Ive not used that nute line. I use canna and below is the run for anything from an 8-12 or so week strain from flip.
I’ll include veg too if that helps.

VEG:
Newly rooted clone transplanted out (I clone at 26C).
Week 1: temp 26C, RH 68-70, 1.1EC, co2 450ppm, PPFD 400
Week 2 temp 28C RH 68-70, 1.3EC, co2 600ppm, PPFD 500
Weeks beyond in veg, temp 28, RH 66-68, 1.5EC, co2 800ppm, PPFD 600.

FLOWER: change to 12/12.
Stretch 2-4 weeks, temp 28C, RH 62-64, 1.7EC, co2 600ppm, PPFD 750
2-3 weeks of, temp 28-30C, RH 60-62, 2.0EC, co2 1200-1400, PPFD 900-950.
During the 4th week to go, I.e 3 weeks left after this week finishes, same as above with pk boost added for a 2.2EC, only run this for one week.
For 1 week, temp 28-30C, RH 60-62, 1.6EC, co2 1200-1400, PPFD 900-950.
2 weeks or so to go, for 1st week, 26C, Rh 50-52, 1.6EC, co2 600ppm, PPFD 800
2nd week, 24C, RH 45, 1.6EC, co2 500ppm, PPFD 800
Last week, 24C, RH 45, 1.6EC, o2 450ppm, PPFD 600

This is a debated one, however I then run 48 hours of lights out, temp 18C, RH 30%, water only 0EC.

Above has served me well across most indica / hybrid strains. I have 100% control over all enviro conditions. Quick pic of my setup.

View attachment 4499856
Click to expand...
Damn you guys goin all out with the sealed room setups thats killer
 
B

beernutz

Well-Known Member
Lucky Luke said:
12 hrs on a surface except for 6 i think on stainless steel
Click to expand...
Rewerb said:
I don't decarb before cooking. I'll grind the gear into small bits & place the solids into a jar of warmed-up (ie. liquid) coconut oil & make sure everything is fully soaked & homogenous. Adding a bit of Lecethin granules at this point helps the gubbins get absorbed by your digestive system faster (if that's what you want to achieve - I prefer a slower onset & longer cruise, but your mileage may vary.....).

The whole thing then goes into a pressure cooker on a trivet with sufficient water to process & brought to pressure, then left at 120C for 30-40 mins.

This way, you get decarboxylation & infusion in a single step.

De-pressurise (CAREFULLY!), allow to cool a bit, then strain all the solids out through a coffee filter in a funnel into another jar.

Package in your capsule machine (you DO have one, right?), then spread them out on a lined baking tray & freeze them before transfer to storage in the fridge.

If you don't keep them separated before storage & refrigerated, they'll just clump together & end-up a nasty mess.
Click to expand...
How many caps would the average nice oz make ? Is there a bit of a benchmark ?
 
OzyM8

OzyM8

Well-Known Member
Venus55 said:
Your guess is as good as mine unfortunately. And there’s still 4 more to pot up.
I’m thinking they’re gonna be outdoors maybe the whole way supplementing the 18hrs with nothing more than a spotty like I’ve done before. But I definitely won’t be able to keep all ten sooo, not really sure ...
Click to expand...
At least you’ve got plants in pots Venus. Where there’s a will there’s a way :peace:
 
You must log in or register to reply here.
Top