Negative pressure

Ty5594

New Member
So my tent is pulling the walls in when I have the exhaust/filter on, no intake, and I have a 3x3x6 with a 6” exhaust/filter set up. If I open the vents I’m good but face the problem of my humidity dropping to low due to the air coming in. I’m running a humidifier already. Any ideas?
 

Wattzzup

Well-Known Member
So my tent is pulling the walls in when I have the exhaust/filter on, no intake, and I have a 3x3x6 with a 6” exhaust/filter set up. If I open the vents I’m good but face the problem of my humidity dropping to low due to the air coming in. I’m running a humidifier already. Any ideas?
From what I’ve read your tent should suck in a little since it’s pulling air from outside sucking in

mine does this as my filter and exhaust fan are both inside the tent
 
Last edited:

lee1000

Well-Known Member
Your tent should be exchanging air, not necessarily pulling all the air out of the tent for it to show negative pressure. You can get the same desired affect by adding an air intake of a lesser power as the outtake thus exchanging air more efficiently
 

Boatguy

Well-Known Member
So my tent is pulling the walls in when I have the exhaust/filter on, no intake, and I have a 3x3x6 with a 6” exhaust/filter set up. If I open the vents I’m good but face the problem of my humidity dropping to low due to the air coming in. I’m running a humidifier already. Any ideas?
Its pretty easy to manage humidity by controlling temp. My highest is when i allow the tent to get to the low 80' s, in flower I keep my temps in the mid to low 70's to get the humidity down. Not ideal but it works in my situation.
The main downsides to this is the exhaust isnt running 24/7 so some odor does escape, and humidity spikes at lights out.
I keep the intake flap open as well
 
follow VPD and you'll be ok. consider a 3 amp variac for your exhaust fan, dont get a cheap $15 speed controller.
 
Top