Samsung F Strip Build

TreeFarmerCharlie

TreeFarmerCharlie

Well-Known Member
My drivers and the one available strip from my order should be here by Thursday, but the remaining 7 strips that were back-ordered is showing an estimated ship date of May 12th. :wall:

At least I will have one strip to use for all my measurements to get the frames built, pre-wired, and drilled/tapped so it's all ready when they arrive.
 
ANC

ANC

Well-Known Member
TreeFarmerCharlie said:
My drivers and the one available strip from my order should be here by Thursday, but the remaining 7 strips that were back-ordered is showing an estimated ship date of May 12th. :wall:

At least I will have one strip to use for all my measurements to get the frames built, pre-wired, and drilled/tapped so it's all ready when they arrive.
Click to expand...
If those are Digikey dates, I wouldn't get my hopes too high.

They are a good company (I scored 5x 320W drivers today due to their mistake), but their restock dates tend to be a little optimistic.
 
TreeFarmerCharlie

TreeFarmerCharlie

Well-Known Member
ANC said:
If those are Digikey dates, I wouldn't get my hopes too high.

They are a good company (I scored 5x 320W drivers today due to their mistake), but their restock dates tend to be a little optimistic.
Click to expand...
Yeah, it's from DigiKey. I'm not getting my hopes up, especially with all the issues being caused by the pandemic. I was hoping to have them built before my next group of plants enter the flower cycle, but it really isn't a big deal if I have to wait for one more grow cycle, or swap them out mid cycle to use them. I've been growing under cheap Chinese COB LEDs from Amazon for 2 years...whats another few months, right?
 
M

maddmango

Well-Known Member
ANC said:
If those are Digikey dates, I wouldn't get my hopes too high.

They are a good company (I scored 5x 320W drivers today due to their mistake), but their restock dates tend to be a little optimistic.
Click to expand...
what was the mistake?
 
Phat J

Phat J

Well-Known Member
Screenshot_20200408-090310_Chrome.jpg
So if I was going to do a build with 10 of the 3500k 4ft Samsung strips, what drivers would you guys suggest? I am thinking HLG-480H-48A, going on what iPerculate suggested previously. This would be my first build.
iPerculate said:
I would recommend diy strips any day if you have the capability.

The less power that you run each strip, the more efficient and cooler they run. It's always better to run more strips at lower power if possible, with additional benefit of more light spread.

That being said I think 10 strips on a meanwell 480 would be better. Also as I mentioned earlier the XLG lineup from meanwell is priced cheaper, so you could use 2 of XLG-240-H-AB running 5 strips each. There is also the LRS-200-48, or the mack daddy HLG-480h-48A
Click to expand...
 
dannykay

dannykay

Well-Known Member
Phat J said:
View attachment 4527217
So if I was going to do a build with 10 of the 3500k 4ft Samsung strips, what drivers would you guys suggest? I am thinking HLG-480H-48A, going on what iPerculate suggested previously. This would be my first build.
Click to expand...
Current - Test2.24A
Temperature - Test65°C
Voltage - Forward (Vf) (Typ)46V
Lumens/Watt @ Current - Test171 lm/W
Current - Max3.6A


Hlg-480h-48, has 10a, which would run each strips on 1a, for 48w each, parallel wiring.
A series for built on pot, B for external.

Theres the xlg line up that was mentioned here as well, don't have experience with those so can't recommend.
 
Phat J

Phat J

Well-Known Member
dannykay said:
Current - Test2.24A
Temperature - Test65°C
Voltage - Forward (Vf) (Typ)46V
Lumens/Watt @ Current - Test171 lm/W
Current - Max3.6A

Hlg-480h-48, has 10a, which would run each strips on 1a, for 48w each, parallel wiring.
A series for built on pot, B for external.

Theres the xlg line up that was mentioned here as well, don't have experience with those so can't recommend.
Click to expand...
Ok, so trying to run 2 of the 480's with 5 strips per driver would be overkill? I should just stick with 2 of the aforementioned XLG-240H-AB?
 
H2OBO

H2OBO

Well-Known Member
dannykay said:
Don't think that 5 on a 480 driver is a overkill. The max tested current on those strips is 3.6a, with 5 strips, each will run on 2a, well below their max tested current.
Click to expand...
5 strips on 480a is what im waiting on parts for. Actually was only able to nab the 2’ lengths from digi , so got 10. Heatsinksusa says Michigan SAH order will keep my order from shipping until earliest 14th
 
G

Gullett79

Active Member
Well, I think I really screwed up by waiting to place an order with Arrow. I was going to grab up 20 or so of the 2 ft Samsung strips at less than 5 each, but after a couple comments I saw on here, decided to think about the more expensive 4 ft single and double row strips that are out of stock. Went back this morning to go ahead and get the 2 footers and bam, they're now priced at almost 30 apiece. So now I'm considering looking into the Bridgelux options. Anyone have any suggestions? Would really like to hit about 40w per ft in my 2.5 x 5 space without killing the wallet, which i could've done if I hadn't had second thoughts on the 2 footers.
 
Barristan Whitebeard

Barristan Whitebeard

Well-Known Member
Gullett79 said:
Well, I think I really screwed up by waiting to place an order with Arrow. I was going to grab up 20 or so of the 2 ft Samsung strips at less than 5 each, but after a couple comments I saw on here, decided to think about the more expensive 4 ft single and double row strips that are out of stock. Went back this morning to go ahead and get the 2 footers and bam, they're now priced at almost 30 apiece. So now I'm considering looking into the Bridgelux options. Anyone have any suggestions? Would really like to hit about 40w per ft in my 2.5 x 5 space without killing the wallet, which i could've done if I hadn't had second thoughts on the 2 footers.
Click to expand...
Are you referring to the 2 foot, 96 diode strips that are made with LM301A LED's?

The price of those strips have been fluctuating a lot recently, especially at Arrow and Verical, an Arrow subsidiary.

BTW I just checked the price of those strips, and they are $5.97 each at Arrow.
 
iPerculate

iPerculate

Well-Known Member
G

Gullett79

Active Member
Barristan Whitebeard said:
Are you referring to the 2 foot, 96 diode strips that are made with LM301A LED's?

The price of those strips have been fluctuating a lot recently, especially at Arrow and Verical, an Arrow subsidiary.

BTW I just checked the price of those strips, and they are $5.97 each at Arrow.
Click to expand...
I was talking about the SL-B8V7N90L1WW. They were 4.92 yesterday and now they're showing at 29.42 when I pull them up.
 
You must log in or register to reply here.
Top