12 Sanlight Q6w - Dinafem Critical plus 2.0

[DirtDiver007]

Hey guys
This is my new project

2x 1.2m cultibox connected x2 - 5.76m2
6x Sanlight q6w x2 - 12 pieces - cca. 2600W
24 plants x2
4:1 coco perlit mix
3l pots - wanted to use air pots but wasn't available
800m3/ vents inline centrifugal exhaust fan with appropriate can lite activated carbon filter
2 sound supressor
2000l/h neptun hydro irrigation pump
drain to waste

ro water
cal15
mg10
plagron coco line
Aptus start booster
Aptus regulator
pk 13/14
plagron green sensation
shooting powder

just finished with the set up. temp around 22-24c
rh 60%+

 

[DirtDiver007]

ready to flip 12/12 from now on.

 

[DirtDiver007]

9th day of flower - 1day after cutting & organizing
Ec 2.30mS/cm
Tds 1.15
Gotta love the sanlight.
Last pic 3week old whitewidow&critical 2.0 BHO

 

[DirtDiver007]

Hey guys, I did a second strip at the 15th DayofFlower, the canopy was so dense it was actually dark at the bottom.
The first 2 pictures were made that day, the rest is today the 18th DoF.
The feed is 0.25ml ca/mg+0.15ml regulator + 2.5ml Coco a&b + 1ml PK13/14/L
Ec 2.45

 

[DirtDiver007]

Hey guys
Everything is as planned. I'm using new tables this run a bit higher than before. I'm at Max height now. Sunday I need to rearrange a few girls coy they are too high, gonna out the next to the walls out of direct light. They were 5-8cm from the lights, but only a slight bleeching is present no real burn, this is very nice since i only used 1000w hps the last few years and this wasn't been the case if they got too close
3,5ml Coco a&b - 1ml plagron green sensation/L

25th day of flower

 

[DirtDiver007]

Day 29 of flower
streching stoped, but they gone higher than id like.ginna strip some leave Sunday to improve air flow, the girls look fabulous the pictures doesn't do right by them. I'm very interested to see the closing numbers, they have nice flowers much lower then expected. Well see for sure in a few weeks.

 

[DirtDiver007]

A little side project, sadly in my country the only readily available extraction kit is the original honey bee extractor, that didn't uses any mesh but still gives a quite enjoyable product. I'll try to get the California extracts tube but it's not easy and I don't want to order it because of safety concerns.

 

[Rocket Soul]

Subbed

 

[Mellow old School]

Very nice setup mate, shall follow...

 

[DirtDiver007]

Thanks guys, I was starting to be a tad lethargic coz of the lack of interest about my lil project
The clones to start the next 2 boxes are on the way, I now thinking about to use less lamp for it, since I realised that using 3 of them in a 120x120 is maybe a bit of overkill because the shop i bought them from started selling them in a set by 1lamp using the same tent and sanlight recommends 1 q6w for 1sqm and I'm using 6 in 2.88sqm.

 

[DirtDiver007]

Day 32 of flower.
I cut back a little on the cal mag, 0.17 ml of both achieving 0.4 ec.
0.17ml/cal15-0.17 ml/mg10 + 3.5ml coco a&b + 1ml green sensation+0.25ml aptus system clean
Ec 2.55
Ph 5. 9
I brought a few additional pics of the setup
+ the new clones and the cut back mothers.

 

[DirtDiver007]

#1 Pic light bleeched top, no burn..

 

[DirtDiver007]

BHO made entirely of old, dry, packaged trimm - 1.0g freezed and balled up

 

[DirtDiver007]

Hey guys, getting ready for harvest. Took down 10cm from the trays, reorganized the garden and removed the most of the fan leaves. Day 38 of flower, I decided to skip the shooting powder, so I'm only giving the basic fertilizer and the green sensation until 4 days before harvest from then they will get florakleen until the cut.

Ph 6.0
Ec 2.65

 

[DirtDiver007]

Hey guys
I brought a few close ups of the flowers. I replanted the mothers to 12L air pots - after more than 2 months in the 3L. The root system was quite unbelievable. Gotta love them air-pots

 

[DirtDiver007]

Hey guys
Had only one of the really early finishing criticals so I harvested it today. No pictures coz my phone wasn't been around...
But I made my first run with making bho with freshly frozen trimm and boy it's amazing. So I proudly present the 1st try of this gold. I did only a small dab before coming to write this and f**k, This is the shit.

Last picture the dark bho is made from shitty few month old weed from a deflected plant that was pust aside for months, I decided to make it this way, it yielded about 3.5g oil from 35g powder dry weed, it tastes almost nothing but still quit potent. No real smell though so stealth all the way

 

[DirtDiver007]

1st bud of the harvest

 

[DirtDiver007]

Hey guys
Summary of this run
CCA 1200w - harvested 1827g dry weight cca 915 g per table under 6 q6w, this was the first run with this set-up. I'm absolutely amazed by these lights. Highly recommend it.

Some bubbles hash ring 73micron, ball 25 mics. On the right side bho after giving a double boiler treatment for who knows how many hours stirring it time to time and using the silicon container for making vacuum while cooking it.

 

[Madmungo]

Hey guys
Summary of this run
CCA 1200w - harvested 1827g dry weight cca 915 g per table under 6 q6w, this was the first run with this set-up. I'm absolutely amazed by these lights. Highly recommend it.

Some bubbles hash ring 73micron, ball 25 mics. On the right side bho after giving a double boiler treatment for who knows how many hours stirring it time to time and using the silicon container for making vacuum while cooking it.

Well done mate,
Looks like you had a fantastic result, I see sanlight only recommend 2 of the lights per 4x4 space.