Why won't the 1000hps make a difference?You going from 16 sq ft to 25 sq ft, so (25/16)x14 = 21.87 oz
Ignore the lights. They wont make squat difference.
What that mean?
I think he means that both lights give about the same intensity in that space. 1000w/25sqft= 40watts per square feet. 600w/16sqft=37.5 watts per square foot.Why won't the 1000hps make a difference?
Exactly. Plus, even moderate changes in watts/sq ft are very minor compared to changes in total sq ft, or number of plants or correct PH or good temp range, humidity control, etc etc. Growing techniques far outweigh lights as far as effect on yields.I think he means that both lights give about the same intensity in that space. 1000w/25sqft= 40watts per square feet. 600w/16sqft=37.5 watts per square foot.
if you improve your growing, 1 gram per watt under HPS is easily doable. so you should be getting closer to 21 zips under the 600Say I'm getting 14ozs in the 4x4 tent under a 600 hps
I wouldn't say 1 gram per watt is easily doable, I'm not sure anyone else would say that either... I can get .75 with a good yielding strain.get
if you improve your growing, 1 gram per watt under HPS is easily doable. so you should be getting closer to 21 zips under the 600
I should change out my 600 to a 1000 in 1 tent. My tents are only 6 feet tall bc my basement isn't that tall. How many more inches do you usually have to keep a 1000 watt away from the canopy compared to a 600 watt..
300 grams to 600 grams under the 600w, 500 grams to 1000 grmas under the 1000w. Depending on grower skill.
Here's a video of a 600 watt and 1000 watt LED from the same manufacturer. They produced in proportion to the wattage:
<iframe width="560" height="315" src="" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
.
Need about 8" minimum under my 1000's. (Edit...se. air cooled hoods.)I should change out my 600 to a 1000 in 1 tent. My tents are only 6 feet tall bc my basement isn't that tall. How many more inches do you usually have to keep a 1000 watt away from the canopy compared to a 600 watt.
Im not how to optimize it any more.... The plants I'm growing in the 4x4 are bad yielders.. Like I said above I when from 2 topped plants to 4 normal grown plants, I can already seen at week 5 the yield is gonna be bigger with the 4 plants packed in.You should optimize your 600 before moving to 1k. It’s a big difference heat and light wise. When you’re pulling more than 600 grams from your 600 in your 4x4, get a 1k for the 4x4, when you can’t fit anymore weed in your 4x4, get a 5x5...
I have air cooled hoods too. 8" seems to close... I keep 600hps about 10-12" away.Need about 8" minimum under my 1000's. (Edit...se. air cooled hoods.)
.I should change out my 600 to a 1000 in 1 tent. My tents are only 6 feet tall bc my basement isn't that tall. How many more inches do you usually have to keep a 1000 watt away from the canopy compared to a 600 watt.
if you run CO2 and maximize your enviro, i think it's doable. don't sell yourself short.I wouldn't say 1 gram per watt is easily doable, I'm not sure anyone else would say that either... I can get .75 with a good yielding strain.