Timber redwood vs clone?

Kindbud421

Well-Known Member
Hello all, new to this forum, not new to growing indoors or out... so i am getting a list together of materials i need to build a clone of timber redwood vs 640w cob fixture. I know what drivers, heatsinks but having problems finding the exact product number for the vero 29’s that timber uses. I think i found them but need confirmation on what i found. BXRC-35E10K0-C-7X-SE ANY HELP WIL BE APPRECIATED. I thank you in advance!
 

Kindbud421

Well-Known Member
Three of those with a Hlg-320h-c1400
Dont wanna do the math while buzzin, how many watts would that give me? Would be running 2 drivers with 3 cobs each. Aiming for 600 w for 4x4 tent in unheated basement northern ny...
 

Kindbud421

Well-Known Member
Dont wanna do the math while buzzin, how many watts would that give me? Would be running 2 drivers with 3 cobs each. Aiming for 600 w for 4x4 tent in unheated basement northern ny...
Basement temp in coldest part of winter is 46-50F and 65f in summer
 

Sinfor

Well-Known Member
Dont wanna do the math while buzzin, how many watts would that give me? Would be running 2 drivers with 3 cobs each. Aiming for 600 w for 4x4 tent in unheated basement northern ny...
Around 575w from COBs, 615w from the wall.
 

pulpoinspace

Well-Known Member
if you do go with cobs i would get BXRC-35G10K0-C-7X-SE

90 cri rather than 80 with the E, a bit more red and far red in the spectrum
 
Top