Powdery Mildew, Sulfer and H2O2

[TheOriginalKryptonite]

If the fungus is on the leaves, then it is in the buds too. Since you are going to harvest in a few days, there is not much that spraying anything will accomplish. If you do burn sulfur, or spray garlic (contains sulfur) or anything else, you will want to wash your plants afterwards anyway.

So at this point I would just harvest and do the H202 dunk. It's best to not use the "typical drug-store 3 percent H202" so try to find the stronger version, and just be careful with it.

I’m new to this site and I know this post has past but I just looked at these pictures, it’s a bin job. I don’t know why anyone would suggest anything else. Mold, treated, sulphur, dunked, washed, all not good. Not something anyone should smoke or dream of letting others do so, thought someone responsible here would have said so when it was originally posted. Respiratory problems, all for one plant!

 

[Hobbes]

.

Thanks for the warning TOK, It's important to keep things in perspective, its only a pound of weed. But I'm not ready to give up on it yet.

.

My goal is to save the whole pound by doing a 20 minute wash in Dr Zymes' Eliminator. If the weed can't be saved for vaporizing I'm looking at either making coconut oil or pressing for rosin.

Using the Magical Butter Machine the coco oil is heated to 160 C for 2 hours, will this kill the mildew?

Another option is to press the bud in my dab press, making rosin, but I don't know if this will kill mildew either.

my final option would be to make ice water hash, don't like the process or the product.

Any help would be appreciated.

.

 

[TheOriginalKryptonite]

Hi Hobbs, everyone’s situation is different and a pound is not to be taken lightly. My whole life commitments and family depend on me. Every run I have a hidden anxiety, where everything will go to shit if something goes wrong. Do what you have to do my friend, nobody can judge really. Cash it if you really need to, I would recommend making rosin for value but still don’t smoke it yourself.

 

[Hobbes]

.

I don't sell any, it's all for me, family and friends.

Do you know what temperature PM dies at? Is it safe to make coconut oil at 160 C?

.

 

[TheOriginalKryptonite]

Powdery mildew would be killed at much lower temperatures than that, but so would the resin. The resin glands will have already been tainted and effected by the mildew beforehand also, degrading. So doesn’t matter if you are successful at killing the spores, it has already done the damage. Your pics looked bad, surprised when you said a pound. It will taste bad also. The methods mentioned are nonsense, they work in the sense of people trying to salvage money at the expense of others health.

 

[BostonBuds]

Few months ago i had my first experience with white mold indoors, I think it was due to a fan shutting off on the same electrical plug as my lights. It was only on the fan leaves from what I could see, buds appeared fine. I harvested then dunked them in a bucket of baking soda and fresh lemon juice, then another bucked with hydrogen peroxide and water, then another with just water. Hung up in front of a fan until dry then and cured normally.

Now with my outdoor plants I spray them weekly with 1 part skim milk to 9 parts tap water to keep mold away, seems to work great.

 

[Hobbes]

.

BostonBuds did your process eliminate the PM? Did you check it with a magnifying scope?

What were the concentrations of your solutions? How much baking soda per gallon? How much H2O2 per gallon?

I tried the hydrogen peroxide wash but I think my solution was too weak - 1 cup of H2O2 to 5 gallons of water. I'm looking at doing the same thing with Dr Zymes' Eliminator, 4 oz per gallon of water, I might add a secondary H2O2 bath if you think yours was helpful.

Thanks.

.

 

[Hobbes]

.

I found 2 more solutions to PM, I think better than all the others.

The first is a gizmo that puts Reactive Oxygen Species into your air and it sterilizes every surface it touches, and with good airflow that'll be every surface.

I have to thank Renfro for putting me on to this, I never would have found it on my own. It's expensive as all get out, $3,400 for the base model, but its cheap compared to loosing a harvest.

https://static.mywebsites360.com/c7d0efaad4674597819ea8c1d874d41a/r/a9caa7c89c9c4762a4db34861c68877a/1/AirROS%204000%20Series%20%2840XX%29%20Purifier%20-%202019.pdf

.

The second is incredibly simple, bake the bud at 100 F for 1 hour and all the PM will be dead.

Sounds too good to be true but I'm trying it this afternoon for sure, might just save my harvest.

.

Introduce a temperature spike

Powdery mildew is also controlled through close attention to temperature. Both types of fungi that cause powdery mildew are sensitive to heat and stop growing when temperatures range over 90°F (32°C). They quickly perish when the temperature rises to 100°F (38°C).

Introducing a temperature spike to kill powdery mildew can be implemented, but if it is done improperly it could be detrimental to the plants.

.

 

[Quenchy]

Please update when possible, I have a couple PM spots on a few fan leaves.

I'm interested in the temperature spike. I could easily do that. But my plants are in the 5th week of flower and I don't want to shock them

 

[Hobbes]

.

Quenchy do you have any pics?

.

 

[curious2garden]

.

Nizza what about the bud that's already harvested and cured? I've got 2 gallons of dried bud that have varying stages of PM.

I've gone over them twice with the CleanLight but there's no difference in the look of the PM.

I've emailed Dr Zymes support and asked if it's safe to do a wash in Eliminator after harvest. They claim it to be safe for humans so I'm hoping so.

.

Because of the possibility of inhaling spores I wouldn't smoke the bud. I'd make edibles with PM bud because eating spores won't hurt. But potentially inoculating your lungs is not a risk I'd take.

Also safe for humans is usually in reference to ingestion (GRAS is oral route). Mode of administration makes a big difference. Therefore you'd be wiser to look towards the tobacco industry or ask Dr Zymes directly if it's safe for inhalation after combustion.

I'm very sorry to see you going through this.

 

[Hobbes]

.

Thanks Curious2Garden, it's good to have a sobering view.

I've got 2 gallons, about a pound, of bud that I baked at 150 F for and hour and 15 minutes. Supposedly PM dies at about 100 F, another way to kill it in your garden.

I'm not going to share any of this bud for smoking but I will make coconut oil out of most of it.

Do you think the contaminated bud would be safe for MY vaporizing after baking for an hour?

.

 

[curious2garden]

......snip.......
Do you think the contaminated bud would be safe for MY vaporizing after baking for an hour?

.

Unfortunately no, while that will kill the living hyphae it won't eradicate the spores, in the OR our autoclaves which use steam (550F) and pressure couldn't, which is what I worry about and why it's so hard to get rid of. I'd just make a ton of edibles and again I'm sorry. I know the grief associated with loss like that.

 

[Hobbes]

.

Thanks again!

.

 

[BostonBuds]

I used a large 18 gallon plastic container for my 1st wash, probably had about 10 gallons of water in it, I mixed in a whole box of baking soda and squeezed 2 fresh lemons in it for the juice.

2nd wash was in a 5 gallon bucket, had about 4 gallons of water and i mixed in about 1 cup (8 oz) 3% hydrogen peroxide. Tried to follow the Jorge Cervantes video.

3rd wash I used the nozzle of the kitchen sink and thoroughly rinsed them.

The mildew first appeared indoors where I had 3 plants about ready for harvest and i had some clones. I harvested and washed as noted above and the bud came out great, I din't think the buds were affected but i wanted to try washing anyways. I was going to just toss the clones away but instead put them outside on the deck and tried spraying with the 1-9 part milk solution and it is working. I will notice mildew on some of the lower fan leaves so i will spray, it seems to wash the leaves off and totally gets rid of it for about a week, then i can see mildew again, so I spray again. The buds are growing great, plants smell wonderful.

I think the plants like the milk spray, they look great. I tried spraying with hydrogen peroxide and water and the leaves look in rough shape for a few days after.

 

[Hobbes]

.

How do I Recognize, Control, and Prevent Powdery Mildew?
Introduction

• Powdery mildew is a common fungal disease that can seriously damage indoor and outdoor crops.
• Powdery mildew can rapidly infect crops in both vegetative and flowering stages, coating leaves, stems and buds in fungus.
• Powdery mildew typically thrives in cool, damp, shaded and poorly ventilated areas. Airborne spores brought into the grow room land on leaf surfaces and will germinate given favorable conditions. High night humidity levels often trigger the growth of mildew spores. Powdery mildew can attack indoor crops year round. Powdery mildew is almost impossible to stop in late flowering, so early detection and control is essential.

Identification & Recognition:

• Identification: Symptoms and damage: Early signs of powdery mildew include white powder/fuzzy patches on leaves (usually low in the canopy) and a fuzzy white coating on lower stems. Note: powdery mildew can be wiped off the leaves for a quick visual check.
• These fuzzy mycelium patches produce airborne spores that rapidly attack adjacent plants; mildew will eventually coat leaves and entire plants, reducing photosynthesis, plant vigor and bud quality.Mildew-Prone Gardens, Plants & Environments:
• Perpetual harvest, dense scrog/sog systems, and damp basement grows are particularly vulnerable to powdery mildew. Note: strains vary in their susceptibility.
• Plants on the edge of a garden, in corners and under stress are attacked first; infection usually starts in the lower canopy where conditions are optimal. As infection progresses, mildew will spread to the top of the plants and finally attack the buds.
• Powdery mildew is favoured by dry atmospheric and growing conditions, moderate temperatures, reduced light intensity, good nutrition and succulent plant growth.
• For this reason it is a very common disease in later summer and Autumn (Fall), but it can be a problem in protected growing areas such as greenhouses, conservatories and grow rooms, on a year round scale. All mildew spores are spread via wind or air movement, and certain insects can also carry the disease.
• Unlike other fungal diseases, such as downy mildew, the powdery mildew spores don’t require a film of water to be present on the leaf surface to germinate and infect the plant tissue. In fact, if the powdery mildew spores are in contact with water they are inhibited to a certain extent. mediumer growers can achieve some control over powdery mildew by simply spraying the leaves with a garden hose in the afternoon to help prevent infection. Powdery mildew spores germinate best in a temperature range of around 22 – 31 C (72-88F), and in shaded areas of the crop, so it is more severe in closely planted crops. If the spores, entering a growing area, make contact with a plant under conditions of reduced light intensity, a temperature of 22 – 31 C (72-88F), and absence of moisture then germination will occur within two hours, and infection will be two days later.

Infection, Indication & Effects:

• Infected buds may appear normal; but are internally dusted with white powder (which cannot be removed by drying), and have a stale, musty/moldy smell when dry. Smoking or trimming infected buds can cause sickness and lung infections, and is not recommended. Infected leaves should be discarded. Lower buds are the most susceptible.
• Powdery mildew is difficult to 100% eradicate; control requires prevention, early detection, and pro-active measures. Preventive gardening: Preventative gardening techniques can be effective in defending against powdery mildew.
• Maintain healthy plants. Stressed plants are often attacked first, so it is important to monitor and remove unhealthy plants.
• Detection. Inspect corners, edge and lower portions of the garden frequently. Remove infected leaves, or move infected plants out of the main garden.

Prevention, Treatment & Good Gardening Habit:

• Don't water plants at night. Reduce or stop watering before the lights have gone out to help evaporate and reduce room humidity.
• Reduce plant density. Spread plants apart to improve air circulation. Don’t place plants directly against walls or into corners, typically areas of poor air circulation.
• Pull plants 6”-1’ away from walls or reflective surfaces, and blow air to these areas.
• Pruning. Remove the lowest leaves as the plants mature and prune the bottom 1/3 of the plant during veg to increase airflow inside the lower canopy. Remove all unnecessary
• growth. Put an oscillating fan down low to blow through this pruned area.
• Foliar feeding. Foliar feeding can sometimes cause excessive nighttime humidity levels. Discontinue if mildew appears. Harvest early if mildew is a problem.Environmental control: Improving growroom conditions is an excellent way to passively prevent and minimize damage by powdery mildew.Monitor humidity levels. A quality humidity gauge should be used to monitor day and night r.h levels. Avoid prolonged high humidity levels: 50-60% r.h is ideal.
• Humidity must be kept below 70% during the night; levels over 80% will guarantee infection within 48 hrs. Ventilation. Constant air movement inhibits mildew, and lowers humidity. Use oscillating fans on all sides of a garden to circulate the air. Ventilate air out of the grow room periodically during the night cycle to reduce humidity from irrigation and transpiration.
• Note: Once mildew is established, oscillating fans may actually spread spores throughout the garden. Stop fans, treat infected areas, and then resume airflow.Heat night air. Warm air holds more moisture than colder air. Heat helps dry the air and lower humidity during the night cycle. Heat the room at night and exhaust
• the room periodically to remove this warm/moist air.
• Dehumidifier.Very effective in preventing mildew from spreading. Set controls for 40-60% and let run during night cycle.
• Hepa filter. Filter the intake with a Hepa filter to eliminate spores from entering room. Inspect and change filter frequently.
• Ionizer / Ozone generators. Leak some output to kill airborne pathogens and spores.

.

 

[Hobbes]

.

To be, or not to be...systemic? That is the question:
I’ve spent countless hours trying to find the answer to this question. Is powdery mildew systemic? Every piece of scientific research I’ve read has told me that powdery mildew is NOT systemic, but rather a spore that germinates and reproduces at an incredible rate given the right circumstances and environment. A spore can be transferred in your hair, your clothing, or can float through the air and get sucked into your ventilation, brought in by your pet. It can lie dormant on top of a reflector, a drop-cieling, in the corner of your room, waiting for an optimal time to germinate. A spore is so medium it can be transferred by an insect, even a gnat, so even if P.M. is not systemic, the ease of contamiation would make it seem so. I personally have more regard for factual information, scientific research and laboratory results than I do for personal opinions and “experience”. This being said, when I talk to professional growers (and I’ve talked to many), well their opinions and experiences almost never coincide. Some are 100% certain that P.M. IS NOT systemic, while the other half are just as assured that P.M. IS indeed systemic. I try to remain open to both possibilities…. just in case! Maybe someone can get ahold of Ed Rosenthal for me and ask the great himself ? I’ve listed multiple ways to deal with powdery mildew in your garden. Systemic...and non-systemic. I hope I can give you some ammo, and even some heavy artillery against the war on P.M. Good luck, happy researching and please, don’t always believe what you read in the forums !Chemical Control:

Note: Chemical information sourced from maximumyield.com and cannibisculture.com Chemical control should be considered a last resort.

Chemicals should be sprayed only in veg or early flower to prevent absorption into the buds and burning bud hairs. Chemicals may have to be applied repeatedly to be effective, and may take a few days for noticeable results. Use a surfactant to help adhere chemical to leaf surface. Some chemicals are more harmful than others; follow label directions and observe precautions. Always spot spray first. Spraying individual leaves can be an option. Note: many chemicals will leave a residue that appears similar to powdery mildew!

Sulphur:
*Sulphur Powder-The powdery mildew fungus is vulnerable to the action of sulphur throughout most of its life cycle.

Sulphur works by `selective toxicity’ that is, it is more toxic to the parasite than to the host. An effective sulphur application rate would be 110-220ml per 100 litres of water of a `suspension or wettable powder’ product, when the fungus is first observed, followed by repeat applications two weeks later.*Garden sulphur: A common non-toxic spray, sulfur interferes with mildew cellular respiration. Spray young plants weekly before hairs form (or spray lower leaves only), then discontinue. Do not wash off. Note: dried sulphur spray looks similar to mildew. For best results, prune plants in veg/early flower, then spray lower stems and foliage.

Warning: can give a sulphur taste if sprayed directly onto buds! Foliar spray: 15-20ml sulphur powder/Liter water. Keep well mixed when spraying. Note: will not wash off buds.

Re-application may be necessary.* Sulphur burner. These devices vaporize (not burn) elemental sulphur, coat the room with a fine film of sulphur, inhibiting PM spores from germinating. Also inhibits insects to some degree. Run for 12 hours initially (at night, exhaust blower off, circ fans on), then 1-4 hrs/night thereafter. Some discontinue when buds begin to form, other let it run up to the last week. Very effective prevention.

NOTE:Sulphur dust or flowers of sulphur poses little or no risk of inducing resistant mildew strains.

Alkaline Water
Alkaline water can affect powdery mildew, as mildew cannot grow in basic conditions. Mist plants generously with water at 8.0+ pH frequently; discontinue when buds begin to mature to prevent budrot. [Editor’s note: this does work and is effective in late flower. Alkaline water does not seem to affect buds or bud hairs. The effect is temporary, but drastically slows mildew grow and spread. Reapply every 4-5 days.

Baking Soda

• Sodium Bicarbonate “Sodium collapses the powdery mildew cell wall”.
• Baking soda leaves an alkaline residue on the leaves, which should be washed off with water before more is applied.
• Foliar spray: 15ml / gallon Potassium Bicarbonate: “Collapses and desiccates the mildew hyphae. Very safe, very effective contact fungicide”. Kaligreen and Armicarb100.Banner Maxx: A systemic defense. Banner MAXX ™ is a systemic fungicide that provides effective broad-spectrum disease control in turf and ornamentals. It is a microemulsion concentrate formulation providing excellent tank mix compatibility and stability; no odor, and mixes into a clear solution.
• Eagle-20: A systemic defense. Eagle 20 EW containes the active ingredient myclobutanil, a demethylation inhibitor (DMI) that hinders sterol synthesis, which restricts cell wall development in targeted pathogens. Eagle 20EW does not display the plant growth regulator effects often associated with other locally systemic sterol-inhibitor fungicides or those with similar modes of actionFunga-Flor
• TR: Fungaflor® TR Dry Micro Total Release Fungicide is the first total-release fungicide with broad-spectrum prevention and control of plant diseases, including alternaria, downy mildew, powdery mildew and rust, as well as the No. 1 foliar disease in the greenhouse market, botrytis.
• Green Cure: potassium bicarbonate, is commonly used in food products and is completely organic. A commonly used product in battling powdery mildew
• on cannabis plants.
• Neem Oil: Protects and kills mildew by inhibiting respiration; also protects against mites and may improve plant vigor. Results are noticeable
• in a couple of days.
• Pro-silica: (Soluble Silicon) ”… increases resistance to pathogens by accumulating in…(leaf and root) cells of plants, providing a barrier against penetration by invading fungi such as powdery mildew and Pythium. Foliar applications leave deposits of silicon…on the leaf surface that promote effective physical barriers to… infection.” Pro-silica is alkaline. Foliar spray: 1 part in 5
• Silica: Many growers achieve control or prevention of mildew disease with application of silica based dusts or sprays. Silica gives a protective coat over the leaf surface and thus prevents the mildew spores from germinating and infecting the plant tissue.
• SM90: A natural plant extract in a vegetable oil base. Foliar spray: 10ml/liter
• Copper Sulphate: “Copper ions inactivate some fungal enzyme systems, killing the mycellium.” Effective one-shot application, but production may be discontinued.
• Benomyl: Apply in veg only.
• Saprol: A systemic defense. One of the chemical fungicides which is still effective against powdery mildew is `triforine’, sold under
• the name of `Saprol’. Saprol is a systemic fungicide with both curative and protectant action against a range of fungal disease. This should be sprayed at the fist sign of
• infection (at a range of 150ml/100 litres of water), and repeated 10 days later. Powdery mildew can develop resistance to Saprol, so its use should be limited to 4
• applications per season, and rotated with use of another fungicide such as sulphur based products.
• Malatox: by the chronic: …”This is a wonder cure. Mildew completely vanishes for up to 7 weeks! Make sure you spray before the first week of flowering.” Foliar spray: 2.5ml per liter of water.

Biological controls

• Unpasturized Milk: Note: must be fresh, not store bought (which is pasturized). Diltute 10 parts water to 1 part milk. Works, although the milk may smell.AQ10:
• A biofungicide. Ampelomyces quisqualis is a fungus that “parasites the powdery mildew organism. It offers control over a long period of time.” Effective only in initial stages of infection.
• Plant Shield: is a foliar spray (General Hydroponics), which kills many types of leaf and root fungus. Trichoderma harzianum strain T-22. Safe to use. Takes 2-10 days.Serenade:
• “The fermentation product of a bacterium, bacillus subtillis, that inhibits cell growth of fungi and bacteria. It is effective and easy to spray or use as a dip”. Contact fungicide.

.

 

[calvin.m16]

NEVER BURN SULFUR DURING FLOWER unless you want some match stick weed.

I would recommend treating the powdery mildew with Green Cleaner solution or Plant Therapy solution depending on what you can obtain. They're available on Amazon and any other online/in store garden shop for the most part.

Honestly once you harvest I would throw that genetic out unless you're prepared to treat your plants with some hardcore fungicide.

 

[Quenchy]

.

Quenchy do you have any pics?

.

 

[Quenchy]

Hey guys, I just wanna say this thread has been helpful! I also want to say that I have found a great video on how to battle PM. Check this video out!