DIY with Quantum Boards

[Barristan Whitebeard]

I have been noticing that HLG has been running out of stocks quite frequently these day. I ordered one of the Horticulture Lighting Group lights 2 months back and yet to receive the shipment for it

Which light did you order? Not one of the discontinued Diablo kits right?

If you ordered from the site you linked, ShopGrowSpaces, maybe the issue is on their end. Have you contacted them?

 

[CrvenaZvezda]

Got my veg fixtures done and hung. Got another flower light to make.
View attachment 4694314View attachment 4694316

What are you using to make those frames? Definitely digging your layout and those frames make for a practical setup.

 

[ianc4990]

What are you using to make those frames? Definitely digging your layout and those frames make for a practical setup.

The veg light is made from 3 foot angle aluminum. I think its half inch or 3/4 angle from lowes. I didnt even cut them down. Just drilled hole in the overlap corners and bolted the frame together with the qb120 with some machine screws. Less than 20 dollars all together per 4x4 of frame and bolts. MAKE SURE TO NOT HIT THE OPEN SOLDER POINTS ON THE QB120 BOARDS!

 

[pop22]

I didn't think they looked like a legit dealer either. If whoever you bought from isn't replying................ time to raise some hell!

Which light did you order? Not one of the discontinued Diablo kits right?

If you ordered from the site you linked, ShopGrowSpaces, maybe the issue is on their end. Have you contacted them?

 

[pop22]

Sad to see we get no love from HLG anymore.

 

[PJ Diaz]

Sad to see we get no love from HLG anymore.

It doesn't seem like the site admin wants them here, after they locked the HLG Scorpion thread.

 

[pop22]

Didn't even know they had that thread!

It doesn't seem like the site admin wants them here, after they locked the HLG Scorpion thread.

 

[Frank Nitty]

Pineapple Poison fattening up!

View attachment 4712158View attachment 4712159

Go pop go

 

[pop22]

 

[pop22]

How about a GG4 auto in a one gallon pot, under my old, QB 304s

 

[2com]

It doesn't seem like the site admin wants them here, after they locked the HLG Scorpion thread.

That sucks.
I just thought everyone at HLG was way too busy to interact here at the moment.

 

[pop22]

They locked it because a couple assholes on the thread ignored the mods request to keep it civil in a vendor thread. Shoulda just banned the trolls!

That sucks.
I just thought everyone at HLG was way too busy to interact here at the moment.

 

[pop22]

Pineapple Poison getting close 2 more weeks I think

 

[pop22]

Leaves are turning purple

 

[KlompenOG]

Here's my DIY QB96 setup. I know its a little amateur but I didn't use any measurements to create it

 

[pop22]

I figure one more week!

 

[WeedSexWeightsShakes]

Hey guys quick driver pairing question.
I have some QB132s and was wondering if I could use a hlg 240 c1050 driver wired in series?
current drivers I have them on aren’t dimmable. wife wants to use them but doesn’t need them blasting.
thanks

 

[TWest65]

Hey guys quick driver pairing question.
I have some QB132s and was wondering if I could use a hlg 240 c1050 driver wired in series?
current drivers I have them on aren’t dimmable. wife wants to use them but doesn’t need them blasting.
thanks

At 1050 ma, the qb132 boards should be around 33 volts each, times 4 is 132v. The hlg240-c1050's constant current range is 119 to 238 volts. So you're good to go.

 

[WeedSexWeightsShakes]

At 1050 ma, the qb132 boards should be around 33 volts each, times 4 is 132v. The hlg240-c1050's constant current range is 119 to 238 volts. So you're good to go.

thank you sir!

 

[pop22]

Linda Seeds Gorilla Glue auto. 44" tall, in a 1 gallon pot! Under the QB 304s