Electrical cord quick disconnects - What kind do you use?

ms_sucks

Member
Just what the title says. What are some of the best quick disconnect adapters that you guys are using on your DIY builds? Primarily DC side but anything cool on the AC side besides the normal extension cord end too.

Feel free to add any other nice additions you've discovered in your DIY process.
 

Rdubz

Well-Known Member
I just got working some 12v dc solid state relays is this the type of disconnect your asking about ?
 

ms_sucks

Member
Wago's are definitely quick and easy. Models 221-14* is what to look for, the last digit is the number of wires it will connect together like 221-142 (2 wires) or 221-145 (5 ports to put wires in). The 222 series is the older version.

I've got a bunch GM Weather-pack type fittings I'm thinking about using between the driver and each light. Definitely moisture proof and overkill but that's what I have laying around. I gotta go find them somewhere in the shop. Polarity and stoner-proof.

What else are people trying? I want to see some good 'ol stoner ingenuity!

What about the AC side? Anyone using anything more creative than the regular extension cord end or whatever?

Have you guys seen this Solder Seal product? Looks really cool, inexpensive and effective. Going to order a kit:
Amazon search results for 'Solder Seal connectors'
How to video: https://www.amazon.com/vdp/65174eb1145848fab3eb4ce4f6996935?product=B07BJX51VT&ref=cm_sw_em_r_ib_dt_Ro7q9Cr5yo02z
 

ms_sucks

Member
Could you insert some type of quick disconnect fittings on your AC side right after coming out of the driver, then join all of your driver AC inputs into one extension cord end? Within reason of course, I wouldn't do this with 10 HLG-600h-54A's, but 3, maybe?

Why not, it's no different than plugging 3 of them into a surge protector that has one single cord that's plugged into the house AC outlet?

Saves cost on those cord ends and you still have a way to disconnect each driver if needed without cutting any wires.

But I'm no electrician, just the opposite almost, complete wiring noob. I don't want to burn my house down.
 

Rocket Soul

Well-Known Member
Could you insert some type of quick disconnect fittings on your AC side right after coming out of the driver, then join all of your driver AC inputs into one extension cord end? Within reason of course, I wouldn't do this with 10 HLG-600h-54A's, but 3, maybe?

Why not, it's no different than plugging 3 of them into a surge protector that has one single cord that's plugged into the house AC outlet?

Saves cost on those cord ends and you still have a way to disconnect each driver if needed without cutting any wires.

But I'm no electrician, just the opposite almost, complete wiring noob. I don't want to burn my house down.
You need someway to switch the drivers on individually or youll end up having problems with fuses and inrush current. Make sure any wiring is rated for high current
 

Rdubz

Well-Known Member
I mean marrettes are the easiest to use there are many different sizes and then some electrical tape around them will suffice I’m a sparky by trade so it’s quicker and easier in most cases
 

ms_sucks

Member
I mean marrettes are the easiest to use there are many different sizes and then some electrical tape around them will suffice I’m a sparky by trade so it’s quicker and easier in most cases
I've heard them called wire nuts as well.
 

1212ham

Well-Known Member
Could you insert some type of quick disconnect fittings on your AC side right after coming out of the driver, then join all of your driver AC inputs into one extension cord end? Within reason of course, I wouldn't do this with 10 HLG-600h-54A's, but 3, maybe?

Why not, it's no different than plugging 3 of them into a surge protector that has one single cord that's plugged into the house AC outlet?

Saves cost on those cord ends and you still have a way to disconnect each driver if needed without cutting any wires.

But I'm no electrician, just the opposite almost, complete wiring noob. I don't want to burn my house down.
You want to save the cost of normal AC plugs by buying a different type of connector? I don't get it, what does it accomplish?
I consider a normal AC plug quick connect. :wink:.

These are good to connect power cords.

Molex connectors are common. RC battery connectors are another option for DC applications.
https://www.buddyrc.com/collections/connector?view=all

 

ms_sucks

Member
You want to save the cost of normal AC plugs by buying a different type of connector? I don't get it, what does it accomplish?
I consider a normal AC plug quick connect. :wink:.
Yeah, you're right. I was thinking more of consolidation though on that side.

I think the weather pack connectors (automotive use) I've got will be overkill enough, don't need aviation grade lol. Those look like they all need to be soldered right? Really I'm just using the wp's because I have them on-hand along with the ratcheted crimper.
 

DukeFluke

Well-Known Member
That was a legit question btw. Are they good to use or is there some reason not to use them?

I've got a few lying round. I'll use them if I can
 
Top