That would work right until boomBuild a fire under it.
What did you accomplish today?
- Thread starter 420God
- Start date
raratt
Well-Known Member
They have popoff valves for overpressure. Wouldn't want to get to that point though. You can see them flaring when a fire comes through.
Bobby schmeckle
Well-Known Member
God you guys never disappoint. I love you from the bottom of my cold, dead penis.If anyone’s bored and wants some good old fashioned fun....
join me here.
COMMERCIAL GROW.Never seen this before ANY THOUGHT??
How much watts per foot are you running? Pictures are deceiving, so I'm told a se 1000w hps covers approx a 4x4 area, leds allow for 600 watts for a 4x4, somewhere around 35 watt per square foot or more! I believe this to be the low end of the scale for light saturation. Can you enlighten me...www.rollitup.org
Grandpapy
Well-Known Member
That's for the truck, small one right under the oil pan to get it going! (matches don't care what the temp is)Build a fire under it.
DCcan
Well-Known Member
They actually do that with skidders and bulldozers in the woods. Not unusual at all.Build a fire under it.
Huge Propane torch with a piece of metal ducting and a tarp works best.
Last edited:
manfredo
Well-Known Member
I am decarboxylating weed for the first time, and it felt so very wrong go break up a 1/2 ounce of my finest buds and put them in pre-heated jars in my oven.
After reading a ton of info on making oil i found this person ICHIBANCRAFTER on line who's practices sound the best to me, for what I want to do and he (or she, IDK) has got a bunch of great info...Or I hope it's great! https://extractcrafter.com/
Happy Valentines Day
After reading a ton of info on making oil i found this person ICHIBANCRAFTER on line who's practices sound the best to me, for what I want to do and he (or she, IDK) has got a bunch of great info...Or I hope it's great! https://extractcrafter.com/
Happy Valentines Day
raratt
Well-Known Member
I just put down parchment paper on a cookie sheet to decarb.I am decarboxylating weed for the first time, and it felt so very wrong go break up a 1/2 ounce of my finest buds and put them in pre-heated jars in my oven.
After reading a ton of info on making oil i found this person ICHIBANCRAFTER on line who's practices sound the best to me, for what I want to do and he (or she, IDK) has got a bunch of great info...Or I hope it's great! https://extractcrafter.com/
Happy Valentines Day
BudmanTX
Well-Known Member
Holy crap it's cold. We got the ice, more to come today. Say snow later tonight. Really here....smh. checked on the dogs already, ran the vehicles for a few minute, made sure the fridge is full. Packing it in for the rest of the day and night.....
Oh space tomatoes where are u.....
Oh space tomatoes where are u.....
manfredo
Well-Known Member
awesome article on it right here...Good luck to us both!!!
Decarboxylation (decarb) 101: Basic understanding and at home method comparison - Home Extraction by IchiBanCrafter
The vast majority of available information on decarb was unorganized and unreliable, stoking my motivation to work on this experiment to find some clarity on different decarb methods. There are far too many methods and time/temp combinations for me to cover all, so I chose to compare a few of...
extractcrafter.com
natureboygrower
Well-Known Member
You probably have a good idea on how much this new equipment costs. Maybe 50 years ago they had to do that. At 350k for a skidder nowadays, I'd like to think a propane torch isnt needed to warm them up
printer
Well-Known Member
What have I done? Found I have wasted a lot of time? Carving a neck for a guitar, found a pitch pocket. Installed a truss rod, radiused a fretboard, cut the fret slots, glued onto the neck blank. Carved away. I should have stopped when I found it, thought maybe I could salvage it.
tyler.durden
Well-Known Member
What have I done? Found I have wasted a lot of time? Carving a neck for a guitar, found a pitch pocket. Installed a truss rod, radiused a fretboard, cut the fret slots, glued onto the neck blank. Carved away. I should have stopped when I found it, thought maybe I could salvage it.
Yep. Training to be a luthier takes many, many years of intense apprenticeship. It is magical what the good ones can create, I love watching good workshops do their thing. Lots of vids on the process on YT.
lokie
Well-Known Member
You did not offer up this link.awesome article on it right here...Good luck to us both!!!
Decarboxylation (decarb) 101: Basic understanding and at home method comparison - Home Extraction by IchiBanCrafter
The vast majority of available information on decarb was unorganized and unreliable, stoking my motivation to work on this experiment to find some clarity on different decarb methods. There are far too many methods and time/temp combinations for me to cover all, so I chose to compare a few of...
The Cannabis Oil Suppository Debate: Personal Testing & Results - Home Extraction by IchiBanCrafter
By Troy Ivan [email protected] Using cannabis to treat medical conditions is gaining popularity and acceptance daily. While smoking, vaping, edibles, and topical applications are very familiar, suppositories are still in the shadows and a relatively unknown alternative. After learning about...
extractcrafter.com
manfredo
Well-Known Member
Oh I saw it...And I thought it probably will get it's own thread! THC suppositories... OK!You did not offer up this link.
The Cannabis Oil Suppository Debate: Personal Testing & Results - Home Extraction by IchiBanCrafter
By Troy Ivan [email protected] Using cannabis to treat medical conditions is gaining popularity and acceptance daily. While smoking, vaping, edibles, and topical applications are very familiar, suppositories are still in the shadows and a relatively unknown alternative. After learning about...
farmingfisherman
Well-Known Member
Did a walk with the wife and helped the neighbor get his car back into his driveway after he tried to get out of it.
printer
Well-Known Member
I am finally getting back to doing some guitar work. I have a number of guitars that need to be completed but the humidity is too low in my place to work on them. This is a project I was not too concerned with as far as humidity making the wood decide to go one way or the other. I doubt I would ever hold myself as being a luthier, a guy who can build the odd guitar or two perhaps.
I just got a reply on an acoustic guitar site and a real luthier told me to just glue in a sliver of wood. I was concerned with the glue not holding because of the pitch in the pocket. We will see what he has to say about that. This is just something that I can use to practice with when my other guitars are too heavy for me to play. I have a neurotic pain issue that sometimes makes just wearing cloths painful. So this is to be a lightweight guitar for those times. Some projects I need to get back to.
tyler.durden
Well-Known Member
Wow, sure looks like a luthier workshop. I play classical guitar, do you play both classical and acoustic? Sorry to hear about the neuropathy. Do you ever practice nude to alleviate it?I am finally getting back to doing some guitar work. I have a number of guitars that need to be completed but the humidity is too low in my place to work on them. This is a project I was not too concerned with as far as humidity making the wood decide to go one way or the other. I doubt I would ever hold myself as being a luthier, a guy who can build the odd guitar or two perhaps.
I just got a reply on an acoustic guitar site and a real luthier told me to just glue in a sliver of wood. I was concerned with the glue not holding because of the pitch in the pocket. We will see what he has to say about that. This is just something that I can use to practice with when my other guitars are too heavy for me to play. I have a neurotic pain issue that sometimes makes just wearing cloths painful. So this is to be a lightweight guitar for those times. Some projects I need to get back to.
Chunky Stool
Well-Known Member
It depends on how you vape.
How to make cannabutter for edibles with our easy recipe
Cannabis-infused butter, or cannabutter, is one of the most common ways to make edibles. Check out our easy step-by-step recipe to make your own.www.leafly.com
Sounds easier than I thought!!
I had a thought. One friend of mine has been saving his leftover dry vape material, saying "I know there is a use for this stuff". And I bet he has a pound or more of it, probably a few pounds...they are heavy all day long vapors!! It seems like you could make cannabutter from it, and it's already been decarbed in the vaporizer. There's definitely some THC left, often quite a bit, when dry vaping, so why not? Anyone done it??
I gradually increase temperature until it hits 420 so the spent herb is very dark.
Last edited: