Pauly1118
Well-Known Member
Ok so I just finished my first grow a month ago and been planning this room for a while now.. I had an 8x8 room with 4x 1000w air cooled HPS lights (could only run 3x due to heat issues) and I managed to yield 3 1/2 pounds off 11 plants (had 12x but one was just 1’ clone I threw in just because my limit is 12 in Michigan)
Anyways, I’m sure a lot of people would say just continue with your current room but I plan on going all out making profit from this and 3 pounds just won’t cut it for me, I want those 20-50 pound yields eventually..
Again anyways, this is my plan.
24’ x 10’ room framed, drywalled(mud finished) ( im a contractor so I remodel houses for a living) I then want to seal the backside of the drywall with some liquid rubber to ensure a good sealed room and also silicone all corners on the inside and then glue reflective Mylar onto the inside walls.. I then plan to have 6x 16” wall mounted oscillating fans( 3x each long 24’ wall) 36k btu mini split installed in the middle of room on one of the 24’ walls
next I plan on having 10x 1000w 8” Air cooled hoods/lights (2x Rows/5x on each side) I have a glass block window on both sides of the room which I can run 8” ducting from one end to the other essentially brining air in from one side and blowing the heat out of the other end.. ( this will only be for this yield/run until I can buy 10x 800w LED lights for next run) Each duct will have an 8” A/C infinity inline fan.. I then would like to somehow run a 4 burner CO2 generator OUTSIDE of the actual grow room and weld mental ducting to the face of the generator and tap it into some duct work running long ways down the entire ceiling/room with 8x duct openings/4x on each side to release/rain co2 down onto the plants.. I want to use 12x 20 gallon fabric pots filled with coco/perlite/worm castings (70/20/10) with a 2” hydroton layer on top. I also plan to have 2x 8” Ac infinity inline fans/carbon filters on each 10’ wall to scrub the air.
let me know what you guys think of this plan. Thanks
Anyways, I’m sure a lot of people would say just continue with your current room but I plan on going all out making profit from this and 3 pounds just won’t cut it for me, I want those 20-50 pound yields eventually..
Again anyways, this is my plan.
24’ x 10’ room framed, drywalled(mud finished) ( im a contractor so I remodel houses for a living) I then want to seal the backside of the drywall with some liquid rubber to ensure a good sealed room and also silicone all corners on the inside and then glue reflective Mylar onto the inside walls.. I then plan to have 6x 16” wall mounted oscillating fans( 3x each long 24’ wall) 36k btu mini split installed in the middle of room on one of the 24’ walls
next I plan on having 10x 1000w 8” Air cooled hoods/lights (2x Rows/5x on each side) I have a glass block window on both sides of the room which I can run 8” ducting from one end to the other essentially brining air in from one side and blowing the heat out of the other end.. ( this will only be for this yield/run until I can buy 10x 800w LED lights for next run) Each duct will have an 8” A/C infinity inline fan.. I then would like to somehow run a 4 burner CO2 generator OUTSIDE of the actual grow room and weld mental ducting to the face of the generator and tap it into some duct work running long ways down the entire ceiling/room with 8x duct openings/4x on each side to release/rain co2 down onto the plants.. I want to use 12x 20 gallon fabric pots filled with coco/perlite/worm castings (70/20/10) with a 2” hydroton layer on top. I also plan to have 2x 8” Ac infinity inline fans/carbon filters on each 10’ wall to scrub the air.
let me know what you guys think of this plan. Thanks
