AC infinity controller.

[BlueDream305]

How do you properly use AC infinity exhaust fan and inline fans?
currently i am running a 48x24x72 AC infinity grow.
I have an AC infinity T6 located inside the tent exhausting from the top and out of a window to the outside.
I have an AC infinity T4 inline fan blowing air from the bottom into the tent (fan is on top of the tent)
I operate both units together into the AC infinity controller on the setting of 5.
i also have additional air flow via 2 desktop fans one is on the ground blowing under the canopy the other is mounted to the tent blowing through the canopy.

With it running 24/7 i cant get my humidity to stay passed 38% even with a Vivosun 6L humidifier running, once i turn off my exhaust the temperature increases from around 68F to 73F and humidity rises to the 50% range. (Where its ideal)
when lights go out my humidity raises to 70% and temp drops to 55F!

can someone please explain the controller custom high/low settings?
Should the exhaust and inline be on all of the time?
has anyone had any problems with major swings using this equipment?

thanks

 

[1212ham]

How do you properly use AC infinity exhaust fan and inline fans?
currently i am running a 48x24x72 AC infinity grow.
I have an AC infinity T6 located inside the tent exhausting from the top and out of a window to the outside.
I have an AC infinity T4 inline fan blowing air from the bottom into the tent (fan is on top of the tent)
I operate both units together into the AC infinity controller on the setting of 5.
i also have additional air flow via 2 desktop fans one is on the ground blowing under the canopy the other is mounted to the tent blowing through the canopy.

With it running 24/7 i cant get my humidity to stay passed 38% even with a Vivosun 6L humidifier running, once i turn off my exhaust the temperature increases from around 68F to 73F and humidity rises to the 50% range. (Where its ideal)
when lights go out my humidity raises to 70% and temp drops to 55F!

can someone please explain the controller custom high/low settings?
Should the exhaust and inline be on all of the time?
has anyone had any problems with major swings using this equipment?

thanks

It can't control anything if set to a constant speed 24/7. Set it to auto mode and set temp/humidity limits.

Ventilation fans don't need to run all the time, some will disagree. 68F-73F is far from ideal, go for the low 80's. LED doesn't raise leaf temp above air temp with infrared like HID does.

 

[Goodshit97]

I run a 36x36x72 ac infinity with t6 infinity. Currently i have the controller 67 with bluetooth. I set my temp to 82, humidity during veg at 55 and set fan speed at 6 then run it on auto.

The fan will go qbove 6 if the tent goes above your alarm settings.

Ive found running on auto makes thing so much less of a hassle.

 

[Goodshit97]

Also ive found with my 4 inch inline running in the winter, i cant stay above 74 so i just shut it off and only run it in the warmer months. Just my 2cents

 

[Bookush34]

My AC infinity controller.
I set my high temp and high humidity
Fan comes on only when it reaches either one of those values.

in my environment the fan cycles on temperature. It’s a struggle to get humidity high.

as long as your fan is cycling at least a few times a hour. Your good. Lots of air exchanges