Best Nutrients for Quality at Any Price

[Blazin Budz]

Pffffft....I feed 4.0 EC at peak demand. Most people here use LEDs.

Coco plants drooping, help needed

Hey guys I have 14 plants in coco/perlite right now under two 600W HLG LEDs in a 4x4 and they’ve been going back and forth between doing ok and drooping. This is my first time running coco so I’m trying to get watering figured out. I can’t figure out if I’m under or overwatering. Temps: 75-80F...

www.rollitup.org

Check out this thread from just a couple of weeks ago where many well known members tried to discredit me for saying I feed at 3.0 EC.

 

[PeatPhreak]

It only takes 100 comments to be a so called well known member here.

 

[lusidghost]

3.0 is wild, but 4.0? wtf? My truncheon only goes to 3.6.

 

[PeatPhreak]

2000ppm doesn't burn my plants.

 

[lusidghost]

2000ppm doesn't burn my plants.

I'm not calling you a liar. I just think that's crazy. I use LED and have never gone over 2.4 without burning mine. And that was back with Canna Coco AB, which seems to be less concentrated than Jack's. Using Jack's I can't take it above 1.8 without seeing signs of toxicity.

 

[PeatPhreak]

I'm not calling you a liar. I just think that's crazy. I use LED and have never gone over 2.4 without burning mine. And that was back with Canna Coco AB, which seems to be less concentrated than Jack's. Using Jack's I can't take it above 1.8 without seeing signs of toxicity.

It works for me in peat fed 15x a month. I'm not saying my leaves are 100% flawless every grow, but nute burn has not been a problem.

 

[Tolerance Break]

Coco plants drooping, help needed

Hey guys I have 14 plants in coco/perlite right now under two 600W HLG LEDs in a 4x4 and they’ve been going back and forth between doing ok and drooping. This is my first time running coco so I’m trying to get watering figured out. I can’t figure out if I’m under or overwatering. Temps: 75-80F...

www.rollitup.org

Check out this thread from just a couple of weeks ago where many well known members tried to discredit me for saying I feed at 3.0 EC.

Sounds like youre butt hurt people dont agree with you. If you want to grow at 3 EC from clone to finish, do it. Show the end results and change our minds, otherwise, who cares?

 

[PeatPhreak]

Sounds like youre butt hurt people dont agree with you. If you want to grow at 3 EC from clone to finish, do it. Show the end results and change our minds, otherwise, who cares?

This is what high EC feeding looks like:

https://www.rollitup.org/t/from-the-tents-of-peat-phreak.1065822/

Not butthurt if people think 2000ppm is too high.

 

[Tolerance Break]

This is what high EC feeding looks like:

https://www.rollitup.org/t/from-the-tents-of-peat-phreak.1065822/

Not butthurt if people think 2000ppm is too high.

Beautiful girl you got there!

It has less to do with the assertion that it can be done and more to do with his attitude. I ran my first/last grow at jacks recommended 2.4 EC and the leaves got pretty crispy, but I got some decent results. I dont think running that strength is ideal for my style and set up, but I would never look at your plant and say you fucked up.

 

[PeatPhreak]

Jacks used at 321 is more likely to burn than my recipe

 

[Tolerance Break]

Jacks used at 321 is more likely to burn than my recipe

Cant argue with that

 

[Hollatchaboy]

My opinion is, it really doesn't matter what people think the ec should be. What matters is what the plant thinks the ec should be. I have a feeling the ec that a plant can take will differ from 1 nute brand to the next, anyways.

 

[lusidghost]

I have a feeling the ec that a plant can take will differ from 1 nute brand to the next, anyways.

I've definitely noticed this while jumping around to a few different brands.

 

[Hollatchaboy]

I've definitely noticed this while jumping around to a few different brands.

I've had the same results as you. Also some strains can handle more than others, ime.

 

[lusidghost]

I've had the same results as you. Also some strains can handle more than others, ime.

That's the madness of pheno hunting. Especially with pollen chucked seeds. Some strains / phenos get fried while others are starving. I've always preferred heavier feeders just because it's easier to fix a deficiency than a toxicity.

 

[xtsho]

Ask the plants what the best nutrients are. They'll tell you nitrogen, phosphorus, potassium, calcium, magnesium, etc... They don't care what brand it is or what it costs.

 

[MisterKister]

I'm running Athena pro-line at 3.0 ec from start to finish. I ended up with some burnt tips because I forgot to lower my ec after shwazzing but before that the leaves were absolutely perfect. The nose seems to be on point as well.

 

[bk78]

This is what high EC feeding looks like:

https://www.rollitup.org/t/from-the-tents-of-peat-phreak.1065822/

Not butthurt if people think 2000ppm is too high.

Just how I thought they would look. Crispy tips

Cute photography though bro +1 rep

 

[PeatPhreak]

Just how I thought they would look. Crispy tips

Cute photography though bro +1 rep

We don't the tips here in America, Hoser!

 

[lusidghost]

I do find it strange that I can feed my little tiny clones the same water as my flowering plants. What I've learned this cycle is runoff allows way more flexability nutrient wise. A plant needs very little food without runoff, to the point where it's a picky eater. With plenty of runoff you can feed it almost whatever you want.