cincismoker
Well-Known Member
my plant is about 8 weeks into veg. let me know what u think any advice is good thanks
new pics man check em out
- Thread starter cincismoker
- Start date
cincismoker
Well-Known Member
my bad forgot to post the pics
cincismoker
Well-Known Member
here they r
Attachments
cincismoker
Well-Known Member
yea i only had 1 cfl an a small flourecent on it but 2 night i put 2 more cfls on it. 26 watters
sasarchiver
Well-Known Member
Was going to say. Hell of a small for 8weeks into veg. Im only 3weeks from seed and its way bigger and bushier than that. Not enough light or plant is potbound?? keep us updated, if it was a problem and u sorted it, let me/us know...
cincismoker
Well-Known Member
yea i got a six pack of 26 watters but i aint got a way to hook em up
ozstone
Well-Known Member
Cinsi,
A good way to hook up those lights is simple, I am assuming your globes have the bayonet type ends? If so just buy some cheap reading lamps from wherever you can (Like $8 each) and break them apart so you just have the cord and plug, some of these even have a thread and nut that held them in place in the Lamp. What I did to make up a reflector was take a Silver Baking dish ( metal cookie tray About 45cm x 45 cm) and drill holes in the edges and screwed the Light connectors into the holes using the threaded ends, mind you you will have to dismantle the plug and rewire it to get the threaded ends through the holes, it might sound daunting but there is only two wires in there, just mark the wires so you get the right ones back in the right hole. I suspended the reflector with 5 globes with Small chain from a couple of points in the grow room, they work a treat, just make sure you have a fan blowing past the lights, I put all these into a 6 socket power board on a timer 18/6. Just an idea G/L
A good way to hook up those lights is simple, I am assuming your globes have the bayonet type ends? If so just buy some cheap reading lamps from wherever you can (Like $8 each) and break them apart so you just have the cord and plug, some of these even have a thread and nut that held them in place in the Lamp. What I did to make up a reflector was take a Silver Baking dish ( metal cookie tray About 45cm x 45 cm) and drill holes in the edges and screwed the Light connectors into the holes using the threaded ends, mind you you will have to dismantle the plug and rewire it to get the threaded ends through the holes, it might sound daunting but there is only two wires in there, just mark the wires so you get the right ones back in the right hole. I suspended the reflector with 5 globes with Small chain from a couple of points in the grow room, they work a treat, just make sure you have a fan blowing past the lights, I put all these into a 6 socket power board on a timer 18/6. Just an idea G/L