Mylar vs Panda Film vs Flat White Paint?

[jondamon]

I use to grow in a cabinet like that same setup it gets tight in there lol especially if your not using less

What a way to wake up and old thread.


but guess what. If you check this thread I posted about diamond reflective film back in 2011.

guess what else??

It’s still the same stuff on my walls to this day not needed to be replaced yet.

 

[Mr.Gr33nThumb]

What a way to wake up and old thread.


but guess what. If you check this thread I posted about diamond reflective film back in 2011.

guess what else??

It’s still the same stuff on my walls to this day not needed to be replaced yet. View attachment 5093963View attachment 5093964

I just changed my set up and went to panda film from a tent. I also switched from my led to a ceramic metal halide and hoping I made the right decision. I just changed my set up today and have to do alot of work yet to finish my set up to get it how I want it

 

[jondamon]

I just changed my set up and went to panda film from a tent. I also switched from my led to a ceramic metal halide and hoping I made the right decision. I just changed my set up today and have to do alot of work yet to finish my set up to get it how I want it

What LED was it? If it was blurple etc then yes you switched to a better light.

ive replaced my 400w HPS with a marshydro FCE3000.

This was my latest harvest.

Single plant grown in approx 2 gallons of coco weaved into a 3x3 scrog net.

 

[Mr.Gr33nThumb]

What LED was it? If it was blurple etc then yes you switched to a better light.

ive replaced my 400w HPS with a marshydro FCE3000.

This was my latest harvest.

Single plant grown in approx 2 gallons of coco weaved into a 3x3 scrog net.


View attachment 5094115

It was a blurple cheaper 300 watt and that looks great how much did you get off her

 

[jondamon]

It was a blurple cheaper 300 watt and that looks great how much did you get off her

Honestly I can’t answer that with any absolute certainty as I don’t often weigh my harvest.

however I do have a plastic lunch box that holds 4.5oz. I have 2 of these filled and a 2Litre mason jar half full and a large 8oz box that’s half full with this harvest and another from a previous grow lol.

along with the fact I’ve “lost” around 5oz too if you get what I mean

 

[jondamon]

It was a blurple cheaper 300 watt and that looks great how much did you get off her

So in real terms maybe 15-18oz although could be a little more.

Biggest problem is I tend to stagger harvest based on ripeness.

 

[Milky Weed]

I like the diamond mylar i think it diffuses the light alittle better than regular mylar or panda film

 

[Mr.Gr33nThumb]

S

Honestly I can’t answer that with any absolute certainty as I don’t often weigh my harvest.

however I do have a plastic lunch box that holds 4.5oz. I have 2 of these filled and a 2Litre mason jar half full and a large 8oz box that’s half full with this harvest and another from a previous grow lol.

along with the fact I’ve “lost” around 5oz too if you get what I mean

Sounds like a good harvest lol

 

[Mr.Gr33nThumb]

What LED was it? If it was blurple etc then yes you switched to a better light.

ive replaced my 400w HPS with a marshydro FCE3000.

This was my latest harvest.

Single plant grown in approx 2 gallons of coco weaved into a 3x3 scrog net.


View attachment 5094115

I haven't done a Scrog net yet but I want to give it a try on the next round I have about a 40"-46" space set up using the 315 watt cfl now. How long does your veg cycle get and do you have any pics through your cycle showing how you had your plant trained to turn out like that

 

[jondamon]

I haven't done a Scrog net yet but I want to give it a try on the next round I have about a 40"-46" space set up using the 315 watt cfl now. How long does your veg cycle get and do you have any pics through your cycle showing how you had your plant trained to turn out like that

MarsHydro FC-3000 grow

Hey folks. just starting this journal to document the usage of the @MarsHydrofactory FC-3000, 300w LED Panel. I will be using this light from start to finish using the dimming function to dial it down for starting seeds to cranking it up and rocking it during full flower. I will be utilising...

rollitup.org

 

[Coldnasty]

I don’t use anything at all. My plants are on a table in the center of a room so I can get full access. I hate scrogs, only use if the strain demands it or running clones. Don’t like using tents for the same reason. Just make it a pain for me. I’m sure I miss out on some yield but I grow only for head so idc. Used both though, never could tell any difference imho.

 

[Mr.Gr33nThumb]

I don’t use anything at all. My plants are on a table in the center of a room so I can get full access. I hate scrogs, only use if the strain demands it or running clones. Don’t like using tents for the same reason. Just make it a pain for me. I’m sure I miss out on some yield but I grow only for head so idc. Used both though, never could tell any difference imho.

Oh you said you had your last plant weaved through a scrog net

 

[Coldnasty]

Oh you said you had your last plant weaved through a scrog net

Yah. As stated above, only use it when I have to lol