Ghettogrower187
Well-Known Member
Looks nice n greasy she doesin house genetics sMACkin UK grown cali weed F52. View attachment 5153977
Looks nice n greasy she doesin house genetics sMACkin UK grown cali weed F52. View attachment 5153977
She is fire. I'm going 8 weeks this time, but next time I run them I am going to take them 10 or 11 weeksLooks nice n greasy she does
Aye they just say its critical+ crossed to a moisture resistant pheno of critical that makes up the 2.0 and nae problem pal anytime an that bluechi looks cracking toothanks man much appreciated. It was the flat Critical+ that’s one of my fav’s.
honestly never tried the 2.0 so may be worth a gander but so far I’m gonna be good for what’s going in to flower until the end of the year.
another BG41 grow with double layer scrog.
While this is growing out I’ll be popping some BLUCHI seeds and documenting for @Lemon king then once the main room is flowering I can sex some clones off the seed plants in the 12/12 area to confirm sex on the BLUCHI before they go in after the BG41 second run.
I'm having the same issue with one of my plants in flower, the top of the plant is yellow and I have no clue how to fix it. I have even tried flushing agents to remove any salt build up, but it never workedHas anyone seen/had this before, just one clone with yellowing leafs?
View attachment 5154703
I cut them about a week ago they were all nice and healthy.
View attachment 5154707
I can't remember ever seeing anything like that... Can anyone shed some light on it?
Sods law I had a big handful from each plant and kept a dud lol?
That particular pheno is really compact but its flowers are less well developed than the sister.
View attachment 5154714
It's the plant at the back right corner you can see its behind the others but it's not necessarily bad i've found some plants are slower to develop then start filling out later on.
This is abit out there when it comes to risk, and pretty much against a lot of info out there, but lately I’ve been running a lot higher rh and temp all the way upto like week 6 on a 9 weeker, i defoliate a lot though. the key is having the leaf temp higher so there’s no condensation on the plant surfaces. I find the plants like 30c ambient at the explosive part of flower when using leds. With some phenos I reckon I could go higher.@harrychilds thanks for the suggestion but
It doesn't matter what I do the air coming in is always going to be 90+ rh%.
Dealing with high humidity has been an ongoing fight, my controller doesn't switch off the fan it just swaps between speeds so there's constant air going through...in summer I mean.
In the warmer weather humid air is harder to deal with because its already heated, during winter its humid but just heating cold air drops its hunidy considerably so I manage it.
Using 300w of light I'm reluctant to use a 12ltr and a 20ltr dehumidifier = 460w that would be
Thinking back I (mostly) got away with the humidity using inferior ventilation methods, at the time idk shit about ventilation.
My ventilation now is infinitely better so I'm going to try this run without the dehumidifier.
I've thought about taking away absolutely everything except the absolute prime sites and leave maybe 9/12" on each stalk?
I’ve ONLY seen this when cloning haha, every single one of mine turns yellow lmao, urs look healthy af, must just be an anomaly.Has anyone seen/had this before, just one clone with yellowing leafs?
View attachment 5154703
I cut them about a week ago they were all nice and healthy.
View attachment 5154707
I can't remember ever seeing anything like that... Can anyone shed some light on it?
Sods law I had a big handful from each plant and kept a dud lol?
That particular pheno is really compact but its flowers are less well developed than the sister.
View attachment 5154714
It's the plant at the back right corner you can see its behind the others but it's not necessarily bad i've found some plants are slower to develop then start filling out later on.
Post a pic, could it not be light toxicity?I'm having the same issue with one of my plants in flower, the top of the plant is yellow and I have no clue how to fix it. I have even tried flushing agents to remove any salt build up, but it never worked
I can't get a photo at the minute, but it's 100% not light toxicity because I have a plant that is even closer to the light and it's perfectly finePost a pic, could it not be light toxicity?
Ah ok mate, that allways seems to be the only yellowing I get, feel like I’m forever lifting lightsI can't get a photo at the minute, but it's 100% not light toxicity because I have a plant that is even closer to the light and it's perfectly fine
My circumstances are a bit different to yours cloning is pretty straightforward, tap water and light there's not much to go wrong, all else being equal why would just one yellow?I'm having the same issue with one of my plants in flower, the top of the plant is yellow and I have no clue how to fix it. I have even tried flushing agents to remove any salt build up, but it never worked
What I've found key is dim lighting and a reasonable amount of humidity to keep them green healthy looking.I’ve ONLY seen this when cloning haha, every single one of mine turns yellow lmao, urs look healthy af, must just be an anomaly.
I have the same t5 system hung above my propagator but I only use 2 tubes in it, my friend puts his propagator inside a white bin bag on the floor of his tent, his always look like yours. My cloning skills however leave a lot to be desired, just call me yellow thumb! HahaMy circumstances are a bit different to yours cloning is pretty straightforward, tap water and light there's not much to go wrong, all else being equal why would just one yellow?
What I've found key is dim lighting and a reasonable amount of humidity to keep them green healthy looking.
I use 4x T5s for veg which is too much for clones so I've had my share of yellowing (not like the above) now when I'm vegging other plants i put up a defuser lol...
View attachment 5154861
It's only fine mesh but cuts the light intensity.
Not much happening for me.It's been awfy quite around here folks what's happening in your grow that's keeping you busy?
That clone and its sister yellowed like something from a scary movie, both rooted in a reasonable time frame.
View attachment 5159233
The other clones are also rooted, potted and looking fine, you can see the freshly potted ones above.
View attachment 5159237
I've cut a few a few more to see if they go the same way?
Nothing wrong with being like a squirrel stocking up for winter lol i just wish it was a tad more 420 friendly in the uk give it time i guess that will change when idk but yeah surely it willNot much happening for me.
been having a little time to myself while keeping the BG41 clones alive lol.
been enjoying the direct debit savings while the 300w is off lol.
gotta clean down and get going again soon lol.
must have around 20oz in my house atm though lol.
Don’t get me wrong I like having an abundance.Nothing wrong with being like a squirrel stocking up for winter lol i just wish it was a tad more 420 friendly in the uk give it time i guess that will change when idk but yeah surely it will
I haven't got a clue dude, I never did figure it out. I chopped them and it's the best stuff I have smoked in my life, a little bud of it stinks out the whole pub.My circumstances are a bit different to yours cloning is pretty straightforward, tap water and light there's not much to go wrong, all else being equal why would just one yellow?
What I've found key is dim lighting and a reasonable amount of humidity to keep them green healthy looking.
I use 4x T5s for veg which is too much for clones so I've had my share of yellowing (not like the above) now when I'm vegging other plants i put up a defuser lol...
View attachment 5154861
It's only fine mesh but cuts the light intensity.
That sounds like my kind of pub lol, I'm not much of drinker but when I do have one I want a joint with it.I haven't got a clue dude, I never did figure it out. I chopped them and it's the best stuff I have smoked in my life, a little bud of it stinks out the whole pub.
Fair doos i prefer rosin myself and agreed man theres worse problems to have for sureDon’t get me wrong I like having an abundance.
just need to buy a new blast tube to make some BHO for dabbing.
reduces the amount of dried flower I have around that way lol.