Trusted clone vendors on strainly

fatAngel

Well-Known Member
If I were to drop that money on a clone I would try from a bank like brotanicalgardens or another seed bank. I know some now offer clones but I can only remember brotanical right now.

Edit: beleaf site boomfiya.com has clones
 

Hoss8455

Well-Known Member
If I were to drop that money on a clone I would try from a bank like brotanicalgardens or another seed bank. I know some now offer clones but I can only remember brotanical right now.

Edit: beleaf site boomfiya.com has clones
I've heard brotanical skims off the freebies that come with exotic Genetics packs
 

Gentlemencorpse

Well-Known Member
Typical RIU, forget answering OPs question, tell him why he's wrong for asking it!!

I've had good luck with Auntie Jane's Nursery. They post all their pathogen testing results online and I've never heard of anyone getting a bad cut from them. I've also had good results from Pink Box though some people on here said they had issues. And PNWStrainhunter is solid but he doesn't appear to have anything listed right now.

GMO Rootbeer is absolutely fire if your looking for a good clone only cut to run for a bit by the way. Which, if you want the legitest of clones, grabbing Skunktek gear when it drops is the way to go. It ain't cheap, but your definitely getting the heat, and it's definitely clean cuts. Unfortunately, it means following him on IG which can be inconvenient if you know, you don't use IG
 

slacker140

Well-Known Member
Breeders seeds direct does clones for reasonable prices and are hplvd tested and they ship for cheap. It's not strainly but so far I'd rather trust them over the strainly vendors I've seen.
 

Rurumo

Well-Known Member
When you get your first clone, be sure to quarantine it OP, and give it some aggressive IPM every 2nd or 3rd day for 2 weeks-citric acid, neem oil, insecticidal soap, etc, plus Southern Ag GFF. Some Strainly peeps deal in such volume, especially the resellers of CA dispensary clones, that you need to treat them as though they are infected with mites/PM from the get-go. I also had a good experience with Auntie Jane-just find any open listing of theirs and send them a message to see what they have available or to ask questions. Make sure you buy HpLVd tested cuts and also be sure you have your cloning game down if you buy "snips" rather than rooted clones-I prefer unrooted cuttings personally, I find you can get them off to a much better start if you root them yourself. Make sure you know how a strainly transaction works too, it's a little irritating and a lot like Ebay in the old wild west days when it was still possible to get ripped off.
 
Typical RIU, forget answering OPs question, tell him why he's wrong for asking it!!

I've had good luck with Auntie Jane's Nursery. They post all their pathogen testing results online and I've never heard of anyone getting a bad cut from them. I've also had good results from Pink Box though some people on here said they had issues. And PNWStrainhunter is solid but he doesn't appear to have anything listed right now.

GMO Rootbeer is absolutely fire if your looking for a good clone only cut to run for a bit by the way. Which, if you want the legitest of clones, grabbing Skunktek gear when it drops is the way to go. It ain't cheap, but your definitely getting the heat, and it's definitely clean cuts. Unfortunately, it means following him on IG which can be inconvenient if you know, you don't use IG

A healthy plant can keep pathogens at bay the same way healthy people keep herpes at bay until there is a stress like a cold/flu or in a plant LIKE CLONING. "testing" doesn't tell you the cycle threshold used or viral load present.

Tons of scammers on strainly. An example would be a guy selling ecsd and you scroll his feedback and find one of his first interactions was buying a pack of SD from shoreline genetics. What exactly are you buying?
 

ProPheT 216

Well-Known Member
I was impressed by what I saw from green wolf genetics. They ship rooted clones in a tube with a little led to provide constant light while shipping

 
"tested"

With what cycle threshold? And is the lab affiliated with any of these dealers? What specifically are you testing for? Share all data, public, open source.
 

Gentlemencorpse

Well-Known Member
"testing" doesn't tell you the cycle threshold used or viral load present.
Testing does tell you the "viral load" present... that's the whole point. Otherwise what are you suggesting they're testing for?

"tested"

With what cycle threshold? And is the lab affiliated with any of these dealers? What specifically are you testing for? Share all data, public, open source.
Well I'm not testing for anything, I just grow the shit... as for what the vendor is testing for, obviously that varies. You ask all valid questions worth seeking answers too... but the questions themselves are not deterrents in my mind. There's always a risk association with taking in clones, whether from an online vendor or your beastie. That's why I highly recommend quarantine for any cut you take in before introducing it to the general populace no matter the source.
 
Testing does tell you the "viral load" present... that's the whole point. Otherwise what are you suggesting they're testing for?



Well I'm not testing for anything, I just grow the shit... as for what the vendor is testing for, obviously that varies. You ask all valid questions worth seeking answers too... but the questions themselves are not deterrents in my mind. There's always a risk association with taking in clones, whether from an online vendor or your beastie. That's why I highly recommend quarantine for any cut you take in before introducing it to the general populace no matter the source.

MY point is the "healthy" mom might pass the cycle threshold while the snips/cutting/clones will be loaded with virus...............eventually as the stress builds. MOM Passed testing...........but still has herpes because the test was designed NOT(cycle threshold) to find it.
 

Gentlemencorpse

Well-Known Member
MY point is the "healthy" mom might pass the cycle threshold while the snips/cutting/clones will be loaded with virus...............eventually as the stress builds. MOM Passed testing...........but still has herpes because the test was designed NOT(cycle threshold) to find it.
Can you cite anything to suggest that cuts from a mom that tested clean for Hop Latent Viroid can still carry and spread the virus, or what threshold people should be looking for here to best ensure the cut is clean? Like, if your knowledgeable on the subject please enlighten us. Right now your just typing buzzwords that are probably meaningless to the vast majority of readers.

I dont believe stress is as big of a factor here as you suggest. A healthy plant may be better able to combat the symptoms of the virus better than a stressed plant but the virus still needs to be present in either case... it's not like stress causes the virus to appear. And I've never seen anything to suggest a stressed plant is any more likely to pass it along than a healthy plant. I mean, that's basically how it became such an issue in the first place, perfectly healthy looking plants can be contagious
 
Can you cite anything to suggest that cuts from a mom that tested clean for Hop Latent Viroid can still carry and spread the virus, or what threshold people should be looking for here to best ensure the cut is clean? Like, if your knowledgeable on the subject please enlighten us. Right now your just typing buzzwords that are probably meaningless to the vast majority of readers.

I dont believe stress is as big of a factor here as you suggest. A healthy plant may be better able to combat the symptoms of the virus better than a stressed plant but the virus still needs to be present in either case... it's not like stress causes the virus to appear. And I've never seen anything to suggest a stressed plant is any more likely to pass it along than a healthy plant. I mean, that's basically how it became such an issue in the first place, perfectly healthy looking plants can be contagious

Look around you.

Are you being purposely obtuse? Cite your sources! Cite your sources? Let's go in circle? If this problem came down to simple testing it would be over already.
 

Gentlemencorpse

Well-Known Member
Look around you.

Are you being purposely obtuse? Cite your sources! Cite your sources? Let's go in circle? If this problem came down to simple testing it would be over already.
Testing helps avoidance in home grows, control and elimination on a larger scale is far more complicated. I'm most certainly not the one being obtuse here lol.
 

zatoichi2

Well-Known Member
Strainly is a scammer site. They have BS checkout which never works. Their sellers send clones infected with mold that will die anywhere from day you get them to months later. Complain to strainly and they say you did not use their system and can not leave feedback. As soon as a seller has a problem they change their name. They just did that this weekend with Danky Ass becoming Legit Cuts. They not only aid and abet scammers, they are also infecting peoples gardens,
 
Last edited:
Top